PatchFirst · Vulnérabilités récentes
Vulnérabilités publiées pour linux-bluefield au cours des 30 derniers jours : 523. Présentes dans le catalogue KEV : 0.
Vulnérabilités : 5417
In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.
In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix]
In the Linux kernel, the following vulnerability has been resolved: xfrm: account XFRMA_IF_ID in aevent size calculation xfrm_get_ae() allocates the reply skb with xfrm_aevent_msgsize(), then build_aevent() appends attributes including XFRMA_IF_ID when x->if_id is set. xfrm_aevent_msgsize() does not include space for XFRMA_IF_ID. For states with if_id, build_aevent() can fail with -EMSGSIZE and hit BUG_ON(err < 0) in xfrm_get_ae(), turning a malformed netlink interaction into a kernel panic. Account XFRMA_IF_ID in the size calculation unconditionally and replace the BUG_ON with normal error unwinding.
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix memory leak of BO array in hang state The hang state's BO array is allocated separately with kzalloc() in vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the missing kfree() for the BO array before freeing the hang state struct.
In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Fix a memory leak in hang state error path When vc4_save_hang_state() encounters an early return condition, it returns without freeing the previously allocated `kernel_state`, leaking memory. Add the missing kfree() calls by consolidating the early return paths into a single place.
In the Linux kernel, the following vulnerability has been resolved: net: lapbether: handle NETDEV_PRE_TYPE_CHANGE lapbeth_data_transmit() expects the underlying device type to be ARPHRD_ETHER. Returning NOTIFY_BAD from lapbeth_device_event() makes sure bonding driver can not break this expectation.
In the Linux kernel, the following vulnerability has been resolved: xsk: tighten UMEM headroom validation to account for tailroom and min frame The current headroom validation in xdp_umem_reg() could leave us with insufficient space dedicated to even receive minimum-sized ethernet frame. Furthermore if multi-buffer would come to play then skb_shared_info stored at the end of XSK frame would be corrupted. HW typically works with 128-aligned sizes so let us provide this value as bare minimum. Multi-buffer setting is known later in the configuration process so besides accounting for 128 bytes, let us also take care of tailroom space upfront.
In the Linux kernel, the following vulnerability has been resolved: xfrm: Wait for RCU readers during policy netns exit xfrm_policy_fini() frees the policy_bydst hash tables after flushing the policy work items and deleting all policies, but it does not wait for concurrent RCU readers to leave their read-side critical sections first. The policy_bydst tables are published via rcu_assign_pointer() and are looked up through rcu_dereference_check(), so netns teardown must also wait for an RCU grace period before freeing the table memory. Fix this by adding synchronize_rcu() before freeing the policy hash tables.
In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_mapping() struct xfrm_usersa_id has a one-byte padding hole after the proto field, which ends up never getting set to zero before copying out to userspace. Fix that up by zeroing out the whole structure before setting individual variables.
In the Linux kernel, the following vulnerability has been resolved: net: af_key: zero aligned sockaddr tail in PF_KEY exports PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr payload space, so IPv6 addresses occupy 32 bytes on the wire. However, `pfkey_sockaddr_fill()` initializes only the first 28 bytes of `struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized. Not every PF_KEY message is affected. The state and policy dump builders already zero the whole message buffer before filling the sockaddr payloads. Keep the fix to the export paths that still append aligned sockaddr payloads with plain `skb_p
In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send() appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put() helper only zeroes alignment padding after the payload, not the payload itself, so four bytes of stale kernel heap data are leaked to userspace in the NLMSG_DONE message body. Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes the nfgenmsg payload via nfnl_fill_hdr(),
In the Linux kernel, the following vulnerability has been resolved: l2tp: Drop large packets with UDP encap syzbot reported a WARN on my patch series [1]. The actual issue is an overflow of 16-bit UDP length field, and it exists in the upstream code. My series added a debug WARN with an overflow check that exposed the issue, that's why syzbot tripped on my patches, rather than on upstream code. syzbot's repro: r0 = socket$pppl2tp(0x18, 0x1, 0x1) r1 = socket$inet6_udp(0xa, 0x2, 0x0) connect$inet6(r1, &(0x7f00000000c0)={0xa, 0x0, 0x0, @loopback, 0xfffffffc}, 0x1c) connect$pppl2tp(r0, &(0x7f0000000240)=@pppol2tpin6={0x18, 0x1, {0x0, r1, 0x4,
In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl When page reassignment was added to af_alg_pull_tsgl the original loop wasn't updated so it may try to reassign one more page than necessary. Add the check to the reassignment so that this does not happen. Also update the comment which still refers to the obsolete offset argument.
In the Linux kernel, the following vulnerability has been resolved: crypto: algif_aead - Fix minimum RX size check for decryption The check for the minimum receive buffer size did not take the tag size into account during decryption. Fix this by adding the required extra length.
In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline data i_size during inode read When reading an inode from disk, ocfs2_validate_inode_block() performs various sanity checks but does not validate the size of inline data. If the filesystem is corrupted, an inode's i_size can exceed the actual inline data capacity (id_count). This causes ocfs2_dir_foreach_blk_id() to iterate beyond the inline data buffer, triggering a use-after-free when accessing directory entries from freed memory. In the syzbot report: - i_size was 1099511627576 bytes (~1TB) - Actual inline data capacity (id_count) is typicall
In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_write_end_inline KASAN reports a use-after-free write of 4086 bytes in ocfs2_write_end_inline, called from ocfs2_write_end_nolock during a copy_file_range splice fallback on a corrupted ocfs2 filesystem mounted on a loop device. The actual bug is an out-of-bounds write past the inode block buffer, not a true use-after-free. The write overflows into an adjacent freed page, which KASAN reports as UAF. The root cause is that ocfs2_try_to_write_inline_data trusts the on-disk id_count field to determine whether a write fits in inline da
In the Linux kernel, the following vulnerability has been resolved: x86-64: rename misleadingly named '__copy_user_nocache()' function This function was a masterclass in bad naming, for various historical reasons. It claimed to be a non-cached user copy. It is literally _neither_ of those things. It's a specialty memory copy routine that uses non-temporal stores for the destination (but not the source), and that does exception handling for both source and destination accesses. Also note that while it works for unaligned targets, any unaligned parts (whether at beginning or end) will not use non-temporal stores, since only words and quad
In the Linux kernel, the following vulnerability has been resolved: dcache: Limit the minimal number of bucket to two There is an OOB read problem on dentry_hashtable when user sets 'dhash_entries=1': BUG: unable to handle page fault for address: ffff888b30b774b0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page Oops: Oops: 0000 [#1] SMP PTI RIP: 0010:__d_lookup+0x56/0x120 Call Trace: d_lookup.cold+0x16/0x5d lookup_dcache+0x27/0xf0 lookup_one_qstr_excl+0x2a/0x180 start_dirop+0x55/0xa0 simple_start_creating+0x8d/0xa0 debugfs_start_creating+0x8c/0x180 debugfs_create_
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_ll: Fix firmware leak on error path Smatch reports: drivers/bluetooth/hci_ll.c:587 download_firmware() warn: 'fw' from request_firmware() not released on lines: 544. In download_firmware(), if request_firmware() succeeds but the returned firmware content is invalid (no data or zero size), the function returns without releasing the firmware, resulting in a resource leak. Fix this by calling release_firmware() before returning when request_firmware() succeeded but the firmware content is invalid.
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocate block from corrupted group in ext4_mb_find_by_goal() There's issue as follows: ... EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 with error 117 EXT4-fs (mmcblk0p1): This should not happen!! Data will be lost EXT4-fs (mmcblk0p1): Delayed block allocation failed for inode 206 at logical offset 0 with max blocks 1 w
Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.