scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound i2c->length in I2C bsg handlers
struct qla_i2c_access carries a 16-bit length field alongside a fixed
64-byte buffer:
struct qla_i2c_access {
uint16_t device, offset, option, length;
uint8_t buffer[0x40];
} __packed;
qla2x00_write_i2c() and qla2x00_read_i2c() use the user-supplied
i2c->length without any bounds check. i2c is overlaid on a 256-byte
on-stack buffer and sfp is a 256-byte DMA-pool buffer, so a length up to
65535 overruns both:
- write: memcpy(sfp, i2c->buffer, i2c->length) over-reads the stack and
over-writes the sfp heap bu
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Hold vport reference in qla24xx_report_id_acquisition()
In the format 1 path, the virtual port is located on ha->vp_list while
holding vport_slock, but the lock is dropped before vp is used:
qla_update_host_map() is called and VP_IDX_ACQUIRED/REGISTER_FC4_NEEDED/
REGISTER_FDMI_NEEDED are set on vp. No reference is taken across that
window, so a concurrent qla24xx_deallocate_vp_id() can tear the vport
down and free it, leading to a use-after-free.
Take a vport reference (vref_count) under vport_slock when the matching
vp is found, and drop it after the last u
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound image count in qla2x00_update_fru_versions()
qla2x00_update_fru_versions() copies the user-supplied BSG request into
a fixed 256-byte stack buffer (bsg[DMA_POOL_SIZE]) and then iterates
list->count times over the qla_image_version array embedded in that
buffer, advancing the image pointer each iteration. count is taken
directly from user input with no upper bound, while only (DMA_POOL_SIZE
- sizeof(list->count)) / sizeof(struct qla_image_version) = 6 entries
actually fit. A larger count walks the image pointer off the end of the
stack buffer, reading ad
scsi: qla2xxx: Serialize flash version read in reset handler
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Serialize flash version read in reset handler
The "update cache versions without reset" sysfs reset operation (0x20261)
calls get_flash_version(), which reads hardware flash registers, without
holding ha->optrom_mutex. The VPD update path serializes the same call
under optrom_mutex, so this reset path can interleave its flash register
accesses with a concurrent VPD or optrom flash operation and corrupt the
reads.
Hold ha->optrom_mutex across the get_flash_version() call to match the
VPD update path.
scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero mailbox struct in qla2x00_get_firmware_state()
The mbx_cmd_t is allocated on the stack but left uninitialized.
qla2x00_mailbox_command() has several early-return paths (PCI permanent
failure, device failed, EEH busy, ISP abort pending, mailbox access
timeout, purge mbox) that return without writing the input mailbox
registers back into mcp->mb[]. qla2x00_get_firmware_state() then
unconditionally copies mcp->mb[1..6] (and mb[12]) into the caller's
states[] array regardless of the return value.
On such a failure the copied values are uninitialized kernel
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Bound rsp_info_len to avoid OOB sense-data read
In qla2x00_status_entry(), the FWI2 status path advances sense_data and
shrinks par_sense_len by rsp_info_len:
if (IS_FWI2_CAPABLE(ha)) {
sense_data += rsp_info_len;
par_sense_len -= rsp_info_len;
}
rsp_info_len is a 32-bit value taken directly from the target's FCP
response (sf.rsp_data_len), while par_sense_len is the IOCB data area
size (28 bytes for 24xx, 60 bytes for 29xx). A hostile or buggy target
reporting an rsp_info_len larger than par_sense_len makes the unsigned
subtraction underflow to a hug
scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Avoid req_q_map double-read in qla2x00_error_entry()
qla2x00_error_entry() reads ha->req_q_map[que] twice: once for the NULL
check and again when assigning it to req. The map slot is cleared by
qla25xx_free_req_que() (ha->req_q_map[que_id] = NULL under mq_lock)
during queue teardown, while the response-queue interrupt that drives
qla2x00_error_entry() is still registered (the IRQ is released later in
qla25xx_free_rsp_que()). If the slot is set to NULL between the two
reads, req becomes NULL and is dereferenced.
Read the slot once into req and NULL-check the
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Zero-init bsg stack buffers to avoid info leak
Several bsg handlers stage their request/reply in an uninitialized 256-byte
on-stack buffer (uint8_t bsg[DMA_POOL_SIZE]) and fill it via
sg_copy_to_buffer(), which only copies as many bytes as the user-supplied
request payload. When the request is shorter than the structure, the
remainder of the buffer is left holding stale stack data.
qla2x00_read_fru_status() and qla2x00_read_i2c() then copy the full
structure back to the reply payload with sg_copy_from_buffer(), leaking the
uninitialized stack bytes to user s
f2fs: limit recovery filename logging to stored length
In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN.
power: supply: ab8500_fg: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: ab8500_fg: fix use-after-free on remove
ab8500_fg_remove() destroys the driver workqueue while the threaded
interrupt handlers are still armed; they are devm-managed and freed
only after ->remove() returns, so a handler that fires in that
window queues work on the freed workqueue.
Tear the workqueue down through devm instead, registering its cleanup
after the power supply and before the interrupt requests. devm then
frees the interrupts first, so the handlers can no longer queue work,
before disabling the delayed and plain work items and destroying the
work
ext4: fix out-of-bounds read in ext4_read_inline_dir()
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out-of-bounds read in ext4_read_inline_dir()
ext4_read_inline_dir() can read a dirent header past the end of its inline
buffer, triggering a slab-out-of-bounds read during getdents64():
BUG: KASAN: slab-out-of-bounds in __ext4_check_dir_entry
Read of size 2 at addr ffff88800f3dd23c by task exploit/148
...
__ext4_check_dir_entry
ext4_read_inline_dir
iterate_dir
The dirent payload lives in a buffer of exactly inline_size bytes:
dir_buf = kmalloc(inline_size, GFP_NOFS);
but iteration runs in a position space extra_offset bytes larger
(extra_size
SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6
In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: check rpc_sockaddr2uaddr() return value in rpcb_register_inet4/6
rpcb_register_inet4() and rpcb_register_inet6() store the result of
rpc_sockaddr2uaddr() into map->r_addr without checking it for NULL.
rpc_sockaddr2uaddr() returns NULL when its final kstrdup() fails, and
the unchecked NULL is then carried into the synchronous RPCBPROC_SET
encode path: rpcb_register_call() -> rpc_call_sync() ->
rpcb_enc_getaddr() -> encode_rpcb_string(), whose first statement is
strlen(string), dereferencing NULL and oopsing the kernel.
The crash reproduces under failslab on v6.12; w
xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full
In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix out-of-bounds write in xfrm6_input_addr() when secpath is full
The depth check in xfrm6_input_addr() is off by one:
if (1 + sp->len == XFRM_MAX_DEPTH)
goto drop;
...
sp->xvec[sp->len++] = x;
xfrm_input() can leave sp->len == XFRM_MAX_DEPTH, and the transport-mode
receive path re-enters IPv6 input via xfrm_trans_reinject() with that
secpath preserved. If the inner packet carries a destination-options HAO
option or a type-2 routing header, xfrm6_input_addr() is called with
sp->len == XFRM_MAX_DEPTH; the check (1 + 6 == 6) is false, so
sp->xvec[sp-
isofs: fix out-of-bounds page array access on empty zisofs block
In the Linux kernel, the following vulnerability has been resolved:
isofs: fix out-of-bounds page array access on empty zisofs block
zisofs_uncompress_block()'s empty-block fast path returns
pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the
decompression path which returns bytes produced relative to poffset.
zisofs_fill_pages() uses that return to advance its page cursor, so when
the zisofs block size is below PAGE_SIZE and a sub-page block leaves
poffset partway into a page, a following empty block over-counts and
advances pages[] one element past its end, after which
"if (poffset && *pages)" reads pages[1] out of bounds. ro
timers/itimer: Zero-init old itimerval before copy to userspace
In the Linux kernel, the following vulnerability has been resolved:
timers/itimer: Zero-init old itimerval before copy to userspace
On native sparc64, struct __kernel_old_timeval contains a four-byte hole
after tv_usec because tv_sec is 64-bit while __kernel_suseconds_t is 32-bit.
put_itimerval() fills only the named fields in a stack-allocated
__kernel_old_itimerval and copies the entire object to userspace, so
getitimer() can expose the two padding holes.
Zero-initialize the aggregate before assigning the fields so implicit
padding is deterministic before it crosses the user/kernel boundary.
apparmor: fix cred UAF caused by begin_current_label_crit_section()
In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix cred UAF caused by begin_current_label_crit_section()
AppArmor's begin_current_label_crit_section() is a scary function called
from lots of LSM hooks (in particular VFS/socket-related ones) that checks
if the label referenced by the current creds is marked FLAG_STALE, and if
so, attempts to use aa_replace_current_label() to replace the creds with an
updated version that uses a new label.
The first problem with this is that it would directly lead to UAF of
`struct cred` if anything in the kernel takes a pointer to the current
creds and accesses these past a se
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
I am seeing some rcu_tasks stalls in the Meta fleet during reclaim.
INFO: rcu_tasks detected stalls on tasks:
0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8
task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552
Call Trace:
shrink_lruvec
mem_cgroup_iter
shrink_node
do_try_to_free_pages
try_to_free_pages
__alloc_frozen_pages_noprof
alloc_pages_noprof
pte_alloc_one
__pte_alloc
handle_mm_fault
Nothing promises direct reclaim returns in bounded ti
tracing: Fix crash passing ERR_PTR to kthread_stop()
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash passing ERR_PTR to kthread_stop()
event_test_stuff() calls kthread_run() and unconditionally passes the
returned task_struct pointer to kthread_stop(). kthread_run() returns an
error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for
example under memory pressure during the boot-time event self-test.
kthread_stop() then dereferences the invalid pointer, crashing the kernel.
Check the result of kthread_run() before passing it to kthread_stop(). Use
WARN_ON() so that a failure to create the self-test thread does not go
unnoticed, matching th
In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addi
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or wo