In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix use-after-free on probe deferral
The bridge counter was never reset when tearing down the DRM device so
that stale pointers to deallocated structures would be accessed on the
next tear down (e.g. after a second late bind deferral).
Given enough bridges and a few probe deferrals this could currently also
lead to data beyond the bridge array being corrupted.
Patchwork: https://patchwork.freedesktop.org/patch/502665/
drm/mipi-dsi: Detach devices when removing the host
In the Linux kernel, the following vulnerability has been resolved:
drm/mipi-dsi: Detach devices when removing the host
Whenever the MIPI-DSI host is unregistered, the code of
mipi_dsi_host_unregister() loops over every device currently found on that
bus and will unregister it.
However, it doesn't detach it from the bus first, which leads to all kind
of resource leaks if the host wants to perform some clean up whenever a
device is detached.
In the Linux kernel, the following vulnerability has been resolved:
ext2: Check block size validity during mount
Check that log of block size stored in the superblock has sensible
value. Otherwise the shift computing the block size can overflow leading
to undefined behavior.
spi: qup: Don't skip cleanup in remove's error path
In the Linux kernel, the following vulnerability has been resolved:
spi: qup: Don't skip cleanup in remove's error path
Returning early in a platform driver's remove callback is wrong. In this
case the dma resources are not released in the error path. this is never
retried later and so this is a permanent leak. To fix this, only skip
hardware disabling if waking the device fails.
ip_vti: fix potential slab-use-after-free in decode_session6
In the Linux kernel, the following vulnerability has been resolved:
ip_vti: fix potential slab-use-after-free in decode_session6
When ip_vti device is set to the qdisc of the sfb type, the cb field
of the sent skb may be modified during enqueuing. Then,
slab-use-after-free may occur when ip_vti device sends IPv6 packets.
As commit f855691975bb ("xfrm6: Fix the nexthdr offset in
_decode_session6.") showed, xfrm_decode_session was originally intended
only for the receive path. IP6CB(skb)->nhoff is not set during
transmission. Therefore, set the cb field in the skb to 0 before
sending packets.
In the Linux kernel, the following vulnerability has been resolved:
iavf: Fix use-after-free in free_netdev
We do netif_napi_add() for all allocated q_vectors[], but potentially
do netif_napi_del() for part of them, then kfree q_vectors and leave
invalid pointers at dev->napi_list.
Reproducer:
[root@host ~]# cat repro.sh
#!/bin/bash
pf_dbsf="0000:41:00.0"
vf0_dbsf="0000:41:02.0"
g_pids=()
function do_set_numvf()
{
echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs
sleep $((RANDOM%3+1))
}
function do_set_channel()
{
net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb
In the Linux kernel, the following vulnerability has been resolved:
net: usbnet: Fix WARNING in usbnet_start_xmit/usb_submit_urb
The syzbot fuzzer identified a problem in the usbnet driver:
usb 1-1: BOGUS urb xfer, pipe 3 != type 1
WARNING: CPU: 0 PID: 754 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Modules linked in:
CPU: 0 PID: 754 Comm: kworker/0:2 Not tainted 6.4.0-rc7-syzkaller-00014-g692b7dc87ca6 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023
Workqueue: mld mld_ifc_work
RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504
Code: 7c 24 18
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: unmap and remove csa_va properly
Root PD BO should be reserved before unmap and remove
a bo_va from VM otherwise lockdep will complain.
v2: check fpriv->csa_va is not NULL instead of amdgpu_mcbp (christian)
[14616.936827] WARNING: CPU: 6 PID: 1711 at drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c:1762 amdgpu_vm_bo_del+0x399/0x3f0 [amdgpu]
[14616.937096] Call Trace:
[14616.937097] <TASK>
[14616.937102] amdgpu_driver_postclose_kms+0x249/0x2f0 [amdgpu]
[14616.937187] drm_file_free+0x1d6/0x300 [drm]
[14616.937207] drm_close_helper.isra.0+0x62/0x70 [drm]
[14616.937220]
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: davinci: Fix clk use after free
The remove function first frees the clks and only then calls
cpufreq_unregister_driver(). If one of the cpufreq callbacks is called
just before cpufreq_unregister_driver() is run, the freed clks might be
used.
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
In the Linux kernel, the following vulnerability has been resolved:
ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy
For some reason, the driver adding support for Exynos5420 MIPI phy
back in 2016 wasn't used on Exynos5420, which caused a kernel panic.
Add the proper compatible for it.
mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write
In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write
When the oob buffer length is not in multiple of words, the oob write
function does out-of-bounds read on the oob source buffer at the last
iteration. Fix that by always checking length limit on the oob buffer
read and fill with 0xff when reaching the end of the buffer to the oob
registers.
wifi: cfg80211: reject auth/assoc to AP with our address
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject auth/assoc to AP with our address
If the AP uses our own address as its MLD address or BSSID, then
clearly something's wrong. Reject such connections so we don't
try and fail later.
In the Linux kernel, the following vulnerability has been resolved:
btrfs: insert tree mod log move in push_node_left
There is a fairly unlikely race condition in tree mod log rewind that
can result in a kernel panic which has the following trace:
[530.569] BTRFS critical (device sda3): unable to find logical 0 length 4096
[530.585] BTRFS critical (device sda3): unable to find logical 0 length 4096
[530.602] BUG: kernel NULL pointer dereference, address: 0000000000000002
[530.618] #PF: supervisor read access in kernel mode
[530.629] #PF: error_code(0x0000) - not-present page
[530.641] PGD 0 P4D 0
[530.647] Oops: 0000 [#1] SMP
In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: Add a check for oversized packets
Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet.
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: ti: Fix return type of netcp_ndo_start_xmit()
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed. A
proposed warning in clang aims to catch these at compile time, which
reveals:
drivers/net/ethernet/ti/netcp_core.c:1944:21: error: incompatible function pointer types
ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode
In the Linux kernel, the following vulnerability has been resolved:
ext4: add EXT4_IGET_BAD flag to prevent unexpected bad inode
There are many places that will get unhappy (and crash) when ext4_iget()
returns a bad inode. However, if iget the boot loader inode, allows a bad
inode to be returned, because the inode may not be initialized. This
mechanism can be used to bypass some checks and cause panic. To solve this
problem, we add a special iget flag EXT4_IGET_BAD. Only with this flag
we'd be returning bad inode from ext4_iget(), otherwise we always return
the error code if the inode is bad inode.(suggested by Jan Kara)
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix potential memory leaks
When the driver hits -ENOMEM at allocating a URB or a buffer, it
aborts and goes to the error path that releases the all previously
allocated resources. However, when -ENOMEM hits at the middle of the
sync EP URB allocation loop, the partially allocated URBs might be
left without released, because ep->nurbs is still zero at that point.
Fix it by setting ep->nurbs at first, so that the error handler loops
over the full URB list.
iommu/vt-d: Clean up si_domain in the init_dmars() error path
In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clean up si_domain in the init_dmars() error path
A splat from kmem_cache_destroy() was seen with a kernel prior to
commit ee2653bbe89d ("iommu/vt-d: Remove domain and devinfo mempool")
when there was a failure in init_dmars(), because the iommu_domain
cache still had objects. While the mempool code is now gone, there
still is a leak of the si_domain memory if init_dmars() fails. So
clean up si_domain in the init_dmars() error path.
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
In the Linux kernel, the following vulnerability has been resolved:
cxl: fix possible null-ptr-deref in cxl_guest_init_afu|adapter()
If device_register() fails in cxl_register_afu|adapter(), the device
is not added, device_unregister() can not be called in the error path,
otherwise it will cause a null-ptr-deref because of removing not added
device.
As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.