bpf: Fix overflow of jump offset in constant blinding
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix overflow of jump offset in constant blinding
bpf_jit_blind_insn() rewrites 'if rX op imm goto off' into:
AX = imm ^ rnd
AX ^= rnd
if rX op AX goto off
and subtracts 2 from off when the jump is backward. off is s16, so
-32767 and -32768 wrap and the jump goes 32767 insns forward, past the
end of the prog. The jump is inside the patch, hence bpf_adj_branches()
doesn't check it. The kernel crashes when such prog runs with
bpf_jit_harden=2.
Return -ERANGE in such case. bpf_jit_blind_constants() fails the same
way when blinding of other insns moves a jump out o
In the Linux kernel, the following vulnerability has been resolved:
nvme: fix cdev lifetime
Sashiko bot reported a potential problem for the cdev lifetime in [0]
- the code there is heavily based on the NVMe code.
Currently the NS head .open and .release file_operations methods take and
put a reference to the nvme_ns_head to ensure that this structure does not
disappear while we open fds for that cdev.
In multipath mode, when we teardown the NS head, we call nvme_cdev_del() ->
cdev_device_del() -> cdev_del(). However after cdev_del() returns, cdevs
already open will remain and their fops will still be callable. As such,
we can still refer
wifi: mac80211: fix slab-out-of-bounds read in ieee80211_monitor_select_queue()
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix slab-out-of-bounds read in ieee80211_monitor_select_queue()
ieee80211_monitor_select_queue() validates the skb length using skb->len
before dereferencing pointers into skb->data to access the 802.11 header.
However, skb->len includes data in both the linear head buffer and
non-linear fragments/pages. When AF_PACKET sends a packet large enough to
become non-linear, the 802.11 header at skb->data + len_rthdr may extend
past the linear head buffer even though skb->len appears sufficient.
This leads to a slab-out-of-bounds read when accessing hdr->frame_con
net: systemport: Fix buffer overflow in bcm_sysport_get_stats()
In the Linux kernel, the following vulnerability has been resolved:
net: systemport: Fix buffer overflow in bcm_sysport_get_stats()
When running on SYSTEMPORT Lite, certain statistics are unsupported and
skipped during bcm_sysport_get_stats(). The variable 'j' tracks the
compacted index into the destination data buffer, whereas 'i' iterates
over all elements in bcm_sysport_gstrings_stats.
Because the buffer allocated by ethtool is sized only according to
bcm_sysport_get_sset_count(), storing values at data[i] instead of
data[j] writes past the allocated array bounds, leading to memory
corruption.
Fix this by writing to data[j] instead of
seg6: ensure packet data is writable before modifying SRH and IPv6 DA
In the Linux kernel, the following vulnerability has been resolved:
seg6: ensure packet data is writable before modifying SRH and IPv6 DA
advance_nextseg() modifies the SRH Segments Left field and the IPv6
destination address without ensuring the packet data is writable.
seg6_next_csid_advance_arg() has the same problem when it advances the
NEXT-C-SID argument in the destination address.
The skb may be cloned, for example by an AF_PACKET socket receiving on
the ingress device. advance_nextseg() and seg6_next_csid_advance_arg()
then write into the packet data shared with the clone. A read from that
socket can return the modified packet inst
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: allocate dummy netdev sooner
The RX rings and the shared NAPI are carried by an internal "dummy" netdev
(eth->dummy_dev). mtk_probe() creates that dummy device, and adds the
shared tx/rx NAPI to it, only after the MAC netdevs have been registered.
That order has been there since the MT7623 support was added and leaves a
window in which the netdevs are visible to the network core before the
shared NAPI and the dummy device exist.
If anything brings the first netdev up during that window (e.g. netifd
opening the WAN link the instant the interface
ipvs: filter some flags received in the backup server
In the Linux kernel, the following vulnerability has been resolved:
ipvs: filter some flags received in the backup server
While the IPVS SYNC protocol is not secure by design
we can still protect the backup server from messages that
can wreak havoc.
This commit addresses problems from received connection flags
or their combinations. We now drop messages as follows:
1. the NO_CPORT+TEMPLATE combination allows lookups for normal
connections to hit template which can break in many ways.
While the master does not sync connections with NO_CPORT flag,
i.e. before they are established, we still accept NO_CPORT
without TEMPLATE.
2. ONE_PACKET: i
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: fix firmware leak on teardown
The firmware requested in gfx_v6_0_init_microcode() is not released
when the GFX block is torn down, leaking the firmware resources.
Add gfx_v6_0_free_microcode() and call it from gfx_v6_0_sw_fini()
to release the PFP, ME, CE and RLC firmware.
(cherry picked from commit 386e81346f95ab0be5a82c5535de932e7a456924)
drm/amdgpu: fix ACP MFD device leak on init failure
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before
attaching them to the ACP power domain and initializing the hardware.
If attaching a child to the power domain fails, or if the ACP reset or
clock enable operation times out, the failure path frees only the
source cell, resource, and platform-data allocations. The child
platform devices already registered by mfd_add_devices() remain
registered and are never released.
Remove the children from the power domain and unregister the MFD
devices on failures
In the Linux kernel, the following vulnerability has been resolved:
USB: serial: fix port tear down use-after-free
Some drivers for multiport devices access port driver data from
completion handlers of shared URBs submitted at attach() or first open()
and stopped at disconnect() or last close(), respectively.
A simple NULL check before accessing the driver data makes sure that a
port state container has at least been allocated, but a completion
handler can still race with port tear down.
Reorder the disconnect handling so that ports are not deregistered (and
their driver data freed) until after all ports have been hung up and the
driver d
usb: storage: sierra_ms: reject short SWoC info transfers
In the Linux kernel, the following vulnerability has been resolved:
usb: storage: sierra_ms: reject short SWoC info transfers
sierra_get_swoc_info() requests sizeof(struct swoc_info) (60) bytes
from the device via usb_control_msg(), but its callers only treat a
negative return value as failure. A device that answers the
vendor-specific GetSwocInfo request with a short IN transfer is
therefore accepted, leaving the tail of the freshly allocated
(kmalloc(), non-zeroing) swoc_info buffer uninitialized.
truinst_show() subsequently prints swocInfo->rev, swocInfo->LinuxSKU
and swocInfo->LinuxVer from that buffer into the world-readable
(0444) "t
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd
generic_set_cmd() and generic_get_cmd() use the low nibble of
ctrl->bRequest as an index into con->data[]:
u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */
...
con->data[cmd] = value; /* OOB when cmd >= 5 */
struct usb_audio_control (include/linux/usb/audio.h) declares data as
a 5-element array, so indices 5 through 15 write (or read) up to 44
bytes past the end of the array on the heap.
A malicious USB host can craft a class-specific SET_CUR / GET_CUR
request with an arbi
USB: gadget: dummy-hcd: Fix wait for outstanding request completions
In the Linux kernel, the following vulnerability has been resolved:
USB: gadget: dummy-hcd: Fix wait for outstanding request completions
The dummy-hcd driver emulates synchronize_irq() by waiting until its
private callback_usage counter drops to 0 (with the private lock not
held). This counter is incremented whenever a gadget driver callback
occurs (which requires the private lock to be dropped), but not when a
request completion handler is called.
This is an oversight. Request completion is triggered by timer
interrupts (emulating device IRQs in a real UDC), and the interrupt
handlers are supposed to have completed when the synchronize_
usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC
When user space sets up FunctionFS with only full-speed descriptors
(e.g., flags = FUNCTIONFS_HAS_FS_DESC) and the gadget operates at a
higher speed (such as USB_SPEED_HIGH or USB_SPEED_SUPER),
config_ep_by_speed() detects that the function lacks descriptors for
the current speed, logs a warning, and falls back to full-speed
descriptors. The endpoint is then successfully enabled via
usb_ep_enable(), and epfile->ep becomes valid.
However, when user space subsequently issues the FUNCTIONFS_ENDPOINT_D
usb: core: clear both ep_in and ep_out for non-ep0 control endpoints
In the Linux kernel, the following vulnerability has been resolved:
usb: core: clear both ep_in and ep_out for non-ep0 control endpoints
In usb_enable_endpoint(), non-zero control endpoints (where
usb_endpoint_xfer_control(&ep->desc) is true) populate both
dev->ep_in[epnum] and dev->ep_out[epnum] with the same struct
usb_host_endpoint pointer.
However, usb_disable_endpoint() only clears either dev->ep_out[epnum] or
dev->ep_in[epnum] depending on the direction bit of epaddr when
reset_hardware is set, leaving the opposite direction's array slot
pointing to the disabled/freed endpoint.
Clear both dev->ep_out[epnum] and dev->ep_in[epnum] whe
USB: dwc2: shut down wakeup timer before freeing HCD state
In the Linux kernel, the following vulnerability has been resolved:
USB: dwc2: shut down wakeup timer before freeing HCD state
dwc2_wakeup_detected() accesses the DWC2 host state and can rearm the
wakeup timer. dwc2_hcd_free() currently deletes the timer only after
freeing host-owned state, and timer_delete() does not synchronize a
callback or prevent it from being queued again.
Stop and shut down the timer in dwc2_hcd_release(), before the HCD
resources are freed. This covers both the HCD initialization error path
and normal HCD removal.
usb: typec: tipd: fix uninitialized typec_partner_desc in tps6598x_connect()
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: tipd: fix uninitialized typec_partner_desc in tps6598x_connect()
tps6598x_connect() passes a stack-allocated typec_partner_desc to
typec_register_partner() after initializing only usb_pd, accessory and
identity.
typec_register_partner() copies attach and deattach from the descriptor
into the partner. With those fields left unset, garbage function pointers
may be stored and later invoked from typec_partner_link_device() when a USB
device is linked to the port. Uninitialized pd_revision and usb_capability
similarly leak stack data through partner sysfs.
Zero-ini
tty: vcc: zero-initialize control packet in vcc_send_ctl()
In the Linux kernel, the following vulnerability has been resolved:
tty: vcc: zero-initialize control packet in vcc_send_ctl()
The stack-allocated struct vio_vcc pkt was partially initialized,
leaving the tag.stype_env field uninitialized before being sent via
ldc_write(), potentially leaking kernel stack data to the LDC peer.
tty: vcc: hold port lock when clearing tty pointer in vcc_cleanup
In the Linux kernel, the following vulnerability has been resolved:
tty: vcc: hold port lock when clearing tty pointer in vcc_cleanup
vcc_cleanup() sets port->tty to NULL without holding port->lock, racing
with vcc_event() LDC callbacks that read port->tty under port->lock and
then use tty->port. This can cause a use-after-free when the callback
dereferences tty->port after cleanup has already destroyed and freed it.
tty: tty_port: restore TTY_IO_ERROR on activation failure
In the Linux kernel, the following vulnerability has been resolved:
tty: tty_port: restore TTY_IO_ERROR on activation failure
Make sure to restore the TTY_IO_ERROR flag if activation fails to
prevent I/O attempts on a port that is gone or powered down.
This specifically avoids issues like kernel panic due to unclocked
accesses or NULL-pointer dereferences when accessing powered down or
deregistered ports when a TTY ioctl races with hangup and open.
Note that the flag is set again in tty_port_close() but not restoring it
on activation failure leaves a window where drivers fail to handle the
ioctl-hangup race.