p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-oem-6.17 · Page n° 185

Vulnérabilités publiées pour linux-oem-6.17 au cours des 30 derniers jours : 945. Présentes dans le catalogue KEV : 0.

RSS ↗ JSON ↗
Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 7859

  1. CVE-2026-72138

    Non évaluéeEPSS 0,22%Aucun correctif publié

    xen/gntdev: fix error handling in ioctl

    In the Linux kernel, the following vulnerability has been resolved: xen/gntdev: fix error handling in ioctl When gntdev_ioctl_map_grant_ref() fails to copy the operation result back to userspace after successfully adding the mapping to the list, the error path returns -EFAULT without releasing the reference acquired by gntdev_alloc_map(). The mapping remains in priv->maps with a refcount of 1, causing a memory leak and a dangling list entry. Additionally, gntdev_add_map() may modify map->index to avoid overlap with existing mappings. Therefore, the index returned to userspace must be obtained after gntdev_add_map() completes. Fix this by

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  2. CVE-2026-72137

    Critique · CVSS 9.8EPSS 0,71%Aucun correctif publié

    xfrm: nat_keepalive: avoid double free on send error

    In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6 send helper reports an error. That cleanup is only correct before the skb is handed to the output path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the networking stack may already have consumed the skb before returning an error, so freeing it again is unsafe. Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4() and nat_keepalive_send_ipv6(), where the caller still owns the skb, and keep nat_keepalive_send() responsib

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  3. CVE-2026-72136

    Élevée · CVSS 8.8EPSS 0,17%Aucun correctif publié

    xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink

    In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed.

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  4. CVE-2026-72135

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    tpm: Make the TPM character devices non-seekable

    In the Linux kernel, the following vulnerability has been resolved: tpm: Make the TPM character devices non-seekable The TPM character devices expose a sequential command/response interface, but their open handlers leave FMODE_PREAD and FMODE_PWRITE enabled. After a command leaves a response pending, pread(fd, buf, 16, 0x1400) passes 0x1400 as *off to tpm_common_read(). The transfer length is bounded by response_length, but the offset is used unchecked when forming data_buffer + *off. A sufficiently large offset therefore causes an out-of-bounds heap read through copy_to_user() and, if the copy succeeds, an out-of-bounds zero-write through

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  5. CVE-2026-72133

    Élevée · CVSS 8.4EPSS 0,18%Aucun correctif publié

    spi: uniphier: Fix completion initialization order before devm_request_irq()

    In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ.

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  6. CVE-2026-72132

    Non évaluéeEPSS 0,21%Aucun correctif publié

    NFS: Charge unstable writes by request size, not folio size

    In the Linux kernel, the following vulnerability has been resolved: NFS: Charge unstable writes by request size, not folio size nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per *request* added to or removed from a commit list. This is correct only when a folio has a single associated request. When pg_test splits a folio into N sub-folio requests (e.g. pNFS flexfiles striping with a stripe unit smaller than the folio size, or plain wsize-limited splitting), each of the N requests independently charges the whole folio's page count, inflating the accounting b

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  7. CVE-2026-72130

    Critique · CVSS 9.8EPSS 0,8%Aucun correctif publié

    nvmet-auth: reject short AUTH_RECEIVE buffers

    In the Linux kernel, the following vulnerability has been resolved: nvmet-auth: reject short AUTH_RECEIVE buffers nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length after checking only that it is nonzero and matches the transfer length. In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF initiator reach the fixed-size DH-HMAC-CHAP response builders with a kmalloc() buffer shorter than the response, so nvmet_auth_success1() and nvmet_auth_failure1() write past the allocation; both only WARN_ON the short length and then format the message anyway. Impact: A remote NVMe-oF initiator with access to an aut

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  8. CVE-2026-72129

    Critique · CVSS 9.8EPSS 0,71%Aucun correctif publié

    nvmet-rdma: handle inline data with a nonzero offset

    In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  9. CVE-2026-72128

    Non évaluéeEPSS 0,2%Aucun correctif publié

    nvmet: fix refcount leak in nvmet_sq_create()

    In the Linux kernel, the following vulnerability has been resolved: nvmet: fix refcount leak in nvmet_sq_create() In nvmet_sq_create(), a reference on the ctrl is taken via kref_get_unless_zero() before calling nvmet_check_sqid(). If nvmet_check_sqid() fails, the function returns the error directly without releasing the reference, leading to a leak. Fix this by jumping to the "ctrl_put" label, which already performs the necessary nvmet_ctrl_put(ctrl). This ensures the reference is properly released on this error path.

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  10. CVE-2026-72127

    Non évaluéeEPSS 0,21%Aucun correctif publié

    netdev-genl: report NAPI thread PID in the caller's pid namespace

    In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c257098

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  11. CVE-2026-72126

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    can: isotp: use unconditional synchronize_rcu() in isotp_release()

    In the Linux kernel, the following vulnerability has been resolved: can: isotp: use unconditional synchronize_rcu() in isotp_release() isotp_notify() unregisters the (RCU) CAN filters via can_rx_unregister() and clears so->bound without waiting for a grace period. isotp_release() uses so->bound to decide whether it needs to call synchronize_rcu() before cancelling so->rxtimer, so when NETDEV_UNREGISTER runs first it skips that synchronize_rcu() and can cancel the timer while an in-flight isotp_rcv() is still executing and about to re-arm it via isotp_send_fc(), leading to a use-after-free timer callback on the freed socket. sakisho-bot rem

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  12. CVE-2026-72125

    Élevée · CVSS 7.8EPSS 0,16%Aucun correctif publié

    can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER

    In the Linux kernel, the following vulnerability has been resolved: can: isotp: fix use-after-free race with concurrent NETDEV_UNREGISTER isotp_release() looked up the bound network device via dev_get_by_index() using the stored ifindex. During device unregistration the device is unlisted from the ifindex hash before the NETDEV_UNREGISTER notifier chain runs, so a concurrent isotp_release() could find no device, skip can_rx_unregister() entirely, and still proceed to free the socket. Since isotp_release() had already removed itself from the isotp notifier list at that point, isotp_notify() would never get a chance to clean up either, leavin

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  13. CVE-2026-72124

    Élevée · CVSS 8.8EPSS 0,35%Aucun correctif publié

    can: isotp: serialize TX state transitions under so->rx_lock

    In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  14. CVE-2026-72123

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op() with call_rcu() and introduced the RX_NO_AUTOTIMER flag. However, this flag check was omitted for thrtimer in the packet rx fast-path. During BCM RX operation teardown, a concurrent RCU reader (bcm_rx_handler) can race and re-arm thrtimer via bcm_rx_update_and_send() after call_rcu() has been scheduled. Once the RCU grace period elapses, bcm_op is freed. The subsequently f

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  15. CVE-2026-72122

    Élevée · CVSS 7.3EPSS 0,16%Aucun correctif publié

    can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix lockless bound/ifindex race and silent RX_SETUP failure bcm_sendmsg() reads bo->ifindex and checks bo->bound before taking lock_sock(), while bcm_notify(), bcm_connect() and bcm_release() all mutate both fields under that same lock. Because the lockless reads and the locked writes are unordered with respect to each other, a racing bcm_notify() (device unregister) or bcm_connect() (concurrent bind on another thread sharing the socket) can make bcm_sendmsg() observe an inconsistent combination, e.g. a stale bound=1 together with the now-cleared ifindex=0, silent

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  16. CVE-2026-72121

    Élevée · CVSS 8.8EPSS 0,35%Aucun correctif publié

    can: bcm: add locking when updating filter and timer values

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buff

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  17. CVE-2026-72120

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    can: bcm: add missing rcu list annotations and operations

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  18. CVE-2026-72119

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    can: bcm: extend bcm_tx_lock usage for data and timer updates

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  19. CVE-2026-72118

    Non évaluéeEPSS 0,22%Aucun correctif publié

    can: bcm: fix CAN frame rx/tx statistics

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix CAN frame rx/tx statistics KCSAN detected a data race within the bcm_rx_handler() when two CAN frames have been simultaneously received and processed in a single rx op by two different CPUs. Use atomic operations with (signed) long data types to access the statistics in the hot path to fix the KCSAN complaint. Additionally simplify the update and check of statistics overflow by using the atomic operations in separate bcm_update_[rx|tx]_stats() functions. The rx variant runs under bcm_rx_update_lock to prevent races when resetting the two rx counters; the tx

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  20. CVE-2026-72117

    Non évaluéeEPSS 0,22%Aucun correctif publié

    can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler()

    In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex

    linux-oem-6.17Systèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →