mm/hugetlb: do not dissolve gigantic pages without runtime support
In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: do not dissolve gigantic pages without runtime support
dissolve_free_hugetlb_folio() doesn't check
hstate_is_gigantic_no_runtime(h) though remove_hugetlb_folio()/
update_and_free_hugetlb_folio() silently bail for such folios, so it frees
a still-listed folio and, on vmemmap restore failure, the
add_hugetlb_folio() rollback corrupts the free list.
mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold()
In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold()
damon_hugetlb_mkold() reads the page table entry into a local variable,
unsets the accessed bit in the variable, and updates the page table entry
with the updated variable value. If hardware updates the same page table
entry in parallel, the hw updates could be lost. For example,
hardware-updated dirty bits might be lost.
Avoid the parallel updates by clearing the page table entry when reading
it together, using huge_ptep_get_and_clear(). If a parallel write to the
memory is made after the clearing
PCI: of_property: Omit bus properties without a subordinate bus
In the Linux kernel, the following vulnerability has been resolved:
PCI: of_property: Omit bus properties without a subordinate bus
A bridge (a device with a Type 1 header) may not have a secondary bus
allocated (pdev->subordinate), e.g., if there are no available bus numbers
or the bridge secondary/subordinate bus numbers are not writable.
The dynamic OF helpers of_pci_prop_bus_range() and of_pci_prop_intr_map()
dereference pdev->subordinate without checking it. When
CONFIG_PCI_DYNAMIC_OF_NODES is enabled, this can cause a NULL pointer
dereference and early boot hang.
Generate 'bus-range' and 'interrupt-map' properties only when a subor
packet: use ubuf_info completion for TX_RING packets
In the Linux kernel, the following vulnerability has been resolved:
packet: use ubuf_info completion for TX_RING packets
tpacket_snd sends skbs with frags pointing into its ring slots. Slots
are released when skb->destructor is called.
A call to skb_orphan calls skb->destructor before the skb is freed.
This can cause the slot to be reused while still linked into the skb.
Switch to standard zerocopy completion (ubuf_info) so the slot is only
released once all references to the payload are freed or copied.
Restore skb->destructor to standard sock_wfree.
The ubuf_info completion callback can be called with a NULL skb, but
only from net_zcop
HID: alps: unregister DualPoint Stick input device on remove
In the Linux kernel, the following vulnerability has been resolved:
HID: alps: unregister DualPoint Stick input device on remove
alps_input_configured() allocates a second input device ("DualPoint
Stick") with input_allocate_device() and registers it, but the
alps_driver struct has no .remove handler and input2 is not tracked in
hdev->inputs. The default remove path (hid_hw_stop -> hidinput_disconnect)
only iterates hdev->inputs, so input2 is never unregistered and leaks
on every device removal.
Add a .remove handler that stops the device first (preventing URB
callbacks from touching input2 during teardown) and then unregisters
input2.
HID: alps: fix use-after-free on input2 registration failure
In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix use-after-free on input2 registration failure
alps_input_configured() stores data->input2 before calling
input_register_device(). If registration fails, input_free_device()
frees the input device but data->input2 still points to the freed memory.
alps_input_configured() calls hid_hw_open() before allocating input2, so
URBs are already active and raw_event can fire during the failure window.
A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event()
to dereference the freed data->input2 -> use-after-free.
Fix by only storing input2 into drvdata af
HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce()
In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: fix OOB read in wacom_wac_pen_serial_enforce()
The 'wacom_wac_pen_serial_enforce()' function may calculate and pass an
invalid offset to hid_field_extract(), resulting in memory reads at
incorrect addresses -- possibly beyond the end of the report. If a
field in the HID descriptor lists more usages than its Report Count
actually reserves space for, the function's inner 'j' will walk past
the end of the field:
for (i = 0; i < report->maxfield; i++) {
for (j = 0; j < report->field[i]->maxusage; j++) {
...
value = hid_field_extract(hdev, raw_data + 1,
net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get()
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix rev_entry reference leak in mlx5_tc_ct_shared_counter_get()
When the reverse entry is found but its counter is already being
released, refcount_inc_not_zero() fails and the reference taken by
mlx5_tc_ct_entry_get() is never dropped before falling through to
create_counter. Drop it so the reverse entry is not kept alive forever
by a shared counter lookup that did not use it.
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix swapped IPv6 IPsec policy masks
IPv6 XFRM policies may use different source and destination prefix
lengths. mlx5e_ipsec_policy_mask() builds the corresponding masks
independently, but setup_fte_addr6() installs each mask in the opposite
address field.
When the prefix lengths differ, this makes the source match use the
destination prefix and the destination match use the source prefix. The
resulting hardware rule can both miss traffic covered by the policy and
match traffic outside it.
Install each mask in its corresponding match field.
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
In the Linux kernel, the following vulnerability has been resolved:
net: airoha: npu: cancel wdt_work after releasing the WDT IRQ
airoha_npu_remove() calls cancel_work_sync() on each core's wdt_work,
but the watchdog IRQ that queues it is requested with devm_request_irq()
and is freed only after .remove() returns. airoha_npu_wdt_handler() can
therefore schedule_work() again once the cancel has returned. struct
airoha_npu, which contains the work, is devm_kzalloc()'d and is freed in
that same unwind, so the late work dereferences freed memory.
Register the work with devm_work_autocancel() before devm_request_irq()
and drop .remove(). Dev
In the Linux kernel, the following vulnerability has been resolved:
net: arp: terminate device name before lookup
The ARP ioctl copies a user-provided struct arpreq into a stack object. Its
arp_dev field may contain IFNAMSIZ bytes without a NUL terminator.
Such input is passed to dev_get_by_name_rcu() or __dev_get_by_name(), where
strcmp() can read past the end of the stack object when a matching
alternative interface name exists.
Terminate the field before the lookup to prevent the out-of-bounds read.
net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read
In the Linux kernel, the following vulnerability has been resolved:
net: atl1: fix soft lockup on out-of-range cmb_tpd_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range cmb_tpd_next_to_clean (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. Treat it as
"nothing new to clean" instead.
In the Linux kernel, the following vulnerability has been resolved:
net: ipconfig: bound DHCP option construction
ic_dhcp_init_options() appends the hostname (option 12), vendor-class
(option 60) and client-ID (option 61) options into the fixed 312-byte
bootp_pkt.exten[] buffer. Only the client-ID branch checked the
remaining space; the hostname and vendor-class writes were unbounded.
A 64-byte hostname together with the maximum 252-byte dhcpclass=
identifier needs 18 + (2 + 64) + (2 + 252) = 338 of the 312 available
bytes even before the terminating END marker, so the vendor-class memcpy
runs past the end of exten[]. With CONFIG_FORTIFY
net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths
In the Linux kernel, the following vulnerability has been resolved:
net: macb: fix dma_alloc_coherent() leak on macb_alloc() error paths
Fix 3 leaks in macb_alloc() error paths:
- Tx buffer allocated but crossing a 4G boundary: Tx leaked.
- Rx buffer allocation fails: Tx leaked.
- Rx buffer allocated but crossing a 4G boundary: Tx & Rx leaked.
This is because our error handling calls macb_free(bp) which in turn
frees the buffers stored in bp->queues[0], but nothing has been stored
in there. Fix by storing allocated buffers into bp->queues[0] ASAP.
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: avoid modifying shared unconfirmed ct entry
In a case where skb with an unconfirmed ct entry gets cloned, we may
end up committing both but with different sets of extensions.
The series of events:
1. The first clone wants to commit and runs the helpers wiring up
the extension pointer into the expectation list.
2. Then it looses the confirmation keeping the entry unconfirmed.
3. Second clone now wants to commit labels and adds the new extension
for that breaking the pointer in the expectation list causing
UAF on the destruction p
net: openvswitch: conntrack: fix helper UAF due to extensions realloc
In the Linux kernel, the following vulnerability has been resolved:
net: openvswitch: conntrack: fix helper UAF due to extensions realloc
While calling the helpers, a raw pointer to the extensions area is
wired into expectations list:
-> nf_ct_helper()
-> helper->help()
-> nf_ct_expect_related_report()
-> nf_ct_expect_insert()
-> hlist_add_head_rcu(&exp->lnode, &master_help->expectations)
In case the connection is not confirmed yet, more extensions can be
added afterwards with *_ext_add() calls reallocating the extension
space and leaving the now invalid pointer in the expectations list
that is later accessed while rem
net: atl1c: fix soft lockup on out-of-range tpd_cons read
In the Linux kernel, the following vulnerability has been resolved:
net: atl1c: fix soft lockup on out-of-range tpd_cons read
The hardware can report an out-of-range tpd_cons (seen as 0xffff)
while the PCIe link/MAC is resetting. An out-of-range value can
never be reached and the loop below would spin forever. To avoid
a soft lockup treat it as "nothing new to clean" instead.
Reproduced on two machines, same NIC (Qualcomm Atheros AR8151 v2.0,
4-port), triggered by rebooting a Mikrotik CCR2004 PCIe card that
the ports are directly linked to:
- Ubuntu 26.04.1 LTS, kernel 7.0.0-31-generic. The link-flap
precursor, before the lockup was cap
net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read
In the Linux kernel, the following vulnerability has been resolved:
net: atl1e: fix soft lockup on out-of-range hw_next_to_clean read
Same issue as atl1c (see the first commit in this series, "net:
atl1c: fix soft lockup on out-of-range tpd_cons read"): the hardware
can report an out-of-range hw_next_to_clean (seen as 0xffff) while
the PCIe link/MAC is resetting. An out-of-range value can never be
reached and the loop below would spin forever. Treat it as "nothing
new to clean" instead.
net: bridge: mdb: restart port group walk after deletion
In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mdb: restart port group walk after deletion
br_mdb_flush_pgs() keeps a pointer-to-pointer cursor while walking
mp->ports. br_multicast_del_pg() can re-enter the same MDB entry through
br_multicast_sg_del_exclude_ports() and unlink other port groups. If the
cursor points into one of those groups, the next iteration dereferences a
stale cursor and can leave mp->ports pointing at freed memory.
A following RTM_GETMDB exposes the dangling pointer:
BUG: KASAN: slab-use-after-free in br_mdb_dump
Read of size 8
br_mdb_dump
rtnl_mdb_dump
rtnl_dumpit
net: ena: fix MMIO read buffer leak on probe failure
In the Linux kernel, the following vulnerability has been resolved:
net: ena: fix MMIO read buffer leak on probe failure
ena_device_init() initializes the MMIO read mechanism with
ena_com_mmio_reg_read_request_init(), which allocates a coherent DMA
buffer for MMIO read responses.
The normal removal path releases this buffer through
ena_com_mmio_reg_read_request_destroy(). However, if ena_probe() fails
after ena_device_init() succeeds, the error path destroys the admin
resources and eventually frees ena_dev without destroying the MMIO read
request, leaving the coherent DMA buffer allocated.
Call ena_com_mmio_reg_read_request_destroy() in t