mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
In the Linux kernel, the following vulnerability has been resolved:
mm/vmscan: report RCU-tasks quiescent states in shrink_lruvec()
I am seeing some rcu_tasks stalls in the Meta fleet during reclaim.
INFO: rcu_tasks detected stalls on tasks:
0000000088620d09: .. nvcsw: 6735/6735 holdout: 1 idle_cpu: -1/8
task:GlobalCPUThread state:R running task pid:2552016 tgid:2524552
Call Trace:
shrink_lruvec
mem_cgroup_iter
shrink_node
do_try_to_free_pages
try_to_free_pages
__alloc_frozen_pages_noprof
alloc_pages_noprof
pte_alloc_one
__pte_alloc
handle_mm_fault
Nothing promises direct reclaim returns in bounded ti
mm: memcg: stop reclaim when a limit update is superseded
In the Linux kernel, the following vulnerability has been resolved:
mm: memcg: stop reclaim when a limit update is superseded
kernfs serializes file operations only per open file, so separate open
files can update the same memory.high or memory.max file concurrently.
Both handlers store the new limit before synchronous reclaim, but continue
to use the writer's local target in the reclaim loop. If another writer
raises or removes the limit, the first writer can continue reclaiming
toward a stale target.
For memory.max, this can leave the writer looping indefinitely once
reclaim retries are exhausted. The OOM path sees sufficient margin u
tracing: Fix crash passing ERR_PTR to kthread_stop()
In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash passing ERR_PTR to kthread_stop()
event_test_stuff() calls kthread_run() and unconditionally passes the
returned task_struct pointer to kthread_stop(). kthread_run() returns an
error pointer such as ERR_PTR(-ENOMEM) when kthread creation fails, for
example under memory pressure during the boot-time event self-test.
kthread_stop() then dereferences the invalid pointer, crashing the kernel.
Check the result of kthread_run() before passing it to kthread_stop(). Use
WARN_ON() so that a failure to create the self-test thread does not go
unnoticed, matching th
device property: fix infinite loop in fwnode_for_each_child_node()
In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwn
rapidio: mport_cdev: fix use-after-free in dma_req_free()
In the Linux kernel, the following vulnerability has been resolved:
rapidio: mport_cdev: fix use-after-free in dma_req_free()
dma_req_free() acquires buf_mutex through req->map, drops the mapping
reference with kref_put(), and then dereferences req->map again to unlock
the mutex.
If kref_put() drops the last reference, mport_release_mapping() frees the
mapping, and the subsequent mutex_unlock() dereferences a freed object.
This is a use-after-free.
Fix this by caching map and md before kref_put(), clearing req->map while
holding buf_mutex, and using the cached md for mutex unlocking.
The bug is reachable from userspace via the RapidIO m
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
In the Linux kernel, the following vulnerability has been resolved:
Revert "media: v4l2-dev: fix error handling in __video_register_device()"
This reverts commit 2a934fdb01db6458288fc9386d3d8ceba6dd551a.
The intentions of that patch were good, but it doesn't work.
The idea is that if device_register fails, you have to do a put_device
to let the ref counter release resources.
However, the V4L2 API says that if video_register_device() fails, then
you have to call video_device_release(), which kfree()s the video_device
struct.
But the put_device() will already have freed the struct, so you end
up in a double-free scenario.
There is not re
In the Linux kernel, the following vulnerability has been resolved:
serial: imx: serialize imx_uart_ports[] lifetime
imx_uart_probe() publishes its devm-allocated port in imx_uart_ports[]
before uart_add_one_port() because console setup uses the table. The entry
is not cleared when adding the port fails or after removal, leaving a
dangling pointer.
A sibling probe can register the shared console through that stale entry.
This was reproduced under KASAN on QEMU mcimx6ul-evk by unbinding a
sibling UART, unbinding the console UART and rebinding the sibling.
Keep the entry valid through uart_remove_one_port(), then clear it. Protect
port addi
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or wo
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: u_audio: Fix use-after-free on sound card disconnect
g_audio_cleanup() invokes snd_card_free_when_closed() to initiate sound
card teardown and immediately frees the underlying struct snd_uac_chip
context. However, snd_card_free_when_closed() returns asynchronously
while ALSA control elements (kctls) remain open in userspace.
When userspace control applications access or close these open file
descriptors, kctl callbacks attempt to dereference kctl->private_data
pointing to &uac->c_prm or &uac->p_prm within the freed uac structure,
resulting in a use-after-free
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: fix dangling pointers in uvc_function_bind() and uvc_function_unbind()
In uvc_function_bind() error path, we use usb_ep_free_request which
uses uvc->control_req but does not set it to NULL afterwards. Thus,
uvc->control_req is a dangling pointer causing a UAF. Also we do not set
the uvc->control_buf pointer to NULL after freeing it, which is another
dangling pointer. Fix it by setting uvc->control_req to NULL after we run
usb_ep_free_request() and uvc->control_buf to NULL after kfree. Do the
same for uvc_function_unbind().
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Prevent deadlock during ep0 read loop
Currently, ffs_ep0_read() holds ffs->mutex when it prepares to go to
sleep waiting for an event. When no setup events are pending, it calls
wait_event_interruptible_exclusive_locked_irq() with the mutex still
held. The wait macro deliberately drops the waitqueue spinlock before
sleeping but does not drop the mutex.
If a userspace daemon is polling ep0 via read() and the gadget is
asynchronously torn down via configfs (e.g., echo "" > UDC), a
deadlock can occur:
1. The configfs teardown calls functionfs_unbind(), whi
fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write
In the Linux kernel, the following vulnerability has been resolved:
fpga: altera-cvp: Avoid out-of-bounds read in trailing byte write
The trailing byte path in altera_cvp_send_block() dereferences a u32
pointer even when only 1-3 bytes remain in the input buffer. If the buffer
ends at a page or scatterlist boundary, this can read past the valid image
data and fault.
Copy the remaining bytes into a zero-initialized u32 before writing the
final word so only valid bytes are read from the input buffer.
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
In the Linux kernel, the following vulnerability has been resolved:
HID: sensor-hub: Fix out-of-bounds write in sensor_hub_get_feature
sensor_hub_get_feature() clamps its return value to the caller's buffer
size, but the copy loop still copies field->report_size / 8 bytes for
each report value. A malicious HID descriptor can advertise a large
feature field size while an IIO caller supplies a small stack buffer,
such as a single s32, causing an out-of-bounds write.
HID core stores parsed report values in __s32 slots and clamps extracted
values to 32 bits. Reject feature fields that require more than one slot
per value, guard the total byte
lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()
In the Linux kernel, the following vulnerability has been resolved:
lib/ucs2_string.c: fix out-of-bounds read in ucs2_strnlen()
Patch series "lib/ucs2_string.c: fix out-of-bounds read in
ucs2_strnlen()", v2.
This series fixes an off-by-one out-of-bounds read in ucs2_strnlen().
The first patch is the real fix, the second patch comes as a bonus and
fixes the code indentation.
This patch (of 2):
ucs2_strnlen() checks the current character before checking whether the
caller-provided maximum length has been reached. If the input is not
NUL-terminated within that bound, the loop can read one ucs2_char_t past
the limit.
Test the length befo
media: cec: stm32: prevent out-of-bounds write on RX overflow
In the Linux kernel, the following vulnerability has been resolved:
media: cec: stm32: prevent out-of-bounds write on RX overflow
stm32_rx_done() appends each received CEC byte to rx_msg.msg[] using
rx_msg.len as the write index, incrementing it on every RXBR
(receive-byte-ready) interrupt without checking it against the buffer
size:
cec->rx_msg.msg[cec->rx_msg.len++] = val & 0xFF;
rx_msg.msg[] is a fixed CEC_MAX_MSG_SIZE (16) byte array in struct
cec_msg, and rx_msg.len is only reset on RXACKE/RXOVR or after a
completed message (RXEND). The number of bytes received before RXEND is
decided by the remote CEC device (it sets EOM), not by t
media: vicodec: fix out-of-bounds write in FWHT encoder
In the Linux kernel, the following vulnerability has been resolved:
media: vicodec: fix out-of-bounds write in FWHT encoder
vidioc_s_fmt_vid_out() sizes the encoder CAPTURE buffer from the
compressed descriptor pixfmt_fwht, whose sizeimage_mult is 3:
coded_w * coded_h * 3 + sizeof(struct fwht_cframe_hdr). fwht_encode_frame()
encodes one plane per component, and an incompressible plane takes the
FWHT_FRAME_UNENCODED path in encode_plane(), copying the plane verbatim.
For a 4-component pixel format all four planes are full resolution
(width_div == height_div == 1), so a frame that forces every plane
through the unencoded fallback writes
size
nilfs2: fix slab-out-of-bounds in nilfs_direct_propagate after truncation
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix slab-out-of-bounds in nilfs_direct_propagate after truncation
Shuangpeng Bai reported that KASAN detected a slab-out-of-bounds error
in nilfs_direct_propagate() during testing.
Analysis revealed that after truncating a file, a node block immediately
below the B-tree root was not deleted. Instead, it remained in the B-tree
node cache in a dirty state. The log writer subsequently detected this
block and incorrectly invoked nilfs_direct_propagate() on it, which is
designed to handle only data blocks in direct mapping.
B-tree nodes in the cache are managed by vi
PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io()
In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io()
pci_write_legacy_io() loads 4 bytes from the kernfs write buffer
regardless of how many bytes userspace wrote:
if (count != 1 && count != 2 && count != 4)
return -EINVAL;
return pci_legacy_write(bus, off, *(u32 *)buf, count);
kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1),
so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and
the unconditional u32 load reads up to 2 bytes past the end of the
allocation, which KASAN reports as a slab-out-of-bounds read.
Similarly, a
ubifs: fix out-of-bounds read in signature length check
In the Linux kernel, the following vulnerability has been resolved:
ubifs: fix out-of-bounds read in signature length check
ubifs_sb_verify_signature() bounds the on-disk ubifs_sig_node->len field
before handing the signature payload to verify_pkcs7_signature(), but the
check has the wrong sign:
if (le32_to_cpu(signode->len) > snod->len + sizeof(struct ubifs_sig_node))
The signature bytes start sizeof(struct ubifs_sig_node) (UBIFS_SIG_NODE_SZ,
64 bytes) into the node, so the payload is at most
snod->len - sizeof(struct ubifs_sig_node)
bytes long. Adding the header size instead of subtracting it accepts a
declared length up to 2 * UBIF
zram: fix out-of-bounds access in read_block_state()
In the Linux kernel, the following vulnerability has been resolved:
zram: fix out-of-bounds access in read_block_state()
read_block_state() calculates nr_pages before taking dev_lock. If the
device is reset and reinitialized with a smaller disksize before lock
acquisition, nr_pages still describes the old table. The subsequent loop
can then call slot_lock() past the end of the newly allocated table.
Read disksize after acquiring dev_lock and checking that the device is
initialized. The read lock then keeps the table and its bound stable for
the duration of the scan.