ipv4: udp: Create exceptions before socket matching
In the Linux kernel, the following vulnerability has been resolved:
ipv4: udp: Create exceptions before socket matching
Currently, when ICMP Fragmentation Needed and Redirect Message packets
are locally delivered and quote a UDP packet, a FIB nexthop exception
(FNHE) is only created if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the FNHE cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 6457378fe796 ("ipv4: use siphash instead of Jenkins in
fnhe_hashfun()") and commit 67d6d681e15b ("ipv4: make exception cache
less
ipv6: udp: Create exceptions before socket matching
In the Linux kernel, the following vulnerability has been resolved:
ipv6: udp: Create exceptions before socket matching
Currently, when ICMPv6 Packet Too Big and Redirect Message packets are
locally delivered and quote a UDP packet, an exception is only created
in the IPv6 exception cache if the kernel can match the UDP packet to an
existing socket.
This behavior allows off-path attackers to conduct a side-channel attack
on the exception cache in order to discover the ephemeral port used by a
connected UDP socket.
Commit 4785305c05b2 ("ipv6: use siphash in rt6_exception_hash()") and
commit a00df2caffed ("ipv6: make exception cache less pr
btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode()
In the Linux kernel, the following vulnerability has been resolved:
btrfs: scrub: fix local_root reference leak in scrub_print_warning_inode()
When paths_from_inode() fails, scrub_print_warning_inode() jumps to err
without dropping the reference taken by btrfs_get_fs_root(), leaking a
reference to the root every time path resolution fails while printing
scrub warnings. Every other error and success path of the function
drops the reference.
Drop the reference on the paths_from_inode() failure path too.
dm ioctl: don't let data_start run past the buffer
In the Linux kernel, the following vulnerability has been resolved:
dm ioctl: don't let data_start run past the buffer
struct dm_ioctl has seven bytes of trailing padding, so the smallest
buffer userspace is allowed to ask for, offsetof(struct dm_ioctl, data),
is seven bytes shorter than sizeof(struct dm_ioctl).
get_result_buffer() sets data_start to sizeof(struct dm_ioctl) without
looking at how big the buffer actually is. Ask for the minimum and
data_start ends up seven bytes past the end. Callers add it to
data_size, and ctl_ioctl() copies that much back to userspace:
BUG: KASAN: slab-out-of-bounds in _copy_to_user+0xad/0xd0
Read o
wifi: brcmfmac: fix P2P device removal race in brcmf_detach()
In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix P2P device removal race in brcmf_detach()
When the driver is removed while the user space process that created
the P2P device (e.g. wpa_supplicant) is still exiting, the P2P device
interface is removed twice and the kernel crashes.
The two paths are:
- wpa_supplicant, on exit, sends NL80211_CMD_DEL_INTERFACE for the P2P
device. nl80211_del_interface() holds RTNL and the wiphy mutex and
calls brcmf_p2p_del_vif(), which disables discovery and waits up to
1.5 s for BRCMF_E_IF_DEL. Then it calls brcmf_remove_interface(),
which unregisters the
workqueue: Fix NULL current_pwq deref in chained work check
In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix NULL current_pwq deref in chained work check
current_wq_worker() only tells us that %current is a kworker. It does
not guarantee that the worker is currently executing a work item, as
worker->current_pwq is populated only while process_one_work() is running
the work function.
is_chained_work() can be reached while queueing on a draining or
destroying workqueue. If a kworker outside work-item execution reaches
that path, current_wq_worker() returns a worker but worker->current_pwq is
NULL, and the chained-work test can fault before it emits the intended
warni
xen/netfront: don't leak the skb when xennet_fill_frags() fails
In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: don't leak the skb when xennet_fill_frags() fails
When a response chain has more slots than fit in the skb's frags,
xennet_fill_frags() returns an error and xennet_poll() jumps to its
error path. That path moves what's left on tmpq to errq to be freed,
but the skb being filled was already dequeued from tmpq, so it's never
freed. Each chain that overflows leaks the skb and the pages attached
to it as frags, and the backend decides how many slots it sends.
Put the skb back on tmpq before taking the error path, like the
xennet_set_skb_gso() failure just above
tipc: destroy topsrv workqueues before closing connections
In the Linux kernel, the following vulnerability has been resolved:
tipc: destroy topsrv workqueues before closing connections
tipc_topsrv_stop() closed subscriber connections while the topology
server's send and receive workqueues were still running. Socket
callbacks and subscription events could then queue more work, and
in-flight send/recv work could drop the last connection reference
during the conn_idr walk.
That race produced several teardown failures: refcount_t addition on
0 from conn_get() on a connection whose release was blocked on
idr_lock, a subsequent use-after-free in tipc_conn_close(),
queue_work() on an already destroyed w
selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts
In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve NATIVE_LABELS on already-initialized sb in set_mnt_opts
When an NFSv4 filesystem exported with security_label is mounted a
second time, sget_fc() returns the existing superblock and
nfs_get_root() calls security_sb_set_mnt_opts() again on it. Since the
superblock is already SB_INITIALIZED, selinux_set_mnt_opts() takes an
early exit without setting SECURITY_LSM_NATIVE_LABELS in
*set_kern_flags. nfs_get_root() then sees kflags without
SECURITY_LSM_NATIVE_LABELS set and clears NFS_CAP_SECURITY_LABEL on
the shared nfs_server, silently disabling per-file labeli
ibmveth: h_free logical LAN on open-fail after register
In the Linux kernel, the following vulnerability has been resolved:
ibmveth: h_free logical LAN on open-fail after register
ibmveth_open() registers the logical LAN, then allocates the RX
buffer pools. A pool failure jumps to out_free_buffer_pools without
h_free_logical_lan(), so PHYP still owns the buffer-list page when
it is unmapped. request_irq() failure already issued the hypercall
before taking the same label.
Move that h_free to the shared post-register unwind so both paths
deregister before the buffer list is unmapped.
In the Linux kernel, the following vulnerability has been resolved:
KEYS: Fix add_key() race with keyring restriction
__key_create_or_update() snapshots keyring->restrict_link before taking
the destination keyring's semaphore. keyring_restrict() installs a
restriction while holding that semaphore.
This allows a writer to observe no restriction, wait for the keyring
owner to install a reject-all restriction and return successfully, and
then link a key using the stale NULL snapshot. The writer only needs
write permission on the destination keyring.
Move the restrict_link read after __key_link_lock() and
__key_link_begin(). The read and t
memstick: core: wait for request completion before freeing card
In the Linux kernel, the following vulnerability has been resolved:
memstick: core: wait for request completion before freeing card
In memstick_alloc_card() and memstick_set_rw_addr(),
wait_for_completion_timeout() is used to wait for device identification
and address configuration requests to complete.
The memstick subsystem does not provide an abort or cancellation
callback in struct memstick_host for in-flight requests. If
wait_for_completion_timeout() expires (for instance, when a USB transfer
or command retry is delayed), memstick_alloc_card() returns an error and
frees the memstick_dev structure via kfree(card).
However, the host co
memstick: rtsx_usb_ms: complete requests after eject instead of dropping them
In the Linux kernel, the following vulnerability has been resolved:
memstick: rtsx_usb_ms: complete requests after eject instead of dropping them
memstick_check() can pass its host->removing check just before
rtsx_usb_ms_drv_remove() sets eject/removing. Its next request is then
silently dropped: rtsx_usb_ms_request() skips schedule_work() once eject
is set, and drv_remove's cancel_work_sync() can also cancel a queued
handle_req before it picks the request up. Nobody completes
card->mrq_complete.
Once memstick core waits for requests without a timeout ("memstick: core:
wait for request completion before freeing card"), this hangs removal:
dm-crypt: reject the lmk IV mode with AEAD ciphers
In the Linux kernel, the following vulnerability has been resolved:
dm-crypt: reject the lmk IV mode with AEAD ciphers
A "capi:" table line that pairs an AEAD cipher with the lmk IV mode,
for example "capi:gcm(aes)-lmk" with the integrity:28:aead option,
causes an oops when it is loaded. lmk sets tfms_count to 64, but
crypt_alloc_tfms_aead only allocates one transform, so crypt_setkey
reads past the end of the tfms_aead array and calls crypto_aead_setkey
on the values it finds there.
lmk exists for compatibility with Loop-AES, which uses CBC, so refuse
it with an AEAD cipher rather than allocate 64 AEAD transforms. The
check cannot go in c
In the Linux kernel, the following vulnerability has been resolved:
dm: fix reading free memory in do_resume
When do_resume calls dm_table_get_mode(new_map), the call is done without
holding any locks (it only holds a reference to the md). It may be
possible that another concurrent ioctl on the same device will swap table
after dm_swap_table and before dm_table_get_mode. In this case,
dm_table_get_mode(new_map) reads freed memory.
This race condition was triggered by syzbot.
This commit fixes the race by reading mode of the new table before
dm_swap_table. Note that new_map is also passed to dm_ima_need_measure,
but this function doesn't a
mmc: mtk-sd: Cancel request timeout work on remove
In the Linux kernel, the following vulnerability has been resolved:
mmc: mtk-sd: Cancel request timeout work on remove
The driver queues req_timeout while a request is active.
msdc_request_done() uses cancel_delayed_work(), which does not wait for
a timeout callback that has already started.
The timeout callback calls mmc_request_done(), which wakes the request
waiter, and then continues to use host->dev_comp and check the SDIO IRQ.
During unbind, msdc_drv_remove() can return and the managed mmc_host can
be freed before the callback finishes.
KASAN reported use-after-free accesses in msdc_request_done() and
msdc_recheck_sdio_irq() in each
In the Linux kernel, the following vulnerability has been resolved:
net: team: stop reusing skb after queue override
A nonzero dev_queue_xmit() result does not return ownership of the skb.
When an override port's qdisc drops it, the queue override helper used to
try another port or the mode transmit op with the freed skb.
Return the handoff decision separately from transmit success. Select only
the first override port under RCU and stop after handing it the skb,
regardless of the lower transmit result. Keep the existing success and
drop accounting.
BUG: KASAN: slab-use-after-free in sk_skb_reason_drop
Write of size 4 by task poc/5040
net: team: free skb when broadcast has no txable port
In the Linux kernel, the following vulnerability has been resolved:
net: team: free skb when broadcast has no txable port
bc_transmit() sends the original skb through the last txable port.
When no port is txable, it returns false without consuming the skb, but
team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the
skb and its socket write-memory charge.
A TX-enabled, link-down port keeps the broadcast transmit op installed.
Carrier can stay up through a second link-up, TX-disabled port or be
forced on by userspace. Free the original skb on the no-port path while
leaving the existing drop accounting intact.
Discovered by S
openvswitch: fix soft lockup in the netlink flow dump
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the
optee: register TEE devices only once fully initialized
In the Linux kernel, the following vulnerability has been resolved:
optee: register TEE devices only once fully initialized
optee_probe() called tee_device_register() on both the client and the
supplicant device before the rest of struct optee had been initialized.
tee_device_register() calls cdev_device_add(), which does two things at
once: it creates /dev/tee0 and /dev/teepriv0, and it links the device
into the tee class so that class_find_device() can find it. From that
moment on the device is reachable both from user space via tee_open()
and from kernel space via tee_client_open_context(). The only gate in
teedev_open() is tee_device_g