ocfs2: always run deallocs on copy-on-write completion
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: always run deallocs on copy-on-write completion
Local fuzzing of 6.12.94 has found the following memory leak
caused by doing 'copy_file_range()' within the same filesystem:
unreferenced object 0xffff88812192c980 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 ................
c0 c5 92 21 81 88 ff ff 00 02 00 00 00 06 00 00 ...!............
backtrace (crc 7068d63f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:41
ocfs2: bound namelen in dlm_migrate_request_handler
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: bound namelen in dlm_migrate_request_handler
Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm".
The o2dlm receive handlers trust u8 length and count fields from the wire
without bounding them, so a node in a DLM domain can corrupt or panic any
other node with a malformed message. Three defects:
- dlm_migrate_request_handler() passes migrate->namelen unchecked to
dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an
o2dlm_mle slab object: a heap out-of-bounds write of up to ~215
attacker-controlled bytes.
- dlm_mig_lo
ocfs2: validate lengths in dlm_mig_lockres_handler
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate lengths in dlm_mig_lockres_handler
A node receiving a DLM_MIG_LOCKRES message trusts several fields of the
peer-supplied dlm_migratable_lockres without validation. num_locks and
lockname_len are bounded only on the sending side, and the message is
never checked to actually carry num_locks migratable_lock entries. As a
result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the
kmalloc(data_len) copy of the message (an out-of-bounds read that ends in
a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the
fixed 32-byte o2dlm_
ocfs2: validate rl_used against rl_count in refcount block validator
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate rl_used against rl_count in refcount block validator
ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array
with:
for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) {
rec = &rb->rf_records.rl_recs[i];
...
rl_recs[] lives in a single metadata block (4096 bytes on the common
configuration), so its real capacity is fixed by
ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the
16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly
off disk by ocfs2_validate_refcount_block() and are never checked against
ocfs2: validate directory-index entry counts when reading metadata
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate directory-index entry counts when reading metadata
ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and
signature of an indexed-directory block before it reaches higher-level
callers, but neither validator bounds the ocfs2_dx_entry_list counts
against the capacity of the block that holds them.
ocfs2_dx_dir_search() then walks
for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++)
dx_entry = &entry_list->de_entries[i];
over de_num_used entries with no bounds check. entry_list is either
dx_leaf->dl_list (from ocfs2_read_dx_leaf) o
ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: cluster: don't sleep while holding o2hb_live_lock in o2hb_region_pin()
Patch series "ocfs2: cluster: o2hb_region_pin() fixes", v2.
This series fixes three related issues in o2hb_region_pin(), all are from
the original implementation in commit: 58a3158a5d17 ("ocfs2/cluster:
Pin/unpin o2hb regions"):
1) It is called with o2hb_live_lock (a spinlock) held, but the
underlying configfs_depend_item() sleeps (takes inode rwsem and
pins the filesystem). This triggers BUG under
CONFIG_DEBUG_ATOMIC_SLEEP.
2) When called from the configfs drop_item callback, it crea
ocfs2: fix readdir position truncation on 32-bit kernels
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix readdir position truncation on 32-bit kernels
In ocfs2_dir_foreach_blk_el(), the directory cookie position is
rebuilt with
ctx->pos = (ctx->pos & ~(sb->s_blocksize - 1)) | offset;
`ctx->pos` is loff_t (signed 64-bit), while `sb->s_blocksize` is
unsigned long. On 32-bit kernels unsigned long is 32-bit, so the mask
~(sb->s_blocksize - 1)
is computed as a 32-bit unsigned value (e.g. 0xfffff000 for a 4 KiB
block size). In the AND expression with the 64-bit `ctx->pos`, that
unsigned operand is zero-extended to 64 bits per the usual arithmetic
conversions, yiel
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
In the Linux kernel, the following vulnerability has been resolved:
openrisc: fix arbitrary kernel memory access via or1k_atomic syscall
sys_or1k_atomic() (syscall 244 in the "or1k" ABI) takes two user
pointers, v1 and v2, and swaps the words they point to in hand-written
assembly.
l.lwz r29,0(r4)
l.lwz r27,0(r5)
l.sw 0(r4),r27
l.sw 0(r5),r29
The pointers are not checked with access_ok(). The four memory
accesses also have no exception table entries.
A caller passes a kernel address as either pointer, and the syscall
reads from and writes to it directly.
This gives an unprivileged process a kernel read/write pr
openvswitch: only skb_tx_error() a packet we are about to drop
In the Linux kernel, the following vulnerability has been resolved:
openvswitch: only skb_tx_error() a packet we are about to drop
queue_userspace_packet() borrows the packet skb -- it only copies it into
a private netlink message (user_skb) and does not own it; on return
do_execute_actions() keeps forwarding it through the flow's remaining
actions. Its error path nevertheless calls skb_tx_error(skb), which via
skb_zcopy_clear() does skb_shinfo(skb)->flags &= ~SKBFL_ALL_ZEROCOPY,
stripping SKBFL_SHARED_FRAG from that live skb (skb_tx_error()'s kerneldoc
says "skb must be freed afterwards").
For a MSG_ZEROCOPY skb carrying page-cache frags,
lockd: pin next file across nlm_inspect_file lock-drop
In the Linux kernel, the following vulnerability has been resolved:
lockd: pin next file across nlm_inspect_file lock-drop
nlm_traverse_files() pins the current file with f_count++ across
a mutex_unlock for nlm_inspect_file(), but nothing pins the saved
next pointer. A concurrent nlm_release_file() can kfree the next
file during the unlock window, and the iterator dereferences freed
memory on the next loop step.
Pin both current and next before the lock-drop. Advance by
swapping the pinned cursors at the end of each iteration so next
is always held alive across the unlock.
Always call nlm_file_release() after dropping the iteration pin,
lockd: fix NULL dereference on lockowner allocation failure
In the Linux kernel, the following vulnerability has been resolved:
lockd: fix NULL dereference on lockowner allocation failure
nlmclnt_locks_init_private() installs NLM file lock operations even when
nlmclnt_find_lockowner() fails to allocate a lockowner. nlmclnt_proc()
then returns -ENOMEM, but the VFS still tears down the partially
initialized file_lock and calls locks_release_private().
That invokes nlmclnt_locks_release_private(), which dereferences
fl->fl_u.nfs_fl.owner and crashes because the owner was never installed.
Clear fl_ops before attempting to initialize the NLM private state, and
install the NLM lock operations only after
sctp: stop processing a packet once its association is deleted
In the Linux kernel, the following vulnerability has been resolved:
sctp: stop processing a packet once its association is deleted
sctp_endpoint_bh_rcv() looks the association up only when chunk->asoc is
NULL, and caches the result in chunk->asoc and chunk->transport without
taking a reference.
A packet that matches no association is handed to the endpoint, so a peer
can bundle COOKIE ECHO, SHUTDOWN and SHUTDOWN ACK in one packet. The
COOKIE ECHO creates the association, the SHUTDOWN chunk caches it, and
with the outqueue empty the SHUTDOWN ACK reaches sctp_sf_do_9_2_final(),
so the association and its transports are freed.
The endpoint l
In the Linux kernel, the following vulnerability has been resolved:
sctp: drop a chunk if its transport was removed
sctp_rcv() resolves the transport once per packet and leaves it in
chunk->transport. The lookup reference, or the one sctp_add_backlog() takes
if the socket is owned by userspace, keeps it around until the chunk has
been processed.
An authenticated ASCONF DEL-IP can remove it in the meantime.
sctp_assoc_rm_peer() takes the transport out of the association and calls
sctp_transport_free(), which tags it dead and drops the reference the
association held. There is a window on both paths: the packet can sit on
the socket backlog,
power: supply: bq24257: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq24257: fix use-after-free on remove
The STAT-pin interrupt is devm-managed, so it stays armed until the devm
cleanup that runs after remove() returns. remove() cancels
bq->iilimit_setup_work while the threaded handler can still fire; that
handler reschedules the work and dereferences bq, so the work runs
against freed memory once devm frees bq.
Make the delayed work device-managed with devm_delayed_work_autocancel(),
registered before the interrupt request. The devm cleanup then releases
the interrupt first, so the handler can no longer reschedule the work
power: supply: charger-manager: register regulators before exposing sysfs
In the Linux kernel, the following vulnerability has been resolved:
power: supply: charger-manager: register regulators before exposing sysfs
charger_manager_remove() and the err_reg_extcon probe error path free each
charger regulator with regulator_put() before tearing down the power_supply
sysfs entries (power_supply_unregister()). charger_manager_remove() also
calls try_charger_enable(cm, false) after the regulator_put() loop. A
concurrent write to a charger's externally_control sysfs attribute that
lands between regulator_put() and power_supply_unregister() can run
charger_externally_control_store() and call try_charger_enable(), which,
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8727: fix use-after-free in lp8727_release_irq()
lp8727_isr_func(), the threaded IRQ handler, is the only caller that arms
pchg->work via schedule_delayed_work(). lp8727_release_irq() currently
cancels the work before freeing the IRQ, so an IRQ delivered in between
can re-arm the work through the threaded handler. After .remove returns
the devm layer frees pchg while lp8727_delayed_func() may still run and
dereference it.
Free the IRQ first so the threaded handler is quiesced and can no longer
queue work, then cancel the delayed work to drain the final g
power: supply: lp8788-charger: fix use-after-free on remove
In the Linux kernel, the following vulnerability has been resolved:
power: supply: lp8788-charger: fix use-after-free on remove
lp8788_charger_remove() flushes charger_work before unregistering the
IRQs. An IRQ thread can queue charger_work after flush_work() has
returned. The work can then run after devres frees pchg and dereference
it in lp8788_charger_event().
Unregister the IRQs first. free_irq() waits for any running threaded
handler, so no handler can queue more work afterwards. Then use
cancel_work_sync() to cancel pending work or wait for running work to
finish.
This issue was found by an in-house static analysis tool.
power: supply: rt9455: quiesce delayed work before teardown
In the Linux kernel, the following vulnerability has been resolved:
power: supply: rt9455: quiesce delayed work before teardown
The threaded IRQ handler can queue pwr_rdy_work,
max_charging_time_work and batt_presence_work. pwr_rdy_work and
batt_presence_work can also queue max_charging_time_work, while
batt_presence_work can requeue itself.
rt9455_remove() cancels max_charging_time_work before
batt_presence_work. The latter can therefore queue
max_charging_time_work after it has already been cancelled:
rt9455_remove() workqueue
cancel pwr_rdy_work
cancel max_charging_time_work
power: supply: twl4030_charger: cancel workers via devm
In the Linux kernel, the following vulnerability has been resolved:
power: supply: twl4030_charger: cancel workers via devm
bci is devm-allocated. Two workers (bci->work and bci->current_worker)
dereference it. twl4030_bci_remove() disables charging and masks
interrupts. It cancels neither worker. A worker pending at remove() can
run after devm frees bci.
The USB transceiver comes from devm_usb_get_phy_by_node(). devm
unregisters its notifier only after remove() returns. A cancel_work_sync()
in remove() can then race a notifier reschedule. devm_work_autocancel()
and devm_delayed_work_autocancel() avoid that. They cancel the workers
during
In the Linux kernel, the following vulnerability has been resolved:
power: supply: max17040: propagate register read errors
max17040_get_vcell() and max17040_get_soc() ignore errors returned by
regmap_read(). When an I2C transfer fails, the uninitialized register
value is converted and reported to userspace as a valid voltage or state
of charge. The polling worker can also replace the cached state of charge
with the bogus value and emit a spurious change event.
Propagate read errors through the power supply get_property callback and
keep the last valid cached state of charge when polling fails.