ACPI: scan: fix bus ID cleanup on device_add() failures
In the Linux kernel, the following vulnerability has been resolved:
ACPI: scan: fix bus ID cleanup on device_add() failures
When device_add() fails after acpi_device_set_name() has allocated an
instance ID and a new acpi_device_bus_id has been linked into
acpi_bus_id_list, the rollback path only removes wakeup_list and
detaches the ACPI handle data.
That leaves the bus-ID bookkeeping behind and keeps the allocated
instance number consumed.
Move the bus-ID cleanup and wakeup-list removal into a single helper.
Use it from both the normal device teardown path and the device_add()
rollback path. The wakeup list node is initialized before reg
mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler
In the Linux kernel, the following vulnerability has been resolved:
mailbox: qcom-cpucp: fix PREEMPT_RT self-deadlock in IRQ handler
qcom_cpucp_mbox_irq_fn() calls mbox_chan_received_data() while holding
chan->lock. Under PREEMPT_RT, spin_lock_irqsave() is converted to an
rt_spinlock (rtmutex-based), which tracks ownership and can sleep.
The callback chain triggered by mbox_chan_received_data() eventually
reaches mailbox_clear_channel() -> mbox_send_message() -> add_to_rbuf(),
which attempts to re-acquire the same chan->lock. Since rtmutex detects
the re-entrant lock attempt by the same owner, the thread blocks waiting
for a lock it alread
mailbox: qcom-cpucp: handle NULL data in send_data callback
In the Linux kernel, the following vulnerability has been resolved:
mailbox: qcom-cpucp: handle NULL data in send_data callback
mailbox_clear_channel() calls mbox_send_message() with NULL data to
notify the remote side that the RX channel has been cleared.
qcom_cpucp_mbox_send_data() blindly dereferenced the data pointer,
causing a NULL pointer dereference kernel panic when invoked from
this path under PREEMPT_RT.
Add an explicit NULL check and return early without writing to the
TX register, which is the correct behaviour for a channel-clear
notification.
In the Linux kernel, the following vulnerability has been resolved:
mailbox: riscv-sbi-mpxy: validate RPMI notification lengths
The SBI return value controls how many bytes are copied from shared
memory into the RPMI notification buffer. It is not validated against
the negotiated shared-memory size before that copy. The event walker
also uses a reversed loop condition and can inspect a short event record.
Validate the complete notification length before copying it, iterate only
while a full event header remains, and stop when a declared event payload
extends beyond the copied notification data.
null_blk: use DEFINE_MUTEX for the file-scope mutex
In the Linux kernel, the following vulnerability has been resolved:
null_blk: use DEFINE_MUTEX for the file-scope mutex
In null_init(), mutex_init(&lock) currently happens after
configfs_register_subsystem(), which exposes the nullb subsystem to
userspace. A racing mkdir() into /sys/kernel/config/nullb/ can reach
null_find_dev_by_name() -> mutex_lock(&lock) before the mutex is
initialized, trigger warning:
[ 123.137788] DEBUG_LOCKS_WARN_ON(lock->magic != lock)
[ 123.137796] WARNING: kernel/locking/mutex.c:159 at mutex_lock+0x171/0x1c0, CPU#13: mkdir/1301
[ 123.140090] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4
......
[ 12
null_blk: register configfs subsystem after creating default devices
In the Linux kernel, the following vulnerability has been resolved:
null_blk: register configfs subsystem after creating default devices
In null_init(), configfs_register_subsystem() currently runs before
register_blkdev(), so when null_blk is built as a module, a racing mkdir()
+ poweron from userspace can reach null_add_dev() while null_major is still
0. __add_disk() then hits WARN_ON(disk->minors) (major=0 with minors!=0)
and fails:
[root@fedora ~]# [ 2366.521436] WARNING: block/genhd.c:476 at __add_disk+0x8a7/0xde0,
[ 2366.523552] Modules linked in: null_blk(+) nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib
[ 2366.529081] CPU: 26 UID:
In the Linux kernel, the following vulnerability has been resolved:
null_blk: free global tag_set on init error path
If shared_tags is enabled, null_setup_tagset() allocates the global tag_set
via null_init_global_tag_set(). If device creation later fails, err_dev
destroys the default devices and calls unregister_blkdev(), but never frees
the global tag_set. Since module init failed, null_exit() is never invoked,
so the global tag_set's tags and maps are permanently leaked.
Free the global tag_set in err_dev, matching null_exit() which does
if (tag_set.ops) blk_mq_free_tag_set(&tag_set).
In the Linux kernel, the following vulnerability has been resolved:
null_blk: free zones array on device power-off
null_init_zoned_dev() allocates dev->zones when a zoned device is powered
on, but null_del_dev() never frees it on power-off; dev->zones is only
freed later in null_free_dev(), when the configfs directory is removed. If
the device is powered off and then on again, null_init_zoned_dev()
allocates a new array and overwrites the dev->zones pointer, leaking the
previous allocation each power cycle.
Free dev->zones in null_del_dev() via null_free_zoned_dev() to solve it.
And calling null_free_zoned_dev() in null_free_dev() is no lo
null_blk: reject per-device queue resize for shared tag set
In the Linux kernel, the following vulnerability has been resolved:
null_blk: reject per-device queue resize for shared tag set
When shared_tags is enabled, null_setup_tagset() makes the device use the
global tag_set, whose driver_data stays NULL. null_map_queues() therefore
falls back to the module-wide g_submit_queues/g_poll_queues instead of any
per-device value.
Resizing submit_queues or poll_queues via configfs on such a device calls
blk_mq_update_nr_hw_queues() on the shared set, shrinking
set->nr_hw_queues. __blk_mq_realloc_hw_ctxs() only grows the
q->queue_hw_ctx[] allocation, so on shrink it merely exits and NULLs the
now-excess
null_blk: serialize configfs attribute stores with the lock
In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute stores with the lock
The NULLB_DEVICE_ATTR _store takes no lock: apply_fn attributes
(submit_queues, poll_queues) get dev->NAME written again after apply_fn
returns, outside its lock; APPLY=NULL attributes are entirely lockless.
configfs only serializes stores per-open-file, so concurrent stores on
separate fds race.
For apply_fn attributes, once one store's apply_fn has reconfigured the
hardware, a second (losing) store can still overwrite dev->NAME
afterwards. This leaves dev->submit_queues out of sync with the live
queue count, whi
null_blk: serialize configfs attribute updates with device setup
In the Linux kernel, the following vulnerability has been resolved:
null_blk: serialize configfs attribute updates with device setup
The attribute store methods generated with NULLB_DEVICE_ATTR() refuse to
change the configuration of a live device by testing
NULLB_DEV_FL_CONFIGURED, but that flag is only set by
nullb_device_power_store() after null_add_dev() has returned, and the
store methods take no lock at all. configfs only serializes writes to
the same open file (buffer->mutex), so a write to any attribute can run
concurrently with null_add_dev() and change the device configuration
while it is being used.
null_add_dev() reads the conf
blk-iolatency: clear delay state when freeing policy data
In the Linux kernel, the following vulnerability has been resolved:
blk-iolatency: clear delay state when freeing policy data
io.latency can throttle a group which has no latency target of its own.
When a sibling misses its target, check_scale_change() scales down its
peers, and a peer that reaches queue depth one gets blkcg_use_delay()
called on it on every further scale-down, even with min_lat_nsec == 0.
iolatency_pd_offline() resets the target through
iolatency_set_min_lat_nsec(), which clears the delay only on a nonzero
to zero transition, so it never clears such a peer. Freeing the policy
data then leaves blkg->use_delay set and blkc
blk-iocost: clear delay state when freeing policy data
In the Linux kernel, the following vulnerability has been resolved:
blk-iocost: clear delay state when freeing policy data
iocg_kick_delay() turns sufficiently large debt into an explicit
block-cgroup delay with blkcg_set_delay(), setting blkg->use_delay to
-1 and incrementing blkcg->congestion_count. Clearing it again depends
on iocg_kick_delay() running from the period timer, the waitq timer or
the issue path.
ioc_pd_free() removes the iocg from active_iocgs and cancels its waitq
timer, and no further bios can arrive, so once it has run nothing is
left which can reduce the debt and clear the delay. The blkcg stays
marked congested for
block: mtip32xx: synchronize ioctls with device removal
In the Linux kernel, the following vulnerability has been resolved:
block: mtip32xx: synchronize ioctls with device removal
The ioctl handlers only test REMOVE_PENDING before entering
mtip_hw_ioctl(). Removal can set that bit immediately afterwards and free
dd->port in mtip_hw_exit() while an ioctl still dereferences it. An already
open block device can reach the handlers while del_gendisk() is in
progress.
Serialize both native and compat ioctls with removal. Set REMOVE_PENDING
before taking the mutex so new callers fail after an in-flight ioctl has
drained, and hold the mutex until the port has been torn down.
hwmon: (coretemp) Fix core_data leak on CPUs without PTS
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Fix core_data leak on CPUs without PTS
pdata->core_data is allocated in init_temp_data() when the first core
temp_data of a package is created, but it is only released from
destroy_temp_data(), and only in the branch that handles the package
temp_data.
Package temp_data is created solely when the CPU supports
X86_FEATURE_PTS. On a CPU without it, coretemp_cpu_online() never calls
coretemp_add_core() with pkg_flag set, so pdata->pkg_data stays NULL.
coretemp_cpu_offline() then skips the removal of the package interface,
destroy_temp_data() is never called
In the Linux kernel, the following vulnerability has been resolved:
bpf: Check pointer type for all atomic RMW paths
Atomic RMW verification records an instruction pointer type only when the
current destination is PTR_TO_ARENA. A second path can therefore reach the
same instruction with an ordinary pointer without comparing it against the
saved arena type.
The post-verification fixup uses the saved type to rewrite the instruction
to BPF_PROBE_ATOMIC for every path. Record the actual destination type for
all atomic RMW paths so the existing mismatch check rejects incompatible
uses of one instruction.
ksmbd: Do not skip lock checks for single-byte ranges
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Do not skip lock checks for single-byte ranges
check_lock_range() uses inclusive ranges. Its callers pass the end
offset as start + length - 1, so start == end represents a valid
single-byte range rather than an empty range.
The start == end shortcut therefore skips mandatory byte-range lock
checks for one-byte reads, writes, copychunk operations and one-byte
truncate ranges. A conflicting lock covering that byte is not checked
and the operation is allowed to proceed.
Remove the shortcut. The truncate size == inode->i_size case is already
handled by only calling ch
ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix slab-out-of-bounds read in ksmbd_alloc_user()
ksmbd_alloc_user() copies resp->hash_sz bytes out of the mountd IPC
login response with
user->passkey_sz = resp->hash_sz;
user->passkey = kmalloc(resp->hash_sz, KSMBD_DEFAULT_GFP);
if (user->passkey)
memcpy(user->passkey, resp->hash, resp->hash_sz);
resp->hash_sz is a __u16 supplied by the response, but resp->hash[] is
only KSMBD_REQ_MAX_HASH_SZ bytes. A malformed or malicious login
response can set hash_sz well beyond that (up to 65535), so the memcpy()
reads past the end of the response object. ipc_validate
ksmbd: validate ipc response length before dereferencing its fields
In the Linux kernel, the following vulnerability has been resolved:
ksmbd: validate ipc response length before dereferencing its fields
ipc_validate_msg() computes the expected message size by reading length
fields out of the response buffer supplied by the userspace ksmbd daemon
(payload_sz, session_key_len, ngroups, ...). Those fields are read before
the buffer is verified to be large enough to contain the struct they belong
to, so a short response makes the read land past the end of the allocation.
handle_response() sizes entry->response purely from the netlink attribute
length (nla_len()) and only guards the leading handle read, so th