p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-oracle-5.4 · Page n° 149

Vulnérabilités publiées pour linux-oracle-5.4 au cours des 30 derniers jours : 519. Présentes dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 7077

  1. CVE-2026-43080

    Moyenne · CVSS 5.5EPSS 0,12%Aucun correctif publié

    l2tp: Drop large packets with UDP encap

    In the Linux kernel, the following vulnerability has been resolved: l2tp: Drop large packets with UDP encap syzbot reported a WARN on my patch series [1]. The actual issue is an overflow of 16-bit UDP length field, and it exists in the upstream code. My series added a debug WARN with an overflow check that exposed the issue, that's why syzbot tripped on my patches, rather than on upstream code. syzbot's repro: r0 = socket$pppl2tp(0x18, 0x1, 0x1) r1 = socket$inet6_udp(0xa, 0x2, 0x0) connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c) connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4,

    Publication Mise à jour
  2. CVE-2026-43078

    Élevée · CVSS 7.8EPSS 0,13%Correctif disponible

    crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl

    In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl When page reassignment was added to af_alg_pull_tsgl the original loop wasn't updated so it may try to reassign one more page than necessary. Add the check to the reassignment so that this does not happen. Also update the comment which still refers to the obsolete offset argument.

    • Mettez à jour vers 5.4.0-1157.167~18.04.1
    Publication Mise à jour
  3. CVE-2026-43077

    Moyenne · CVSS 5.5EPSS 0,12%Correctif disponible

    crypto: algif_aead - Fix minimum RX size check for decryption

    In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Fix minimum RX size check for decryption The check for the minimum receive buffer size did not take the tag size into account during decryption. Fix this by adding the required extra length.

    • Mettez à jour vers 5.4.0-1157.167~18.04.1
    Publication Mise à jour
  4. CVE-2026-43076

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    ocfs2: validate inline data i_size during inode read

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading an inode from disk, ocfs2_validate_inode_block() performs various sanity checks but does not validate the size of inline data. If the filesystem is corrupted, an inode's i_size can exceed the actual inline data capacity (id_count). This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data buffer, triggering a use-after-free when accessing directory entries from freed memory. In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typicall

    Publication Mise à jour
  5. CVE-2026-43075

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    ocfs2: fix out-of-bounds write in ocfs2_write_end_inline

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN reports a use-after-free write of 4086 bytes in ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on a loop device. The actual bug is an out-of-bounds write past the inode block buffer, not a true use-after-free. The write overflows into an adjacent freed page, which KASAN reports as UAF. The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk id_count field to determine whether a write fits in inline da

    Publication Mise à jour
  6. CVE-2026-43073

    Moyenne · CVSS 5.5EPSS 0,16%Aucun correctif publié

    x86-64: rename misleadingly named '__copy_user_nocache()' function

    In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quad

    Publication Mise à jour
  7. CVE-2026-43071

    Critique · CVSS 9.1EPSS 0,46%Correctif disponible

    dcache: Limit the minimal number of bucket to two

    In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_

    • Mettez à jour vers 5.4.0-1161.171~18.04.1
    Publication Mise à jour
  8. CVE-2026-43069

    Moyenne · CVSS 5.5EPSS 0,11%Aucun correctif publié

    Bluetooth: hci_ll: Fix firmware leak on error path

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid.

    Publication Mise à jour
  9. CVE-2026-43068

    Moyenne · CVSS 5.5EPSS 0,12%Aucun correctif publié

    ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal()

    In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 w

    Publication Mise à jour
  10. CVE-2026-43061

    Moyenne · CVSS 5.5EPSS 0,09%Aucun correctif publié

    serial: 8250: Fix TX deadlock when using DMA

    In the Linux kernel, the following vulnerability has been resolved: serial: 8250: Fix TX deadlock when using DMA `dmaengine_terminate_async` does not guarantee that the `__dma_tx_complete` callback will run. The callback is currently the only place where `dma->tx_running` gets cleared. If the transaction is canceled and the callback never runs, then `dma->tx_running` will never get cleared and we will never schedule new TX DMA transactions again. This change makes it so we clear `dma->tx_running` after we terminate the DMA transaction. This is "safe" because `serial8250_tx_dma_flush` is holding the UART port lock. The first thing the callb

    Publication Mise à jour
  11. CVE-2026-43060

    Élevée · CVSS 7.8EPSS 0,12%Aucun correctif publié

    netfilter: nft_ct: drop pending enqueued packets on removal

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: drop pending enqueued packets on removal Packets sitting in nfqueue might hold a reference to: - templates that specify the conntrack zone, because a percpu area is used and module removal is possible. - conntrack timeout policies and helper, where object removal leave a stale reference. Since these objects can just go away, drop enqueued packets to avoid stale reference to them. If there is a need for finer grain removal, this logic can be revisited to make selective packet drop upon dependencies.

    Publication Mise à jour
  12. CVE-2026-43053

    Moyenne · CVSS 4.7EPSS 0,12%Aucun correctif publié

    xfs: close crash window in attr dabtree inactivation

    In the Linux kernel, the following vulnerability has been resolved: xfs: close crash window in attr dabtree inactivation When inactivating an inode with node-format extended attributes, xfs_attr3_node_inactive() invalidates all child leaf/node blocks via xfs_trans_binval(), but intentionally does not remove the corresponding entries from their parent node blocks. The implicit assumption is that xfs_attr_inactive() will truncate the entire attr fork to zero extents afterwards, so log recovery will never reach the root node and follow those stale pointers. However, if a log shutdown occurs after the leaf/node block cancellations commit but

    Publication Mise à jour
  13. CVE-2026-43052

    Élevée · CVSS 7.1EPSS 0,12%Aucun correctif publié

    wifi: mac80211: check tdls flag in ieee80211_tdls_oper

    In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: check tdls flag in ieee80211_tdls_oper When NL80211_TDLS_ENABLE_LINK is called, the code only checks if the station exists but not whether it is actually a TDLS station. This allows the operation to proceed for non-TDLS stations, causing unintended side effects like modifying channel context and HT protection before failing. Add a check for sta->sta.tdls early in the ENABLE_LINK case, before any side effects occur, to ensure the operation is only allowed for actual TDLS peers.

    Publication Mise à jour
  14. CVE-2026-43051

    Élevée · CVSS 8.1EPSS 0,26%Aucun correctif publié

    HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq

    In the Linux kernel, the following vulnerability has been resolved: HID: wacom: fix out-of-bounds read in wacom_intuos_bt_irq The wacom_intuos_bt_irq() function processes Bluetooth HID reports without sufficient bounds checking. A maliciously crafted short report can trigger an out-of-bounds read when copying data into the wacom structure. Specifically, report 0x03 requires at least 22 bytes to safely read the processed data and battery status, while report 0x04 (which falls through to 0x03) requires 32 bytes. Add explicit length checks for these report IDs and log a warning if a short report is received.

    Publication Mise à jour
  15. CVE-2026-43050

    Élevée · CVSS 7EPSS 0,12%Aucun correctif publié

    atm: lec: fix use-after-free in sock_def_readable()

    In the Linux kernel, the following vulnerability has been resolved: atm: lec: fix use-after-free in sock_def_readable() A race condition exists between lec_atm_close() setting priv->lecd to NULL and concurrent access to priv->lecd in send_to_lecd(), lec_handle_bridge(), and lec_atm_send(). When the socket is freed via RCU while another thread is still using it, a use-after-free occurs in sock_def_readable() when accessing the socket's wait queue. The root cause is that lec_atm_close() clears priv->lecd without any synchronization, while callers dereference priv->lecd without any protection against concurrent teardown. Fix this by converti

    Publication Mise à jour
  16. CVE-2026-43049

    Élevée · CVSS 7.8EPSS 0,15%Aucun correctif publié

    HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure

    In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Prevent use-after-free on force feedback initialisation failure Presently, if the force feedback initialisation fails when probing the Logitech G920 Driving Force Racing Wheel for Xbox One, an error number will be returned and propagated before the userspace infrastructure (sysfs and /dev/input) has been torn down. If userspace ignores the errors and continues to use its references to these dangling entities, a UAF will promptly follow. We have 2 options; continue to return the error, but ensure that all of the infrastructure is torn down accordingly

    Publication Mise à jour
  17. CVE-2026-43048

    Élevée · CVSS 8.8EPSS 0,32%Aucun correctif publié

    HID: core: Mitigate potential OOB by removing bogus memset()

    In the Linux kernel, the following vulnerability has been resolved: HID: core: Mitigate potential OOB by removing bogus memset() The memset() in hid_report_raw_event() has the good intention of clearing out bogus data by zeroing the area from the end of the incoming data string to the assumed end of the buffer. However, as we have previously seen, doing so can easily result in OOB reads and writes in the subsequent thread of execution. The current suggestion from one of the HID maintainers is to remove the memset() and simply return if the incoming event buffer size is not large enough to fill the associated report. Suggested-by Benjamin

    Publication Mise à jour
  18. CVE-2026-43047

    Élevée · CVSS 7.8EPSS 0,12%Aucun correctif publié

    HID: multitouch: Check to ensure report responses match the request

    In the Linux kernel, the following vulnerability has been resolved: HID: multitouch: Check to ensure report responses match the request It is possible for a malicious (or clumsy) device to respond to a specific report's feature request using a completely different report ID. This can cause confusion in the HID core resulting in nasty side-effects such as OOB writes. Add a check to ensure that the report ID in the response, matches the one that was requested. If it doesn't, omit reporting the raw event and return early.

    Publication Mise à jour
  19. CVE-2026-43046

    Moyenne · CVSS 5.5EPSS 0,11%Aucun correctif publié

    btrfs: reject root items with drop_progress and zero drop_level

    In the Linux kernel, the following vulnerability has been resolved: btrfs: reject root items with drop_progress and zero drop_level [BUG] When recovering relocation at mount time, merge_reloc_root() and btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against an impossible state: a non-zero drop_progress combined with a zero drop_level in a root_item, which can be triggered: ------------[ cut here ]------------ kernel BUG at fs/btrfs/relocation.c:1545! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU

    Publication Mise à jour
  20. CVE-2026-43043

    Moyenne · CVSS 5.5EPSS 0,11%Aucun correctif publié

    crypto: af-alg - fix NULL pointer dereference in scatterwalk

    In the Linux kernel, the following vulnerability has been resolved: crypto: af-alg - fix NULL pointer dereference in scatterwalk The AF_ALG interface fails to unmark the end of a Scatter/Gather List (SGL) when chaining a new af_alg_tsgl structure. If a sendmsg() fills an SGL exactly to MAX_SGL_ENTS, the last entry is marked as the end. A subsequent sendmsg() allocates a new SGL and chains it, but fails to clear the end marker on the previous SGL's last data entry. This causes the crypto scatterwalk to hit a premature end, returning NULL on sg_next() and leading to a kernel panic during dereference. Fix this by explicitly unmarking the end

    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →