Bluetooth: hci_sock: validate event length before filtering
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: validate event length before filtering
is_filtered_packet() reads the event code from skb->data[0] without first
checking that the skb is nonempty. When an opcode filter is configured,
it also reads the command opcode at offsets 3 or 4 without checking that
a Command Complete or Command Status event is long enough.
hci_send_to_sock() invokes the filter before hci_event_packet() validates
the event header. A malformed event supplied by a controller or a vhci
device can therefore cause an out-of-bounds read.
Keep the unmasked event code for the opcode c
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sock: reject out-of-range OCF values
The raw HCI socket security filter has 128 OCF bits per supported OGF,
but masks the 10-bit OCF with 127 before looking up the command. An
unprivileged socket can therefore submit a reserved OCF that aliases an
allowlisted command modulo 128.
A conforming controller should reject reserved opcodes. Nevertheless,
the security decision must apply to the opcode that will actually be
sent, especially since controller-specific behavior is outside the host
stack's control.
Reject OCF values that cannot be represented by the sec
Bluetooth: ISO: balance the parent hold in hci_bind_bis()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: balance the parent hold in hci_bind_bis()
hci_conn_link() takes a lifetime reference to its parent with
hci_conn_get(), but only takes an operational hold on the child.
hci_conn_unlink() later balances both a hold and a reference on the
parent.
The SCO and CIS paths pass a parent acquired from a connect helper, so
it already has a hold. For an additional BIS, hci_bind_bis() obtains the
parent from hci_conn_hash_lookup_big(), which returns a bare pointer.
Unlinking the child then drops the parent's existing hold and can
schedule it for disconnection while it
Bluetooth: ISO: release unused CIS holds after channel attach
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: release unused CIS holds after channel attach
hci_bind_cis() and hci_connect_cis() return one hci_conn hold for the
ISO layer. A new channel association consumes that hold, which is
eventually released by iso_conn_free().
There are two cases where iso_chan_add() does not create an association:
it returns success when the socket is already attached to the same
iso_conn, and it returns -EBUSY when another socket is attached. The
hold returned for the current call is unused in both cases. This occurs
when deferred setup calls iso_connect_cis() again for its
Bluetooth: L2CAP: validate frame length before control and FCS access
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate frame length before control and FCS access
l2cap_data_rcv() unpacks either a two-byte or four-byte control field
without first ensuring that it is present. A short ERTM or streaming-mode
frame can therefore cause an out-of-bounds read.
There is a second short-frame case when CRC16 is enabled. After the
control field is pulled, l2cap_check_fcs() subtracts two from skb->len
without checking it. If fewer than two bytes remain, the subtraction
wraps; skb_trim() leaves the buffer unchanged and the subsequent FCS
load reads past the logical end of the
Bluetooth: mgmt: fix race in read_unconf_index_list()
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix race in read_unconf_index_list()
read_unconf_index_list() counts unconfigured controllers before allocating
its response, then checks the device flags again while filling it.
hci_dev_list_lock stabilizes list membership, but it does not serialize the
per-device flags. During asynchronous controller setup, the worker can set
HCI_UNCONFIGURED and clear HCI_SETUP between the two passes. A controller
omitted from the allocation count can then become eligible for the fill
pass, causing an out-of-bounds write to rp->index[].
Allocate space for every device
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: fix NULL dereference of dlc->session in RFCOMM_CONNINFO
The RFCOMM_CONNINFO getsockopt handler accepts a socket that is not
connected as long as deferred setup is enabled:
if (sk->sk_state != BT_CONNECTED &&
!rfcomm_pi(sk)->dlc->defer_setup) {
err = -ENOTCONN;
break;
}
l2cap_sk = rfcomm_pi(sk)->dlc->session->sock->sk;
dlc->defer_setup is set in rfcomm_sock_init() when rfcomm_connect_ind()
creates a child socket for an incoming connection on a listening socket
that has BT_DEFER_SETUP enabled. It is never cleared afterwards. The
session, howeve
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix create context out-of-bounds reads
smb2_parse_contexts() validates the complete create-context area but
does not limit each record to its Next field before dispatching it. A
malformed chain can therefore expose bytes beyond the current context to
a handler. The QFid handler also used a full response-structure cast
although it only reads DiskFileId.
The SMB2/SMB3 lease parsers made the same layout assumption: they read
LeaseState and LeaseFlags at canonical offsets rather than at
DataOffset. A valid non-canonical DataOffset could therefore yield
unrelate
smb: client: close handle after create-context parsing failure
In the Linux kernel, the following vulnerability has been resolved:
smb: client: close handle after create-context parsing failure
SMB2_open() accounts a successful CREATE response as a remote open before
parsing its create contexts. If smb2_parse_contexts() rejects malformed
context data, SMB2_open() returns without closing the handle, leaving the
server-side handle open and num_remote_opens elevated.
Close the handle after a post-CREATE context parsing failure so the error
path releases the remote resource and balances the open count.
smb: client: clean up failed cached directory opens
In the Linux kernel, the following vulnerability has been resolved:
smb: client: clean up failed cached directory opens
open_cached_dir() sends CREATE and QUERY_INFO as a compound request. If
the CREATE succeeds but a later command returns an error, the function
must retain the CREATE FID so common cleanup can issue SMB2_close(). It
also must not treat a response error as a valid CREATE.
Validate the CREATE response before using its fields, record the FIDs, and
mark the handle open before handling errors from later compound commands.
Move the -EREMCHG reconnect handling before response validation so a
missing response does not hide the rec
smb: client: use finish_no_open() for non-regular inodes
In the Linux kernel, the following vulnerability has been resolved:
smb: client: use finish_no_open() for non-regular inodes
An O_CREAT open can find an existing symlink or another non-regular
inode. cifs_atomic_open() calls finish_open() on it and attaches a
cifsFileInfo. Symlink inodes have no CIFS release operation, so the
dentry reference held by cifsFileInfo is leaked. FMODE_OPENED also
prevents the VFS from following the symlink.
Track whether cifs_do_create() returned an open server handle. For
non-regular inodes, close the handle if present, remove the pending
open, and call finish_no_open() so the VFS can continue the lookup.
Do n
smb: client: close completed creates on compound wait errors
In the Linux kernel, the following vulnerability has been resolved:
smb: client: close completed creates on compound wait errors
compound_send_recv() waits for responses in order. If a later wait is
interrupted, or if a later MID fails during response synchronization, an
earlier CREATE may already have opened a remote handle. The earlier mid
is then released without invoking handle_cancelled_mid(), leaving the
remote handle open because no FID was copied to the caller.
Mark completed earlier mids as cancelled when a compound wait or MID
synchronization aborts. Keep their response buffers attached while the
MIDs are synchronized, and transf
smb: client: delete compound mids on send failure before unlock
In the Linux kernel, the following vulnerability has been resolved:
smb: client: delete compound mids on send failure before unlock
When sending a compound request fails, smb_send_rqst() kicks off a
reconnect. compound_send_recv() still has those mids on pending_mid_q,
but it unlocks the server without removing them first.
During reconnect, cifs_abort_connection() walks pending_mid_q and runs
each mid callback. With no response yet, those callbacks return credits
and drop in_flight. Then compound_send_recv()'s send-error path returns
the same credits again. in_flight ends up decremented twice and
smb2_add_credits() WARNs.
syzbot hits this
In the Linux kernel, the following vulnerability has been resolved:
xfs: release orphanage dir inode if chown fails
LOLLM points out that we leak the igrab'd reference to the orphanage
directory inode if chowning it fails. Fix that.
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix wild memcpy access when formatting ondisk rtrefcount btree roots
LOLLM noticed that the inode btree root formatting methods copy too many
bytes -- there's only one set of keys in node blocks, not two. This
causes memory corruption of whatever's beyond the buffers.
xfs: don't let hidden_space go negative in xfs_metafile_resv_init
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't let hidden_space go negative in xfs_metafile_resv_init
LOLLM points out that if the amount of fdblocks that we can reserve for
a metadata btree file goes below the space already used by that file,
then the hidden_space subtraction can underflow, causing
xfs_dec_fdblocks to subtract a huge amount of space. We never want the
target to be less than the used sapce, so fix the logic that adjusts
dblocks_avail downwards.
Also fix an error in the adjacent comment.
xfs: don't let memory failures leak blocks and kill repairs
In the Linux kernel, the following vulnerability has been resolved:
xfs: don't let memory failures leak blocks and kill repairs
LOLLM complains that a memory allocation failure in
xrep_newbt_add_blocks results in online repair leaking blocks that were
previously allocated to write a new btree, but the problem is worse than
that -- a limitation of the codebase is that the callers cannot undo the
transaction /and/ return the error -- either you undo all changes and
commit the transaction, or you error out and the filesystem goes down.
However, the new btree space reservation object isn't that big (~48
bytes). Let's just do a NOFAIL allocati
xfs: drop dquot flush lock when we can't find a buffer to flush
In the Linux kernel, the following vulnerability has been resolved:
xfs: drop dquot flush lock when we can't find a buffer to flush
LOLLM noticed that xfs_qm_flush_one fails to drop the dquot flush lock
if it can't grab the buffer associated with the dquot. Since there's no
buffer, nobody else is going to drop the dqflock, so we need to do it
ourselves.
xfs: fix cursor and pointer handling when recovering iunlink buckets
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix cursor and pointer handling when recovering iunlink buckets
LOLLM pointed out a bug in xlog_recover_iunlink_bucket:
1. We don't null out prev_ip after releasing it, which can lead to UAF
problems if the inodegc flush call in the loop fails.
at which point I noticed even more bugs:
2. If the inodegc flush inside the loop fails, we also leak @ip.
3. We set prev_agino to agino having already advanced agino, which
results in inodes with i_prev_unlinked set to itself.
4. If we exit the bottom of the loop with prev_ip set, then prev_ip
aliases ip and we als
net/sched: act_ct: fix helper UAF due to extensions realloc
In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ct: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while removing the