wifi: carl9170: do not ping device which has failed to load firmware
In the Linux kernel, the following vulnerability has been resolved:
wifi: carl9170: do not ping device which has failed to load firmware
Syzkaller reports [1, 2] crashes caused by an attempts to ping
the device which has failed to load firmware. Since such a device
doesn't pass 'ieee80211_register_hw()', an internal workqueue
managed by 'ieee80211_queue_work()' is not yet created and an
attempt to queue work on it causes null-ptr-deref.
[1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
[2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217
NFC: nci: uart: Set tty->disc_data only in success path
In the Linux kernel, the following vulnerability has been resolved:
NFC: nci: uart: Set tty->disc_data only in success path
Setting tty->disc_data before opening the NCI device means we need to
clean it up on error paths. This also opens some short window if device
starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded
(broken hardware?). Close the window by exposing tty->disc_data only on
the success path, when opening of the NCI device and try_module_get()
succeeds.
The code differs in error path in one aspect: tty->disc_data won't be
ever assigned thus NULL-ified. This however should not be relevant
difference, because of
In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check return result of sb_min_blocksize
Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug.
Syzkaller forks multiple processes which after mounting the Squashfs
filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000).
Now if this ioctl occurs at the same time another process is in the
process of mounting a Squashfs filesystem on /dev/loop0, the failure
occurs. When this happens the following code in squashfs_fill_super()
fails.
----
msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE);
msblk->devblksize_log2 = f
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix a fence leak in submit error path
In error paths, we could unref the submit without calling
drm_sched_entity_push_job(), so msm_job_free() will never get
called. Since drm_sched_job_cleanup() will NULL out the
s_fence, we can use that to detect this case.
Patchwork: https://patchwork.freedesktop.org/patch/653584/
drm/msm: Fix another leak in the submit error path
In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix another leak in the submit error path
put_unused_fd() doesn't free the installed file, if we've already done
fd_install(). So we need to also free the sync_file.
Patchwork: https://patchwork.freedesktop.org/patch/653583/
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: remove WARN on bad firmware input
If the firmware gives bad input, that's nothing to do with
the driver's stack at this point etc., so the WARN_ON()
doesn't add any value. Additionally, this is one of the
top syzbot reports now. Just print a message, and as an
added bonus, print the sizes too.
vsock/vmci: Clear the vmci transport packet properly when initializing it
In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: Clear the vmci transport packet properly when initializing it
In vmci_transport_packet_init memset the vmci_transport_packet before
populating the fields to avoid any uninitialised data being left in the
structure.
mtk-sd: Prevent memory corruption from DMA map failure
In the Linux kernel, the following vulnerability has been resolved:
mtk-sd: Prevent memory corruption from DMA map failure
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
ACPICA: Refuse to evaluate a method if arguments are missing
In the Linux kernel, the following vulnerability has been resolved:
ACPICA: Refuse to evaluate a method if arguments are missing
As reported in [1], a platform firmware update that increased the number
of method parameters and forgot to update a least one of its callers,
caused ACPICA to crash due to use-after-free.
Since this a result of a clear AML issue that arguably cannot be fixed
up by the interpreter (it cannot produce missing data out of thin air),
address it by making ACPICA refuse to evaluate a method if the caller
attempts to pass fewer arguments than expected to it.
rose: fix dangling neighbour pointers in rose_rt_device_down()
In the Linux kernel, the following vulnerability has been resolved:
rose: fix dangling neighbour pointers in rose_rt_device_down()
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checke
Élevée · CVSS 7.8EPSS 1,36%Dans le catalogue KEVAucun correctif publié
posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()
In the Linux kernel, the following vulnerability has been resolved:
posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_
wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()
In the Linux kernel, the following vulnerability has been resolved:
wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()
Robert Morris reported:
|If a malicious USB device pretends to be an Intersil p54 wifi
|interface and generates an eeprom_readback message with a large
|eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the
|message beyond the end of priv->eeprom.
|
|static void p54_rx_eeprom_readback(struct p54_common *priv,
| struct sk_buff *skb)
|{
| struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
| struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr-
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on ino and xnid
syzbot reported a f2fs bug as below:
INFO: task syz-executor140:5308 blocked for more than 143 seconds.
Not tainted 6.14.0-rc7-syzkaller-00069-g81e4f8d68c66 #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-executor140 state:D stack:24016 pid:5308 tgid:5308 ppid:5306 task_flags:0x400140 flags:0x00000006
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5378 [inline]
__schedule+0x190e/0x4c90 kernel/sched/core.c:6765
__schedule_loop kernel/sched/core.c:6842 [inline]
schedule+0
In the Linux kernel, the following vulnerability has been resolved:
ACPICA: fix acpi operand cache leak in dswstate.c
ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732
I found an ACPI cache leak in ACPI early termination and boot continuing case.
When early termination occurs due to malicious ACPI table, Linux kernel
terminates ACPI function and continues to boot process. While kernel terminates
ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak.
Boot log of ACPI operand cache leak is as follows:
>[ 0.585957] ACPI: Added _OSI(Module Device)
>[ 0.587218] ACPI: Added _OSI(Processor Device)
>[ 0.588530] ACPI:
In the Linux kernel, the following vulnerability has been resolved:
ACPICA: fix acpi parse and parseext cache leaks
ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5
I'm Seunghun Han, and I work for National Security Research Institute of
South Korea.
I have been doing a research on ACPI and found an ACPI cache leak in ACPI
early abort cases.
Boot log of ACPI cache leak is as follows:
[ 0.352414] ACPI: Added _OSI(Module Device)
[ 0.353182] ACPI: Added _OSI(Processor Device)
[ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.353182] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.356028] ACPI: Unable to start the
jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata()
In the Linux kernel, the following vulnerability has been resolved:
jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata()
Since handle->h_transaction may be a NULL pointer, so we should change it
to call is_handle_aborted(handle) first before dereferencing it.
And the following data-race was reported in my fuzzer:
==================================================================
BUG: KCSAN: data-race in jbd2_journal_dirty_metadata / jbd2_journal_dirty_metadata
write to 0xffff888011024104 of 4 bytes by task 10881 on cpu 1:
jbd2_journal_dirty_metadata+0x2a5/0x770 fs/jbd2/transaction.c:1556
__ext4_handle_dirty_metadata+
ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
In the Linux kernel, the following vulnerability has been resolved:
ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330
The controller has a hardware bug that can hard hang the system when
doing ATAPI DMAs without any trace of what happened. Depending on the
device attached, it can also prevent the system from booting.
In this case, the system hangs when reading the ATIP from optical media
with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an
Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4,
running at UDMA/33.
The issue can be reproduced by running the same command with a cygwin
build of cdrecord on Wi
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to bail out in get_new_segment()
------------[ cut here ]------------
WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc
pc : new_curseg+0x5e8/0x6dc
Call trace:
new_curseg+0x5e8/0x6dc
f2fs_allocate_data_block+0xa54/0xe28
do_write_page+0x6c/0x194
f2fs_do_write_node_page+0x38/0x78
__write_node_page+0x248/0x6d4
f2fs_sync_node_pages+0x524/0x72c
f2fs_write_checkpoint+0x4bc/0x9b0
__checkpoint_and_complete_reqs+0x80/0x244
issue_checkpoint_thread+0x8c/0xec
kthread+0x114/0x1bc
ret_from_fork+0x10/0x20
get_new_segment() detects inconsistent
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
In the Linux kernel, the following vulnerability has been resolved:
jffs2: check jffs2_prealloc_raw_node_refs() result in few other places
Fuzzing hit another invalid pointer dereference due to the lack of
checking whether jffs2_prealloc_raw_node_refs() completed successfully.
Subsequent logic implies that the node refs have been allocated.
Handle that. The code is ready for propagating the error upwards.
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:jff
mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu().
In the Linux kernel, the following vulnerability has been resolved:
mpls: Use rcu_dereference_rtnl() in mpls_route_input_rcu().
As syzbot reported [0], mpls_route_input_rcu() can be called
from mpls_getroute(), where is under RTNL.
net->mpls.platform_label is only updated under RTNL.
Let's use rcu_dereference_rtnl() in mpls_route_input_rcu() to
silence the splat.
[0]:
WARNING: suspicious RCU usage
6.15.0-rc7-syzkaller-00082-g5cdb2c77c4c3 #0 Not tainted
----------------------------
net/mpls/af_mpls.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock h