PatchFirst · Vulnérabilités récentes
Vulnérabilités publiées pour linux-lts-xenial au cours des 30 derniers jours : 322. Présentes dans le catalogue KEV : 0.
Vulnérabilités : 5695
In the Linux kernel, the following vulnerability has been resolved: can: ems_usb: validate CPC message lengths ems_usb_read_bulk_callback() walks CPC messages packed in one USB receive buffer. Check that each declared message fits in the URB payload. Also require the type-specific payload to cover the fields used by the CAN, state, error and overrun handlers.
In the Linux kernel, the following vulnerability has been resolved: can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents The wait and bulk receive paths walk variable-length commands from a USB buffer. A nonzero command shorter than CMD_HEADER_LEN can still be dispatched, and the wait path copies a matching command into a fixed caller-owned struct kvaser_cmd using the device-provided length. Reject nonzero commands that do not contain the fixed header or that extend beyond the current USB buffer item. In the wait path, also reject a matching command that exceeds the destination before copying it.
In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: add bounds check for USB channel index The channel control index ctrl_idx is derived from rx->len which comes directly from a device USB payload. The mask 0x0f allows values 0-15, but the array size of usb_if->dev[] is only 2. Values 2-15 cause heap out-of-bounds read, eventually causing kernel panic in the IRQ context. Add bounds checking for ctrl_idx before the array access in both pcan_usb_pro_handle_canmsg() and pcan_usb_pro_handle_error().
In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error In peak_usb_start(), each RX URB transfer buffer is allocated with kmalloc() and the URB is flagged URB_FREE_BUFFER so that the final usb_free_urb() also frees the transfer buffer. If usb_submit_urb() fails, the error path frees the buffer explicitly with kfree(buf) and then calls usb_free_urb(urb). Because URB_FREE_BUFFER is set, usb_free_urb() -> urb_destroy() frees the same buffer a second time, a double free of the transfer buffer. BUG: KASAN: double-free in usb_free_urb.part.0+0
In the Linux kernel, the following vulnerability has been resolved: can: peak_usb: validate uCAN receive record lengths pcan_usb_fd_decode_buf() walks uCAN records packed in one USB receive buffer. Require each record to contain the fixed header for its type, and verify CAN payload bytes before copying them into the skb.
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate DRAW_PRIMITIVES header size before division vmw_cmd_draw() computes maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl); where header->size is u32 and is taken straight from the user-supplied command stream. When header->size is less than sizeof(cmd->body) the unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum. Any user-controlled cmd->body.numVertexDecls then passes the bound and the loop dereferences decl[i] far past the end of the kernel command bounce buffer, producing an out-of-bounds read of kernel memory. Reject unde
In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: bound DMA command body size against suffix pointer vmw_cmd_dma() locates the DMA suffix at (unsigned long) &cmd->body + header->size - sizeof(*suffix) without checking that header->size is large enough to contain both cmd->body and the suffix. An undersized header makes the suffix pointer underflow back into the previous command in the bounce buffer. The verifier later writes suffix->maximumOffset, clobbering verified fields of an already-relocated earlier command -- a TOCTOU on the device-visible command stream that lets one command rewrite another's GMR i
In the Linux kernel, the following vulnerability has been resolved: fbcon: fix NULL pointer dereference for a console without vc_data fbcon_new_modelist() runs when a framebuffer's modelist changes. For each console mapped to it with fb_display[i].mode set, it reads vc_cons[i].d and passes the vc_num to fbcon_set_disp(). This assumes a console with a mode set has a vc_data, but it can be NULL. fbcon_set_disp() sets fb_display[i].mode before it checks vc_data, and fbcon_deinit() leaves the mode set after the vc_data is freed. fbcon_new_modelist() then dereferences the NULL vc_data. Keep fb_display[i].mode set only while the console has a vc
In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix integer overflow in radeon_align_pitch() radeon_align_pitch() has the same kind of overflow issue as the old amdgpu helper: both the alignment round-up add and the final 'aligned * cpp' calculation can overflow signed int. If that wraps, radeon_mode_dumb_create() can end up returning an invalid pitch or creating a zero-sized dumb buffer. Fix this by using check_add_overflow() for the alignment round-up and check_mul_overflow() for the final pitch calculation, returning 0 on overflow. Also reject zero pitch and size in radeon_mode_dumb_create(). Found via
In the Linux kernel, the following vulnerability has been resolved: drm/radeon: fix memory leak in radeon_ring_restore() on lock failure radeon_ring_restore() takes ownership of the data buffer allocated by radeon_ring_backup(). The caller (radeon_gpu_reset()) only frees it in the non-restore branch; in the restore branch it relies on radeon_ring_restore() to free it. If radeon_ring_lock() fails, the function returned early without calling kvfree(data), leaking the ring backup buffer on every GPU reset that fails at the lock stage. During repeated GPU resets this causes cumulative kernel memory exhaustion. Free data before returning the e
In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: fix OOB access from firmware tx status queue ID ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a 4-bit hardware field (0-15), but the txq array only has ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array access. Add a bounds check on ts.qid before using it as an array index.
In the Linux kernel, the following vulnerability has been resolved: ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD via addrconf_dad_end(), which drops ifp->lock on return. The lock is re-acquired after net_info_ratelimited(). A concurrent ipv6_del_addr() can take the lock in that window, set ifp->state to DEAD and run list_del_rcu(&ifp->if_list). addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad: and schedules a new dad_work. The work calls ipv6_del_addr() again, hitting the already-poisoned list entry: general protection fault:
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Fix UAF at handling events with embedded SysEx data The OSS sequencer processes the input MIDI bytes into a sequencer event to be dispatched later (in snd_seq_oss_midi_putc() called from snd_seq_oss_process_event()). When it's a SysEx data, the event record contains data.ext.ptr pointer to the original SysEx bytes, and the referred data is copied into the pool afterwards at dispatching. The problem is that, if the sequencer port gets closed concurrently before the dispatch, the OSS sequencer core also releases the resources (in snd_seq_oss_midi_check_exit_p
In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: midi: Serialize output teardown with event_input event_process_midi() borrows msynth->output_rfile.output and then passes the substream to dump_midi() and snd_rawmidi_kernel_write() without synchronizing with the output open/close transition. midisynth_use() also publishes output_rfile before snd_rawmidi_output_params() has finished. The last midisynth_unuse() can therefore release the same rawmidi file and free substream->runtime before snd_rawmidi_kernel_write1() takes its runtime buffer reference. That leaves the event_input path using a stale substream or ru
In the Linux kernel, the following vulnerability has been resolved: configfs_lookup(): don't leave ->s_dentry dangling on failure Normally ->s_dentry is cleared when dentry it's pointing to becomes negative (on eviction, realistically). However, that only happens if dentry gets to be positive in the first place; in case of inode allocation failure dentry never becomes positive, so ->d_iput() is not called at all. We do part of what normally would've been done by configfs_d_iput() (dropping the reference to configfs_dirent) manually, but we do not clear ->s_dentry there. Sloppy as it is, it does not matter in case of configfs_create_{dir,
In the Linux kernel, the following vulnerability has been resolved: ocfs2: rebase copied fsdlm LVB pointers in locking_state The locking_state debugfs iterator snapshots struct ocfs2_lock_res by value under ocfs2_dlm_tracking_lock and later formats that copy in ocfs2_dlm_seq_show(). That is fine for the inline fields, but the userspace fsdlm stack stores the LVB through lksb_fsdlm.sb_lvbptr. Once the iterator drops the tracking lock, a copied non-NULL sb_lvbptr still points into the original lockres owner, so teardown can free that container before the debugfs dump walks the raw LVB bytes. Rebase the copied sb_lvbptr to the copied l_lksb
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate fast symlink target during inode read ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that co
In the Linux kernel, the following vulnerability has been resolved: ocfs2: reject FITRIM ranges shorter than a cluster ocfs2_trim_mainbm() trims the global bitmap in cluster units, but its too-short range validation only checks sb->s_blocksize. On filesystems with a cluster size larger than the block size, a FITRIM range that is at least one block but shorter than one cluster is accepted and shifted down to len == 0. The later start + len - 1 and len -= ... arithmetic then underflows and can drive trimming past the requested range. Reject ranges shorter than s_clustersize instead. That preserves the existing -EINVAL behavior for reques
In the Linux kernel, the following vulnerability has been resolved: ocfs2/dlm: require a ref for locking_state debugfs open debug_lockres_open() copies inode->i_private into struct debug_lockres and debug_lockres_release() later drops that pointer with dlm_put(). That only works if open successfully pins the struct dlm_ctxt. Today open calls dlm_grab(dlm) but ignores its return value. Once the last domain unregister has removed the context from dlm_domains, dlm_grab() returns NULL, yet open still stores the raw pointer and returns success. The later release path is outside the debugfs removal barrier, so it can call dlm_put() after dlm_
In the Linux kernel, the following vulnerability has been resolved: netfilter: cttimeout: detach dataplane timeout policy and repurpose refcount Add a refcount for struct nf_ct_timeout which is used by ct extension to set the custom ct timeout policy, this tells us that the ct timeout is being used by a conntrack entry. When the last conntrack entry drops the refcount on the ct timeout, the ct timeout is released. Remove the refcount for control plane which controls if the ruleset refers to the timeout policy. After this update, it is possible to remove the ct timeout policy from nfnetlink_cttimeout immediately. This is for simplicity not
Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.