crypto: af-alg - fix NULL pointer dereference in scatterwalk
In the Linux kernel, the following vulnerability has been resolved:
crypto: af-alg - fix NULL pointer dereference in scatterwalk
The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL)
when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL
exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent
sendmsg() allocates a new SGL and chains it, but fails to clear the end
marker on the previous SGL's last data entry.
This causes the crypto scatterwalk to hit a premature end, returning NULL
on sg_next() and leading to a kernel panic during dereference.
Fix this by explicitly unmarking the end
mpls: add seqcount to protect the platform_label{,s} pair
In the Linux kernel, the following vulnerability has been resolved:
mpls: add seqcount to protect the platform_label{,s} pair
The RCU-protected codepaths (mpls_forward, mpls_dump_routes) can have
an inconsistent view of platform_labels vs platform_label in case of a
concurrent resize (resize_platform_label_table, under
platform_mutex). This can lead to OOB accesses.
This patch adds a seqcount, so that we get a consistent snapshot.
Note that mpls_label_ok is also susceptible to this, so the check
against RTA_DST in rtm_to_route_config, done outside platform_mutex,
is not sufficient. This value gets passed to mpls_label_ok once more
in both
net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak
In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: ndisc: fix ndisc_ra_useropt to initialize nduseropt_padX fields to zero to prevent an info-leak
When processing Router Advertisements with user options the kernel
builds an RTM_NEWNDUSEROPT netlink message. The nduseroptmsg struct
has three padding fields that are never zeroed and can leak kernel data
The fix is simple, just zeroes the padding fields.
ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()
In the Linux kernel, the following vulnerability has been resolved:
ipv6: icmp: clear skb2->cb[] in ip6_err_gen_icmpv6_unreach()
Sashiko AI-review observed:
In ip6_err_gen_icmpv6_unreach(), the skb is an outer IPv4 ICMP error packet
where its cb contains an IPv4 inet_skb_parm. When skb is cloned into skb2
and passed to icmp6_send(), it uses IP6CB(skb2).
IP6CB interprets the IPv4 inet_skb_parm as an inet6_skb_parm. The cipso
offset in inet_skb_parm.opt directly overlaps with dsthao in inet6_skb_parm
at offset 18.
If an attacker sends a forged ICMPv4 error with a CIPSO IP option, dsthao
would be a non-zero offset. Inside ic
In the Linux kernel, the following vulnerability has been resolved:
ip6_tunnel: clear skb2->cb[] in ip4ip6_err()
Oskar Kjos reported the following problem.
ip4ip6_err() calls icmp_send() on a cloned skb whose cb[] was written
by the IPv6 receive path as struct inet6_skb_parm. icmp_send() passes
IPCB(skb2) to __ip_options_echo(), which interprets that cb[] region
as struct inet_skb_parm (IPv4). The layouts differ: inet6_skb_parm.nhoff
at offset 14 overlaps inet_skb_parm.opt.rr, producing a non-zero rr
value. __ip_options_echo() then reads optlen from attacker-controlled
packet data at sptr[rr+1] and copies that many bytes into dopt->__data,
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
In the Linux kernel, the following vulnerability has been resolved:
crypto: authencesn - Do not place hiseq at end of dst for out-of-place decryption
When decrypting data that is not in-place (src != dst), there is
no need to save the high-order sequence bits in dst as it could
simply be re-copied from the source.
However, the data to be hashed need to be rearranged accordingly.
Thanks,
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_
netfilter: ctnetlink: ignore explicit helper on new expectations
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ctnetlink: ignore explicit helper on new expectations
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue.
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate LTK enc_size on load
Load Long Term Keys stores the user-provided enc_size and later uses
it to size fixed-size stack operations when replying to LE LTK
requests. An enc_size larger than the 16-byte key buffer can therefore
overflow the reply stack buffer.
Reject oversized enc_size values while validating the management LTK
record so invalid keys never reach the stored key state.
In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix potential double free of skb
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_bac
drm/ioc32: stop speculation on the drm_compat_ioctl path
In the Linux kernel, the following vulnerability has been resolved:
drm/ioc32: stop speculation on the drm_compat_ioctl path
The drm compat ioctl path takes a user controlled pointer, and then
dereferences it into a table of function pointers, the signature method
of spectre problems. Fix this up by calling array_index_nospec() on the
index to the function pointer list.
In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix u8 overflow in SSID scan buffer size calculation
The variable valuesize is declared as u8 but accumulates the total
length of all SSIDs to scan. Each SSID contributes up to 33 bytes
(IEEE80211_MAX_SSID_LEN + 1), and with WILC_MAX_NUM_PROBED_SSID (10)
SSIDs the total can reach 330, which wraps around to 74 when stored
in a u8.
This causes kmalloc to allocate only 75 bytes while the subsequent
memcpy writes up to 331 bytes into the buffer, resulting in a 256-byte
heap buffer overflow.
Widen valuesize from u8 to u32 to accommodate the full range.
ALSA: caiaq: fix stack out-of-bounds read in init_card
In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix stack out-of-bounds read in init_card
The loop creates a whitespace-stripped copy of the card shortname
where `len < sizeof(card->id)` is used for the bounds check. Since
sizeof(card->id) is 16 and the local id buffer is also 16 bytes,
writing 16 non-space characters fills the entire buffer,
overwriting the terminating nullbyte.
When this non-null-terminated string is later passed to
snd_card_set_id() -> copy_valid_id_string(), the function scans
forward with `while (*nid && ...)` and reads past the end of the
stack buffer, reading the contents of the stac
In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Check the error for index mapping
The ctxfi driver blindly assumed a proper value returned from
daio_device_index(), but it's not always true. Add a proper error
check to deal with the error from the function.
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing
usb: ulpi: fix double free in ulpi_register_interface() error path
In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: fix double free in ulpi_register_interface() error path
When device_register() fails, ulpi_register() calls put_device() on
ulpi->dev.
The device release callback ulpi_dev_release() drops the OF node
reference and frees ulpi, but the current error path in
ulpi_register_interface() then calls kfree(ulpi) again, causing a
double free.
Let put_device() handle the cleanup through ulpi_dev_release() and
avoid freeing ulpi again in ulpi_register_interface().
comedi: dt2815: add hardware detection to prevent crash
In the Linux kernel, the following vulnerability has been resolved:
comedi: dt2815: add hardware detection to prevent crash
The dt2815 driver crashes when attached to I/O ports without actual
hardware present. This occurs because syzkaller or users can attach
the driver to arbitrary I/O addresses via COMEDI_DEVCONFIG ioctl.
When no hardware exists at the specified port, inb() operations return
0xff (floating bus), but outb() operations can trigger page faults due
to undefined behavior, especially under race conditions:
BUG: unable to handle page fault for address: 000000007fffff90
#PF: supervisor write access in kernel mode
#PF: err
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
In the Linux kernel, the following vulnerability has been resolved:
comedi: ni_atmio16d: Fix invalid clean-up after failed attach
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure.
comedi: me_daq: Fix potential overrun of firmware buffer
In the Linux kernel, the following vulnerability has been resolved:
comedi: me_daq: Fix potential overrun of firmware buffer
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the