In the Linux kernel, the following vulnerability has been resolved:
hfsplus: pretend special inodes as regular files
Since commit af153bb63a33 ("vfs: catch invalid modes in may_open()")
requires any inode be one of S_IFDIR/S_IFLNK/S_IFREG/S_IFCHR/S_IFBLK/
S_IFIFO/S_IFSOCK type, use S_IFREG for special inodes.
EFI/CPER: don't go past the ARM processor CPER record buffer
In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't go past the ARM processor CPER record buffer
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
In the Linux kernel, the following vulnerability has been resolved:
fbdev: of: display_timing: fix refcount leak in of_get_display_timings()
of_parse_phandle() returns a device_node with refcount incremented,
which is stored in 'entry' and then copied to 'native_mode'. When the
error paths at lines 184 or 192 jump to 'entryfail', native_mode's
refcount is not decremented, causing a refcount leak.
Fix this by changing the goto target from 'entryfail' to 'timingfail',
which properly calls of_node_put(native_mode) before cleanup.
In the Linux kernel, the following vulnerability has been resolved:
gfs2: fiemap page fault fix
In gfs2_fiemap(), we are calling iomap_fiemap() while holding the inode
glock. This can lead to recursive glock taking if the fiemap buffer is
memory mapped to the same inode and accessing it triggers a page fault.
Fix by disabling page faults for iomap_fiemap() and faulting in the
buffer by hand if necessary.
Fixes xfstest generic/742.
arm64: Add support for TSV110 Spectre-BHB mitigation
In the Linux kernel, the following vulnerability has been resolved:
arm64: Add support for TSV110 Spectre-BHB mitigation
The TSV110 processor is vulnerable to the Spectre-BHB (Branch History
Buffer) attack, which can be exploited to leak information through
branch prediction side channels. This commit adds the MIDR of TSV110
to the list for software mitigation.
media: cx88: Add missing unmap in snd_cx88_hw_params()
In the Linux kernel, the following vulnerability has been resolved:
media: cx88: Add missing unmap in snd_cx88_hw_params()
In error path, add cx88_alsa_dma_unmap() to release
resource acquired by cx88_alsa_dma_map().
In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas: fix WARNING in usb_tx_block
The function usb_tx_block() submits cardp->tx_urb without ensuring that
any previous transmission on this URB has completed. If a second call
occurs while the URB is still active (e.g. during rapid firmware loading),
usb_submit_urb() detects the active state and triggers a warning:
'URB submitted while active'.
Fix this by enforcing serialization: call usb_kill_urb() before
submitting the new request. This ensures the URB is idle and safe to reuse.
In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: move wait_on_sem() out of spinlock
With iommu.strict=1, the existing completion wait path can cause soft
lockups under stressed environment, as wait_on_sem() busy-waits under the
spinlock with interrupts disabled.
Move the completion wait in iommu_completion_wait() out of the spinlock.
wait_on_sem() only polls the hardware-updated cmd_sem and does not require
iommu->lock, so holding the lock during the busy wait unnecessarily
increases contention and extends the time with interrupts disabled.
In the Linux kernel, the following vulnerability has been resolved:
HID: prodikeys: Check presence of pm->input_ep82
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one.
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
In the Linux kernel, the following vulnerability has been resolved:
usb: chipidea: udc: fix DMA and SG cleanup in _ep_nuke()
The ChipIdea UDC driver can encounter "not page aligned sg buffer"
errors when a USB device is reconnected after being disconnected
during an active transfer. This occurs because _ep_nuke() returns
requests to the gadget layer without properly unmapping DMA buffers
or cleaning up scatter-gather bounce buffers.
Root cause:
When a disconnect happens during a multi-segment DMA transfer, the
request's num_mapped_sgs field and sgt.sgl pointer remain set with
stale values. The request is returned to the gadget driver with
9p/xen: protect xen_9pfs_front_free against concurrent calls
In the Linux kernel, the following vulnerability has been resolved:
9p/xen: protect xen_9pfs_front_free against concurrent calls
The xenwatch thread can race with other back-end change notifications
and call xen_9pfs_front_free() twice, hitting the observed general
protection fault due to a double-free. Guard the teardown path so only
one caller can release the front-end state at a time, preventing the
crash.
This is a fix for the following double-free:
[ 27.052347] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b6b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI
[ 27.052357] CPU: 0 UID: 0 PID: 32 Comm: xenwatc
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In the Linux kernel, the following vulnerability has been resolved:
media: i2c/tw9906: Fix potential memory leak in tw9906_probe()
In one of the error paths in tw9906_probe(), the memory allocated in
v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() is not freed. Fix that
by calling v4l2_ctrl_handler_free() on the handler in that error path.
kcm: fix zero-frag skb in frag_list on partial sendmsg error
In the Linux kernel, the following vulnerability has been resolved:
kcm: fix zero-frag skb in frag_list on partial sendmsg error
Syzkaller reported a warning in kcm_write_msgs() when processing a
message with a zero-fragment skb in the frag_list.
When kcm_sendmsg() fills MAX_SKB_FRAGS fragments in the current skb,
it allocates a new skb (tskb) and links it into the frag_list before
copying data. If the copy subsequently fails (e.g. -EFAULT from
user memory), tskb remains in the frag_list with zero fragments:
head skb (msg being assembled, NOT yet in sk_write_queue)
+-----------+
| frags[17] | (MAX_SKB_FRAGS, all filled with data)
In the Linux kernel, the following vulnerability has been resolved:
ntb: ntb_hw_switchtec: Fix array-index-out-of-bounds access
Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS,
This patch protects against invalid index out of bounds access to mw_sizes
When invalid access print message to user that configuration is not valid.
drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release
In the Linux kernel, the following vulnerability has been resolved:
drm/atmel-hlcdc: fix use-after-free of drm_crtc_commit after release
The atmel_hlcdc_plane_atomic_duplicate_state() callback was copying
the atmel_hlcdc_plane state structure without properly duplicating the
drm_plane_state. In particular, state->commit remained set to the old
state commit, which can lead to a use-after-free in the next
drm_atomic_commit() call.
Fix this by calling
__drm_atomic_helper_duplicate_plane_state(), which correctly clones
the base drm_plane_state (including the ->commit pointer).
It has been seen when closing and re-opening the device node while
team: avoid NETDEV_CHANGEMTU event when unregistering slave
In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inlin
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boun
net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets
In the Linux kernel, the following vulnerability has been resolved:
net: wan: farsync: Fix use-after-free bugs caused by unfinished tasklets
When the FarSync T-series card is being detached, the fst_card_info is
deallocated in fst_remove_one(). However, the fst_tx_task or fst_int_task
may still be running or pending, leading to use-after-free bugs when the
already freed fst_card_info is accessed in fst_process_tx_work_q() or
fst_process_int_work_q().
A typical race condition is depicted below:
CPU 0 (cleanup) | CPU 1 (tasklet)
| fst_start_xmit()
fst_remove_one() | tasklet_schedule()
unregis
In the Linux kernel, the following vulnerability has been resolved:
media: radio-keene: fix memory leak in error path
Fix a memory leak in usb_keene_probe(). The v4l2 control handler is
initialized and controls are added, but if v4l2_device_register() or
video_register_device() fails afterward, the handler was never freed,
leaking memory.
Add v4l2_ctrl_handler_free() call in the err_v4l2 error path to ensure
the control handler is properly freed for all error paths after it is
initialized.
In the Linux kernel, the following vulnerability has been resolved:
net/rds: Clear reconnect pending bit
When canceling the reconnect worker, care must be taken to reset the
reconnect-pending bit. If the reconnect worker has not yet been
scheduled before it is canceled, the reconnect-pending bit will stay
on forever.