Vulnérabilités de linux-azure · Page n° 170

MIPS: vpe-mt: fix possible memory leak while module exiting

In the Linux kernel, the following vulnerability has been resolved: MIPS: vpe-mt: fix possible memory leak while module exiting Afer commit 1fa5ae857bb1 ("driver core: get rid of struct device's bus_id string array"), the name of device is allocated dynamically, it need be freed when module exiting, call put_device() to give up reference, so that it can be freed in kobject_cleanup() when the refcount hit to 0. The vpe_device is static, so remove kfree() from vpe_device_release().

• Mettez à jour vers 4.15.0-1162.177~16.04.1

clk: tegra: Fix refcount leak in tegra210_clock_init

In the Linux kernel, the following vulnerability has been resolved: clk: tegra: Fix refcount leak in tegra210_clock_init of_find_matching_node() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

• Mettez à jour vers 4.15.0-1162.177~16.04.1

btrfs: fix resolving backrefs for inline extent followed by prealloc

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix resolving backrefs for inline extent followed by prealloc If a file consists of an inline extent followed by a regular or prealloc extent, then a legitimate attempt to resolve a logical address in the non-inline region will result in add_all_parents reading the invalid offset field of the inline extent. If the inline extent item is placed in the leaf eb s.t. it is the first item, attempting to access the offset field will not only be meaningless, it will go past the end of the eb and cause this panic: [17.626048] BTRFS warning (device dm-2): bad eb member end:

gpiolib: cdev: fix NULL-pointer dereferences

In the Linux kernel, the following vulnerability has been resolved: gpiolib: cdev: fix NULL-pointer dereferences There are several places where we can crash the kernel by requesting lines, unbinding the GPIO device, then calling any of the system calls relevant to the GPIO character device's annonymous file descriptors: ioctl(), read(), poll(). While I observed it with the GPIO simulator, it will also happen for any of the GPIO devices that can be hot-unplugged - for instance any HID GPIO expander (e.g. CP2112). This affects both v1 and v2 uAPI. This fixes it partially by checking if gdev->chip is not NULL but it doesn't entirely remedy

clk: samsung: Fix memory leak in _samsung_clk_register_pll()

In the Linux kernel, the following vulnerability has been resolved: clk: samsung: Fix memory leak in _samsung_clk_register_pll() If clk_register() fails, @pll->rate_table may have allocated memory by kmemdup(), so it needs to be freed, otherwise will cause memory leak issue, this patch fixes it.

• Mettez à jour vers 4.15.0-1162.177~16.04.1

xfrm: Reinject transport-mode packets through workqueue

In the Linux kernel, the following vulnerability has been resolved: xfrm: Reinject transport-mode packets through workqueue The following warning is displayed when the tcp6-multi-diffip11 stress test case of the LTP test suite is tested: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ns-tcpserver:48198] CPU: 0 PID: 48198 Comm: ns-tcpserver Kdump: loaded Not tainted 6.0.0-rc6+ #39 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : des3_ede_encrypt+0x27c/0x460 [libdes] lr : 0x3f sp : ffff80000ceaa1b0 x29: ffff80000ceaa1b0 x28: ffff0000df056100 x27: ffff0000e

fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev

In the Linux kernel, the following vulnerability has been resolved: fs: jfs: Fix UBSAN: array-index-out-of-bounds in dbAllocDmapLev Syzkaller reported the following issue: UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dmap.c:1965:6 index -84 is out of range for type 's8[341]' (aka 'signed char[341]') CPU: 1 PID: 4995 Comm: syz-executor146 Not tainted 6.4.0-rc6-syzkaller-00037-gb6dad5178cea #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:217 [inline] __ubsa

lib: cpu_rmap: Avoid use after free on rmap->obj array entries

In the Linux kernel, the following vulnerability has been resolved: lib: cpu_rmap: Avoid use after free on rmap->obj array entries When calling irq_set_affinity_notifier() with NULL at the notify argument, it will cause freeing of the glue pointer in the corresponding array entry but will leave the pointer in the array. A subsequent call to free_irq_cpu_rmap() will try to free this entry again leading to possible use after free. Fix that by setting NULL to the array entry and checking that we have non-zero at the array entry when iterating over the array in free_irq_cpu_rmap(). The current code does not suffer from this since there are no

iommu: Fix error unwind in iommu_group_alloc()

In the Linux kernel, the following vulnerability has been resolved: iommu: Fix error unwind in iommu_group_alloc() If either iommu_group_grate_file() fails then the iommu_group is leaked. Destroy it on these error paths. Found by kselftest/iommu/iommufd_fail_nth

ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed

In the Linux kernel, the following vulnerability has been resolved: ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed Following process will trigger an infinite loop in ubi_wl_put_peb(): ubifs_bgt ubi_bgt ubifs_leb_unmap ubi_leb_unmap ubi_eba_unmap_leb ubi_wl_put_peb wear_leveling_worker e1 = rb_entry(rb_first(&ubi->used) e2 = get_peb_for_wl(ubi) ubi_io_read_vid_hdr // return err (flash fault) out_error: ubi->move_from = ubi->move_to = NULL wl_entry_destroy(ubi, e1) ubi->lookuptbl[e->pnum] = NULL retry: e = ubi->lookuptbl[pnum];

kobject: Add sanity check for kset->kobj.ktype in kset_register()

In the Linux kernel, the following vulnerability has been resolved: kobject: Add sanity check for kset->kobj.ktype in kset_register() When I register a kset in the following way: static struct kset my_kset; kobject_set_name(&my_kset.kobj, "my_kset"); ret = kset_register(&my_kset); A null pointer dereference exception is occurred: [ 4453.568337] Unable to handle kernel NULL pointer dereference at \ virtual address 0000000000000028 ... ... [ 4453.810361] Call trace: [ 4453.813062] kobject_get_ownership+0xc/0x34 [ 4453.817493] kobject_add_internal+0x98/0x274 [ 4453.822005] kset_register+0x5c/0xb4 [ 4453.825820] my_kobj_init+0x44

ipv6: Add lwtunnel encap size of all siblings in nexthop calculation

In the Linux kernel, the following vulnerability has been resolved: ipv6: Add lwtunnel encap size of all siblings in nexthop calculation In function rt6_nlmsg_size(), the length of nexthop is calculated by multipling the nexthop length of fib6_info and the number of siblings. However if the fib6_info has no lwtunnel but the siblings have lwtunnels, the nexthop length is less than it should be, and it will trigger a warning in inet6_rt_notify() as follows: WARNING: CPU: 0 PID: 6082 at net/ipv6/route.c:6180 inet6_rt_notify+0x120/0x130 ...... Call Trace: <TASK> fib6_add_rt2node+0x685/0xa30 fib6_add+0x96/0x1b0 ip6_route_add+0x50/0xd0 inet

pwm: lpc32xx: Remove handling of PWM channels

In the Linux kernel, the following vulnerability has been resolved: pwm: lpc32xx: Remove handling of PWM channels Because LPC32xx PWM controllers have only a single output which is registered as the only PWM device/channel per controller, it is known in advance that pwm->hwpwm value is always 0. On basis of this fact simplify the code by removing operations with pwm->hwpwm, there is no controls which require channel number as input. Even though I wasn't aware at the time when I forward ported that patch, this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL before devm_pwmchip_add() is called.

drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert. So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq should be executed under such condition, otherwise, an amdgpu_irq_put calltrace will occur. [ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246 [ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000 [ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d8

ubifs: Fix memory leak in alloc_wbufs()

In the Linux kernel, the following vulnerability has been resolved: ubifs: Fix memory leak in alloc_wbufs() kmemleak reported a sequence of memory leaks, and show them as following: unreferenced object 0xffff8881575f8400 (size 1024): comm "mount", pid 19625, jiffies 4297119604 (age 20.383s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff8176cecd>] __kmalloc+0x4d/0x150 [<ffffffffa0406b2b>] ubifs_mount+0x307b/0x7170 [ubifs] [<ffffffff819fa8fd>] legacy_get_tree+0xed/0x

media: cx23885: Fix a null-ptr-deref bug in buffer_prepare() and buffer_finish()

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: Fix a null-ptr-deref bug in buffer_prepare() and buffer_finish() When the driver calls cx23885_risc_buffer() to prepare the buffer, the function call dma_alloc_coherent may fail, resulting in a empty buffer risc->cpu. Later when we free the buffer or access the buffer, null ptr deref is triggered. This bug is similar to the following one: https://git.linuxtv.org/media_stage.git/commit/?id=2b064d91440b33fba5b452f2d1b31f13ae911d71. We believe the bug can be also dynamically triggered from user side. Similarly, we fix this by checking the return value of cx23

FS: JFS: Fix null-ptr-deref Read in txBegin

In the Linux kernel, the following vulnerability has been resolved: FS: JFS: Fix null-ptr-deref Read in txBegin Syzkaller reported an issue where txBegin may be called on a superblock in a read-only mounted filesystem which leads to NULL pointer deref. This could be solved by checking if the filesystem is read-only before calling txBegin, and returning with appropiate error code.

scsi: qla4xxx: Add length check when parsing nlattrs

In the Linux kernel, the following vulnerability has been resolved: scsi: qla4xxx: Add length check when parsing nlattrs There are three places that qla4xxx parses nlattrs: - qla4xxx_set_chap_entry() - qla4xxx_iface_set_param() - qla4xxx_sysfs_ddb_set_param() and each of them directly converts the nlattr to specific pointer of structure without length checking. This could be dangerous as those attributes are not validated and a malformed nlattr (e.g., length 0) could result in an OOB read that leaks heap dirty data. Add the nla_len check before accessing the nlattr data and return EINVAL if the length check fails.

HID: multitouch: Correct devm device reference for hidinput input_dev name

In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Correct devm device reference for hidinput input_dev name Reference the HID device rather than the input device for the devm allocation of the input_dev name. Referencing the input_dev would lead to a use-after-free when the input_dev was unregistered and subsequently fires a uevent that depends on the name. At the point of firing the uevent, the name would be freed by devres management. Use devm_kasprintf to simplify the logic for allocating memory and formatting the input_dev name string.

drm/radeon: free iio for atombios when driver shutdown

In the Linux kernel, the following vulnerability has been resolved: drm/radeon: free iio for atombios when driver shutdown Fix below kmemleak when unload radeon driver: unreferenced object 0xffff9f8608ede200 (size 512): comm "systemd-udevd", pid 326, jiffies 4294682822 (age 716.338s) hex dump (first 32 bytes): 00 00 00 00 c4 aa ec aa 14 ab 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<0000000062fadebe>] kmem_cache_alloc_trace+0x2f1/0x500 [<00000000b6883cea>] atom_parse+0x117/0x230 [radeon] [<00000000158c23fd>] radeon_atombios_init+0xab/0x170 [rad