p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-oracle-5.4 · Page n° 195

Vulnérabilités publiées pour linux-oracle-5.4 au cours des 30 derniers jours : 382. Présentes dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 7023

  1. CVE-2025-39994

    Élevée · CVSS 7.3EPSS 0,16%Aucun correctif publié

    media: tuner: xc5000: Fix use-after-free in xc5000_release

    In the Linux kernel, the following vulnerability has been resolved: media: tuner: xc5000: Fix use-after-free in xc5000_release The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv. A typical race condition is illustrated below: CPU 0 (release thread) | CPU 1 (delayed work callback) xc5000_release() | xc5000_do_timer_s

    Publication Mise à jour
  2. CVE-2025-39993

    Élevée · CVSS 7.8EPSS 0,16%Correctif disponible

    media: rc: fix races with imon_disconnect()

    In the Linux kernel, the following vulnerability has been resolved: media: rc: fix races with imon_disconnect() Syzbot reports a KASAN issue as below: BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline] BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627 Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465 CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_a

    • Mettez à jour vers 5.4.0-1151.161~18.04.1
    Publication Mise à jour
  3. CVE-2025-39987

    Élevée · CVSS 7.8EPSS 0,18%Aucun correctif publié

    can: hi311x: populate ndo_change_mtu() to prevent buffer overflow

    In the Linux kernel, the following vulnerability has been resolved: can: hi311x: populate ndo_change_mtu() to prevent buffer overflow Sending an PF_PACKET allows to bypass the CAN framework logic and to directly reach the xmit() function of a CAN driver. The only check which is performed by the PF_PACKET framework is to make sure that skb->len fits the interface's MTU. Unfortunately, because the sun4i_can driver does not populate its net_device_ops->ndo_change_mtu(), it is possible for an attacker to configure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999 After doing so, the attacker could open a PF_PACKET socket us

    Publication Mise à jour
  4. CVE-2025-39986

    Élevée · CVSS 7.8EPSS 0,18%Aucun correctif publié

    can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow

    In the Linux kernel, the following vulnerability has been resolved: can: sun4i_can: populate ndo_change_mtu() to prevent buffer overflow Sending an PF_PACKET allows to bypass the CAN framework logic and to directly reach the xmit() function of a CAN driver. The only check which is performed by the PF_PACKET framework is to make sure that skb->len fits the interface's MTU. Unfortunately, because the sun4i_can driver does not populate its net_device_ops->ndo_change_mtu(), it is possible for an attacker to configure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999 After doing so, the attacker could open a PF_PACKET socket

    Publication Mise à jour
  5. CVE-2025-39985

    Élevée · CVSS 7.8EPSS 0,18%Aucun correctif publié

    can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow

    In the Linux kernel, the following vulnerability has been resolved: can: mcba_usb: populate ndo_change_mtu() to prevent buffer overflow Sending an PF_PACKET allows to bypass the CAN framework logic and to directly reach the xmit() function of a CAN driver. The only check which is performed by the PF_PACKET framework is to make sure that skb->len fits the interface's MTU. Unfortunately, because the mcba_usb driver does not populate its net_device_ops->ndo_change_mtu(), it is possible for an attacker to configure an invalid MTU by doing, for example: $ ip link set can0 mtu 9999 After doing so, the attacker could open a PF_PACKET socket u

    Publication Mise à jour
  6. CVE-2025-39973

    Élevée · CVSS 8.8EPSS 0,16%Aucun correctif publié

    i40e: add validation for ring_len param

    In the Linux kernel, the following vulnerability has been resolved: i40e: add validation for ring_len param The `ring_len` parameter provided by the virtual function (VF) is assigned directly to the hardware memory context (HMC) without any validation. To address this, introduce an upper boundary check for both Tx and Rx queue lengths. The maximum number of descriptors supported by the hardware is 8k-32. Additionally, enforce alignment constraints: Tx rings must be a multiple of 8, and Rx rings must be a multiple of 32.

    Publication Mise à jour
  7. CVE-2025-39972

    Élevée · CVSS 8.8EPSS 0,16%Aucun correctif publié

    i40e: fix idx validation in i40e_validate_queue_map

    In the Linux kernel, the following vulnerability has been resolved: i40e: fix idx validation in i40e_validate_queue_map Ensure idx is within range of active/initialized TCs when iterating over vf->ch[idx] in i40e_validate_queue_map().

    Publication Mise à jour
  8. CVE-2025-39969

    Élevée · CVSS 8.8EPSS 0,16%Aucun correctif publié

    i40e: fix validation of VF state in get resources

    In the Linux kernel, the following vulnerability has been resolved: i40e: fix validation of VF state in get resources VF state I40E_VF_STATE_ACTIVE is not the only state in which VF is actually active so it should not be used to determine if a VF is allowed to obtain resources. Use I40E_VF_STATE_RESOURCES_LOADED that is set only in i40e_vc_get_vf_resources_msg() and cleared during reset.

    Publication Mise à jour
  9. CVE-2025-39967

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    fbcon: fix integer overflow in fbcon_do_set_font

    In the Linux kernel, the following vulnerability has been resolved: fbcon: fix integer overflow in fbcon_do_set_font Fix integer overflow vulnerabilities in fbcon_do_set_font() where font size calculations could overflow when handling user-controlled font parameters. The vulnerabilities occur when: 1. CALC_FONTSZ(h, pitch, charcount) performs h * pith * charcount multiplication with user-controlled values that can overflow. 2. FONT_EXTRA_WORDS * sizeof(int) + size addition can also overflow 3. This results in smaller allocations than expected, leading to buffer overflows during font data copying. Add explicit overflow checking using

    Publication Mise à jour
  10. CVE-2025-39964

    Élevée · CVSS 7.8EPSS 1,61%Dans le catalogue KEVCode d’exploitation publicCorrectif disponible

    crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg

    In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Disallow concurrent writes in af_alg_sendmsg Issuing two writes to the same af_alg socket is bogus as the data will be interleaved in an unpredictable fashion. Furthermore, concurrent writes may create inconsistencies in the internal socket state. Disallow this by adding a new ctx->write field that indiciates exclusive ownership for writing.

    • Mettez à jour vers 5.4.0-1151.161~18.04.1
    Publication Mise à jour
  11. CVE-2025-39961

    Élevée · CVSS 8.8EPSS 0,12%Aucun correctif publié

    iommu/amd/pgtbl: Fix possible race while increase page table level

    In the Linux kernel, the following vulnerability has been resolved: iommu/amd/pgtbl: Fix possible race while increase page table level The AMD IOMMU host page table implementation supports dynamic page table levels (up to 6 levels), starting with a 3-level configuration that expands based on IOVA address. The kernel maintains a root pointer and current page table level to enable proper page table walks in alloc_pte()/fetch_pte() operations. The IOMMU IOVA allocator initially starts with 32-bit address and onces its exhuasted it switches to 64-bit address (max address is determined based on IOMMU and device DMA capability). To support large

    Publication Mise à jour
  12. CVE-2025-39955

    Élevée · CVSS 7.8EPSS 0,17%Aucun correctif publié

    tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().

    In the Linux kernel, the following vulnerability has been resolved: tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect(). syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk in the TCP_ESTABLISHED state. [0] syzbot reused the server-side TCP Fast Open socket as a new client before the TFO socket completes 3WHS: 1. accept() 2. connect(AF_UNSPEC) 3. connect() to another destination As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes it to TCP_CLOSE and makes connect() possible, which restarts timers. Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the retransmit time

    Publication Mise à jour
  13. CVE-2023-53687

    Moyenne · CVSS 5.5EPSS 0,15%Correctif disponible

    tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk

    In the Linux kernel, the following vulnerability has been resolved: tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk When the best clk is searched, we iterate over all possible clk. If we find a better match, the previous one, if any, needs to be freed. If a better match has already been found, we still need to free the new one, otherwise it leaks.

    • Mettez à jour vers 5.4.0-1112.121~18.04.4
    Publication Mise à jour
  14. CVE-2023-53685

    Moyenne · CVSS 5.7EPSS 0,15%Aucun correctif publié

    tun: Fix memory leak for detached NAPI queue.

    In the Linux kernel, the following vulnerability has been resolved: tun: Fix memory leak for detached NAPI queue. syzkaller reported [0] memory leaks of sk and skb related to the TUN device with no repro, but we can reproduce it easily with: struct ifreq ifr = {} int fd_tun, fd_tmp; char buf[4] = {}; fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0); ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE; ioctl(fd_tun, TUNSETIFF, &ifr); ifr.ifr_flags = IFF_DETACH_QUEUE; ioctl(fd_tun, TUNSETQUEUE, &ifr); fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0); ifr.ifr_flags = IFF_UP; ioctl(fd_tmp, SIOCSIFFLAGS, &ifr); writ

    Publication Mise à jour
  15. CVE-2023-53683

    Élevée · CVSS 7.8EPSS 0,16%Correctif disponible

    fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode()

    In the Linux kernel, the following vulnerability has been resolved: fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode() syzbot is hitting WARN_ON() in hfsplus_cat_{read,write}_inode(), for crafted filesystem image can contain bogus length. There conditions are not kernel bugs that can justify kernel to panic.

    • Mettez à jour vers 5.4.0-1108.117~18.04.1
    Publication Mise à jour
  16. CVE-2023-53682

    Moyenne · CVSS 5.5EPSS 0,15%Aucun correctif publié

    hwmon: (xgene) Fix ioremap and memremap leak

    In the Linux kernel, the following vulnerability has been resolved: hwmon: (xgene) Fix ioremap and memremap leak Smatch reports: drivers/hwmon/xgene-hwmon.c:757 xgene_hwmon_probe() warn: 'ctx->pcc_comm_addr' from ioremap() not released on line: 757. This is because in drivers/hwmon/xgene-hwmon.c:701 xgene_hwmon_probe(), ioremap and memremap is not released, which may cause a leak. To fix this, ioremap and memremap is modified to devm_ioremap and devm_memremap. [groeck: Fixed formatting and subject]

    Publication Mise à jour
  17. CVE-2023-53681

    Moyenne · CVSS 5.7EPSS 0,15%Correctif disponible

    bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent

    In the Linux kernel, the following vulnerability has been resolved: bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent In some specific situations, the return value of __bch_btree_node_alloc may be NULL. This may lead to a potential NULL pointer dereference in caller function like a calling chain : btree_split->bch_btree_node_alloc->__bch_btree_node_alloc. Fix it by initializing the return value in __bch_btree_node_alloc.

    • Mettez à jour vers 5.4.0-1115.124~18.04.1
    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →