drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved
amdgpu_bo_create_reserved() only allocates a new BO when
*bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is
NULL, it simply skips creation when *bo_ptr is non-NULL.
But it unconditionally reserves, pins, gart allocates
and maps the BO afterwards.
When the same non-NULL BO pointer is passed in again,
for example firmware buffers that live in adev and are
re-loaded on every resume / cp_resume / start
under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases
pin_count unconditionally, however the matching t
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Shut down BO cache timer before teardown
The BO cache timer callback schedules time_work, and time_work can rearm
the timer through vc4_bo_cache_free_old().
vc4_bo_cache_destroy() deletes the timer and then cancels the work, which
does not break that cycle: the work being cancelled can rearm the timer,
and the timer then queues work again after teardown.
Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the
cycle ends with cancel_work_sync().
media: airspy: Return queued buffers on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: airspy: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
airspy_start_streaming() returned -ENODEV early when the USB device had
been disconnected (s->udev == NULL) without returning any buffers that
buf_queue() had already accepted. Take v4l2_lock first and jump to the
existing err_clea
In the Linux kernel, the following vulnerability has been resolved:
media: cx231xx: fix devres lifetime
USB drivers bind to USB interfaces and any device managed resources
should have their lifetime tied to the interface rather than parent USB
device. This avoids issues like memory leaks when drivers are unbound
without their devices being physically disconnected (e.g. on probe
deferral or configuration changes).
Fix the driver state lifetime so that it is released on driver unbind.
media: cx23885: add ioremap return check and cleanup
In the Linux kernel, the following vulnerability has been resolved:
media: cx23885: add ioremap return check and cleanup
Add a check for the return value of pci_ioremap_bar()
in cx23885_dev_setup().
If ioremap for BAR0 fails, release the already allocated
PCI memory region,
decrement the device count, and return -ENODEV.
This prevents a potential null pointer dereference and
ensures proper cleanup
on memory mapping failure.
media: meson: vdec: Fix memory leak in error path of vdec_open
In the Linux kernel, the following vulnerability has been resolved:
media: meson: vdec: Fix memory leak in error path of vdec_open
The vdec_open() function previously jumped directly to
err_m2m_release when vdec_init_ctrls() failed, skipping
release of the m2m context. This caused a resource leak.
Fix it by introducing a proper err_m2m_ctx_release label
that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before
releasing the m2m device.
This was identified via kmemleak:
unreferenced object 0xffff0000205d6878 (size 8):
comm "v4l_id", pid 5289, jiffies 4294938580
hex dump (first 8 bytes):
40 d2 49 18 00 00 ff ff
media: msi2500: Return queued buffers on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: msi2500: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
msi2500_start_streaming() had five error paths that all hit this trap
and were further tangled by ret-overwriting between calls:
- -ENODEV when the USB device was already disconnected
- -ERESTARTSYS when mutex_lock_interruptib
In the Linux kernel, the following vulnerability has been resolved:
media: pci: dm1105: Free allocated workqueue
Destroy allocated workqueue in remove() callback to free its resources,
thus fixing memory leak.
media: pwc: Drain fill_buf on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: pwc: Drain fill_buf on start_streaming() failure
pwc_isoc_init() submits its isochronous URBs with
usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is
submitted, its completion handler pwc_isoc_handler() can run on another
CPU before the loop finishes:
start_streaming()
pwc_isoc_init()
usb_submit_urb(urbs[0], GFP_KERNEL)
pwc_isoc_handler(urbs[0])
pdev->fill_buf =
pwc_get_next_fill_buf(pdev)
usb_submit_urb(urbs[i>0], ..) -> fails
media: pwc: Return queued buffers on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: pwc: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
pwc's start_streaming() had two early returns that hit this trap:
-ENODEV when the USB device was already disconnected, and -ERESTARTSYS
when mutex_lock_interruptible() was interrupted by a signal. Call the
existing pwc_cleanup_queued
media: radio-si476x: Unregister v4l2_device on probe failure
In the Linux kernel, the following vulnerability has been resolved:
media: radio-si476x: Unregister v4l2_device on probe failure
si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2
controls and before registering the video device. If any of those later
steps fails, probe returns through the exit label after freeing only the
control handler.
A failed probe does not call si476x_radio_remove(), so the
v4l2_device_unregister() there is not reached. This leaves the parent
device reference taken by v4l2_device_register() behind on the error path.
Unregister the V4L2 device in the probe error path after freeing the
controls.
media: rtl2832: fix use-after-free in rtl2832_remove()
In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832: fix use-after-free in rtl2832_remove()
cancel_delayed_work_sync() is called before i2c_mux_del_adapters()
in rtl2832_remove(). While the cancel waits for any running instance
of i2c_gate_work to finish, it does not prevent the timer from being
rescheduled by a concurrent thread.
During probe, the r820t_attach() call attempts I2C transfers through
the mux adapter. These transfers go through i2c_mux_master_xfer(),
which calls rtl2832_deselect() after the transfer completes,
rescheduling i2c_gate_work via schedule_delayed_work(). If this
transfer is still in f
media: rtl2832_sdr: Return queued buffers on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: rtl2832_sdr: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
rtl2832_sdr_start_streaming() had multiple error paths that hit this
trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six
`goto err` paths covering subdev s_power, tuner setup, ADC setup,
stream-buffer allocation, u
media: saa7134: Fix a possible memory leak in saa7134_video_init1
In the Linux kernel, the following vulnerability has been resolved:
media: saa7134: Fix a possible memory leak in saa7134_video_init1
In saa7134_video_init1(), the return value of the first
saa7134_pgtable_alloc() is not checked. If it fails, the function
continues as if successful, leaving the driver with an invalid page
table. Additionally, if vb2_queue_init() for the VBI queue fails after
the video queue page table has been allocated, the allocated memory is
not freed before returning. The second saa7134_pgtable_alloc() also
lacks a return value check. Errors occur during device probing before
the device is fully registered, the normal c
media: stm32: dcmi: unregister notifier on probe failure
In the Linux kernel, the following vulnerability has been resolved:
media: stm32: dcmi: unregister notifier on probe failure
dcmi_graph_init() registers the async notifier before dcmi_probe() toggles
the reset line. If reset_control_assert() or reset_control_deassert()
fails afterwards, probe returns through err_cleanup and the driver core
will not call dcmi_remove().
Unregister the notifier before cleaning it up on that error path,
matching the successful remove path and the V4L2 async notifier lifetime
rules.
[hverkuil: added Fixes tag]
media: sun4i-csi: Return queued buffers on start_streaming() failure
In the Linux kernel, the following vulnerability has been resolved:
media: sun4i-csi: Return queued buffers on start_streaming() failure
The vb2 framework hands buffers to the driver via buf_queue() before
calling start_streaming(). If start_streaming() returns an error
without first returning those buffers via vb2_buffer_done(),
vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued
buffers leak.
sun4i_csi_start_streaming() returned -EINVAL when no matching CSI
format could be found, before any setup (scratch buffer allocation,
pipeline start) had been performed. The remaining error paths already
converge on the err_clea
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-fwnode: Fix subdev owner overwritten in v4l2_async_register_subdev_sensor()
The v4l2 helper v4l2_async_register_subdev_sensor() calls
v4l2_async_register_subdev(), which is a macro that expands to
__v4l2_async_register_subdev(sd,THIS_MODULE). Since the macro is expanded
inside v4l2-fwnode.c, THIS_MODULE resolves to the v4l2-fwnode module
rather than the sensor driver module that originally set sd->owner. When
v4l2-fwnode is built-in, THIS_MODULE evaluates to NULL, which then
overwrites the sensor driver's owner with NULL.
This causes the problem that the sensor
media: vivid: check for vb2_is_busy() when toggling caps
In the Linux kernel, the following vulnerability has been resolved:
media: vivid: check for vb2_is_busy() when toggling caps
The vivid_update_format_cap/out() functions must only be called if the
capture/output queue are not busy. But for the controls that select
the CROP/COMPOSE/SCALE capability that is not checked.
Only when streaming starts will they be set to 'grabbed' and it is
impossible to change the control, but between REQBUFS and STREAMON you
are still allowed to set these controls. Since vivid_update_format_cap/out
will change the format, this can cause unexpected results.
Besides adding these checks, also add a WARN_ON in
vivi
In the Linux kernel, the following vulnerability has been resolved:
media: vivid: fix cleanup bugs in vivid_init()
When platform_device_register() fails in vivid_init(), the embedded
struct device in vivid_pdev has already been initialized by
device_initialize(), but the failure path jumps to free_output_strings
without dropping the device reference for the current platform device:
vivid_init()
-> platform_device_register(&vivid_pdev)
-> device_initialize(&vivid_pdev.dev)
-> setup_pdev_dma_masks(&vivid_pdev)
-> platform_device_add(&vivid_pdev)
This leads to a reference leak when platform_device_register() fails.
ALSA: seq: close a re-opened queue timer in the destructor
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: close a re-opened queue timer in the destructor
queue_delete() closes the queue timer, then frees it. snd_seq_timer_close()
clears q->timer->timeri. snd_use_lock_sync() then drains borrowers, and
snd_seq_timer_delete() frees q->timer.
A borrower can re-open the timer inside that window. A SET_QUEUE_CLIENT
that took a queueptr() use_lock reference before the queue was unlinked
runs snd_seq_timer_open() after the close. Open refuses re-open only while
timeri is set, and the close just cleared it, so it re-opens timeri.
snd_seq_timer_delete() does not close that i