staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie()
rtw_restruct_wmm_ie() scans in_ie for a WMM IE with:
while (i < in_len) {
...
if (i + 5 < in_len && in_ie[i] == 0xDD && ...) {
...
break;
}
i += (in_ie[i + 1] + 2); /* to the next IE element */
}
When the "i + 5 < in_len" match check fails simply because i is
within 5 bytes of the end of the buffer (i.e. no WMM IE was found
near the tail of in_ie), execution falls through to
"i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len
- 1 at that point, this is a 1-byte out-of-bounds read of
xhci: fix lost bounce buffers on TDs spanning several ring segments
In the Linux kernel, the following vulnerability has been resolved:
xhci: fix lost bounce buffers on TDs spanning several ring segments
When a TD reaches a link TRB with data that is not aligned to the
endpoint's wMaxPacketSize, xhci_align_td() stages the unalignable tail
through the bounce buffer of the ring segment holding that link TRB.
xhci_unmap_td_bounce_buffer() later unmaps it and, for IN transfers,
copies the data back into the URB's buffer.
The enqueue path records the segment that was bounced in td->bounce_seg,
under the assumption that a TD never spans more than two ring segments.
That assumption does not hold: a TD large enoug
tracing: Take trace_array reference when opening options file
In the Linux kernel, the following vulnerability has been resolved:
tracing: Take trace_array reference when opening options file
The options files do not take the trace_array reference for the options
they represent. This could cause a use-after-free kernel crash if one of
these files is opened by one task and another task removes the instance
that the option is for. Because it doesn't take a reference upon opening,
it will not stop the removal which will free the options descriptor that
is being used.
As the options are somewhat dynamic in their creation at boot up, each
file represents a flag in the trace_array. The trace_array has an a
scsi: target: iscsi: Reserve a terminator byte for the login payload
In the Linux kernel, the following vulnerability has been resolved:
scsi: target: iscsi: Reserve a terminator byte for the login payload
iscsi_target_check_login_request() rejects a login PDU whose
DataSegmentLength exceeds MAX_KEY_VALUE_PAIRS, but the test is '>' and
login->req_buf is allocated with exactly MAX_KEY_VALUE_PAIRS
bytes. Since iscsit_get_login_rx() receives payload_length + padding
bytes, where
padding = ((-payload_length) & 3);
any payload_length from 8189 to 8192 fills the whole 8192 byte
buffer. The write stays in bounds, but no byte is left for a NUL
terminator.
The buffer is subsequently consumed as a C string. In the
scsi: pm8001: Use rollback index when freeing MSI-X vectors
In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Use rollback index when freeing MSI-X vectors
pm8001_request_msix() unwinds previously registered handlers with
free_irq() when request_irq() fails. The rollback loop uses the failing
index i for every iteration instead of the already registered vector
index j.
That passes the wrong IRQ/dev_id pair to free_irq() and leaves the
earlier handlers installed. Use j for both pci_irq_vector() and the
matching irq_vector entry in the rollback loop.
futex: Prevent rcuwait use-after-free during requeue PI
In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent rcuwait use-after-free during requeue PI
On PREEMPT_RT, FUTEX_CMP_REQUEUE_PI can trigger a KASAN report
(slab-out-of-bounds) in futex_requeue_pi_complete() invocation of
rcuwait_wake_up().
The futex_q used by futex_wait_requeue_pi() is allocated on the waiter's
stack. An early wakeup can race with a PI requeue as follows:
waiter requeue task
------ ------------
futex_wait_requeue_pi()
futex_do_wait()
schedule()
futex_requeue
ftrace: Take trace_array reference before accessing its ftrace_ops
In the Linux kernel, the following vulnerability has been resolved:
ftrace: Take trace_array reference before accessing its ftrace_ops
The trace instance files set_ftrace_filter and set_ftrace_notrace was
updated to work with specific trace instances (trace_arrays). The issue is
that when these files are opened, there is a small race window where it
will use the ftrace_ops from the inode->private pointer to get a reference
to the trace_array and then take its reference. The problem is that the
ftrace_ops itself could be freed. If the rmdir on the instance happens at
the same time the set_ftrace_filter file is opened, the rmdir could have
al
HID: rmi: fix OOB access with undersized RMI reports
In the Linux kernel, the following vulnerability has been resolved:
HID: rmi: fix OOB access with undersized RMI reports
The hid-rmi driver sizes its writeReport/readReport buffer purely from
the report descriptor supplied by the device, with no minimum bound:
data->input_report_size = hid_report_len(input_report);
data->output_report_size = hid_report_len(output_report);
alloc_size = data->output_report_size + data->input_report_size;
data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL);
data->readReport = data->writeReport + data->output_report_size;
but then reads and writes fixed offsets into it. A device declar
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
In the Linux kernel, the following vulnerability has been resolved:
HID: wacom: validate report length in wacom_intuos_pro2_bt_irq
wacom_intuos_pro2_bt_irq() receives the wire report length in `len`
but never consults it before parsing. After the report-id gate it
unconditionally calls wacom_intuos_pro2_bt_pen() and then, selected by
features.type, a fixed chain of sub-parsers, none of which receive
`len`:
wacom_intuos_pro2_bt_pen(wacom);
if (type == INTUOSP2_BT || type == INTUOSP2S_BT) {
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
} else {
wacom_intuos_gen3_bt_pad(wac
In the Linux kernel, the following vulnerability has been resolved:
dm: fix race when loading and unloading a table
If the userspace calls two concurrent table load ioctls and one of them
succeeds and the other fails, there is a race condition because
dm_setup_md_queue walks &md->table_devices without any lock. If the walk
races with dm_table_destroy -> free_devices -> dm_put_table_device, there
is access to invalid memory.
Fix this race by extending the lock over the list walk.
In the Linux kernel, the following vulnerability has been resolved:
dm: fix resume-vs-remove race
If the user issues the resume ioctl and the remove ioctl at the same
time, it may be possible that the device is resumed after it is suspended
in __dm_destroy. The result is that the table is destroyed without
calling the postsuspend method.
Dm targets expect that they may be removed only after the postsuspend
method method was called. If we break this expectation, it can cause
misbehavior in various targets. For example - in the dm-integrity target,
the reboot notifier is not unregistered, leading to use-after-free.
Fix this bug by refusing
dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds
In the Linux kernel, the following vulnerability has been resolved:
dma-buf: dma-heap: don't publish fd before copy_to_user() succeeds
DMA_HEAP_IOCTL_ALLOC allocates a dma-buf and installs an fd into the
caller's fd table via dma_buf_fd() -> fd_install() before
dma_heap_ioctl() copies the result back to userspace. If the trailing
copy_to_user() fails, userspace never learns the fd number, but the
fd (and the underlying dma-buf reference) are already visible to
other threads in the same process and are leaked for the lifetime of
the process.
The obvious "close it on the failure path" fix is unsafe: once
fd_install() has run, another thread
dma-direct: return struct page from dma_direct_alloc_from_pool()
In the Linux kernel, the following vulnerability has been resolved:
dma-direct: return struct page from dma_direct_alloc_from_pool()
Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool
helper") changed dma_direct_alloc_from_pool() to return the CPU address
from dma_alloc_from_pool(). That fits dma_direct_alloc(), but
dma_direct_alloc_pages() also uses the helper and expects a struct page *.
Fix this by making dma_direct_alloc_from_pool() return the struct page *
again, and pass the CPU address back through an out-parameter for the
dma_direct_alloc() caller.
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Initialize IRQ data before requesting IRQs
dw_edma_irq_request() passes struct dw_edma_irq to request_irq() before
dw_edma_channel_setup() fills the back pointer. A shared interrupt can
therefore enter the handler with dw_irq->dw still NULL, leading to a
NULL pointer dereference.
Set the back pointer before installing each handler.
cpuidle: dt_idle_genpd: kfree() the original name allocation
In the Linux kernel, the following vulnerability has been resolved:
cpuidle: dt_idle_genpd: kfree() the original name allocation
dt_idle_pd_alloc() kasprintf()s the full node path, then points
pd->name at kbasename() of that string. dt_idle_pd_free() kfree()s
pd->name, which is no longer the start of the allocation.
Copy the basename instead.
ima: Check for ERR_PTR from dentry_path() in validate_hash_algo()
In the Linux kernel, the following vulnerability has been resolved:
ima: Check for ERR_PTR from dentry_path() in validate_hash_algo()
dentry_path() returns ERR_PTR(-ENAMETOOLONG) when the path exceeds the
buffer. validate_hash_algo() passes the result straight to
integrity_audit_msg() without checking. ERR_PTR is not NULL, so
integrity_audit_message() sees a valid pointer and calls strlen() on
it, which faults:
BUG: unable to handle page fault for address: ffffffffffffffdc
RIP: 0010:strlen+0x30/0xa0
Call Trace:
audit_log_untrustedstring+0x19/0x30
integrity_audit_message+0x366/0x4f0
ima_inode_setxattr+0x512/0x5f0
In the Linux kernel, the following vulnerability has been resolved:
kprobes: Protect kprobe_blacklist with RCU
__within_kprobe_blacklist() traverses kprobe_blacklist without holding
kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist()
removes blacklist entries and immediately frees them with kfree().
A concurrent call to within_kprobe_blacklist() can therefore dereference
freed memory.
Furthermore, within_kprobe_blacklist() can be called in atomic or
non-preemptible contexts where the sleeping kprobe_mutex cannot be taken.
Protect kprobe_blacklist with RCU. Use guard(rcu)() and
list_for_each_entry_rcu() for traversal, l
mm/huge_memory: transfer the pmd dirty bit to the folio on zap
In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: transfer the pmd dirty bit to the folio on zap
zap_huge_pmd_folio() propagates the pmd young bit to the folio for the
file case, but not the dirty bit. The pte path does propagate it, in
zap_present_folio_ptes() and so does the pmd split path, in
__split_huge_pmd_locked().
For most file mappings the omission is harmless, because writing to a
shared file mapping goes through page_mkwrite(), which dirties the folio.
tmpfs is different: it has no page_mkwrite(), and vma_wants_writenotify()
is false for it, so a *read* fault on a MAP_SHARED tmpfs mapping inst
perf/x86/intel: Fix kernel address leakages in LBR stack
In the Linux kernel, the following vulnerability has been resolved:
perf/x86/intel: Fix kernel address leakages in LBR stack
Before Arch LBR gained CPL filtering support, a user-only branch stack
could still contain kernel addresses. As a result, kernel branch records
may be exposed to user space even when PERF_SAMPLE_BRANCH_USER is
requested.
For example, on Intel Tiger Lake, the following command can still report
SYSRET/ERET entries with kernel-space from addresses:
$ ./perf record -e cycles:p -o - --branch-filter any,save_type,u -- \
./perf bench syscall basic --loop 1000 | \
./perf script -i - --fields brstack|tr ' ' '\n'| \
grep
In the Linux kernel, the following vulnerability has been resolved:
i2c: core: fix debugfs UAF on adapter removal
i2c_del_adapter() frees the adapter's debugfs directory before it
unregisters the adapter device, but the new_device sysfs attribute
stays writable until device_del(). A write racing with removal still
reaches i2c_device_probe(), which passes the freed adap->debugfs to
debugfs_create_dir() as the new client's parent:
BUG: KASAN: slab-use-after-free in lookup_noperm_common+0x407/0x430
Read of size 4 at addr ffff88803ef87810 by task syz.0.61/6090
lookup_noperm_common+0x407/0x430
simple_start_creating+0x9c/0x110
debug