p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-fips · Page n° 186

Vulnérabilités publiées pour linux-fips au cours des 30 derniers jours : 404. Présentes dans le catalogue KEV : 0.

RSS ↗ JSON ↗
Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 6635

  1. CVE-2025-38415

    Élevée · CVSS 7.8EPSS 0,22%Aucun correctif publié

    Squashfs: check return result of sb_min_blocksize

    In the Linux kernel, the following vulnerability has been resolved: Squashfs: check return result of sb_min_blocksize Syzkaller reports an "UBSAN: shift-out-of-bounds in squashfs_bio_read" bug. Syzkaller forks multiple processes which after mounting the Squashfs filesystem, issues an ioctl("/dev/loop0", LOOP_SET_BLOCK_SIZE, 0x8000). Now if this ioctl occurs at the same time another process is in the process of mounting a Squashfs filesystem on /dev/loop0, the failure occurs. When this happens the following code in squashfs_fill_super() fails. ---- msblk->devblksize = sb_min_blocksize(sb, SQUASHFS_DEVBLK_SIZE); msblk->devblksize_log2 = f

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  2. CVE-2025-38410

    Moyenne · CVSS 6.8EPSS 0,19%Aucun correctif publié

    drm/msm: Fix a fence leak in submit error path

    In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix a fence leak in submit error path In error paths, we could unref the submit without calling drm_sched_entity_push_job(), so msm_job_free() will never get called. Since drm_sched_job_cleanup() will NULL out the s_fence, we can use that to detect this case. Patchwork: https://patchwork.freedesktop.org/patch/653584/

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  3. CVE-2025-38409

    Moyenne · CVSS 5.5EPSS 0,19%Aucun correctif publié

    drm/msm: Fix another leak in the submit error path

    In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix another leak in the submit error path put_unused_fd() doesn't free the installed file, if we've already done fd_install(). So we need to also free the sync_file. Patchwork: https://patchwork.freedesktop.org/patch/653583/

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  4. CVE-2025-38406

    Moyenne · CVSS 5.5EPSS 0,21%Aucun correctif publié

    wifi: ath6kl: remove WARN on bad firmware input

    In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: remove WARN on bad firmware input If the firmware gives bad input, that's nothing to do with the driver's stack at this point etc., so the WARN_ON() doesn't add any value. Additionally, this is one of the top syzbot reports now. Just print a message, and as an added bonus, print the sizes too.

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  5. CVE-2025-38403

    Élevée · CVSS 7.8EPSS 0,22%Aucun correctif publié

    vsock/vmci: Clear the vmci transport packet properly when initializing it

    In the Linux kernel, the following vulnerability has been resolved: vsock/vmci: Clear the vmci transport packet properly when initializing it In vmci_transport_packet_init memset the vmci_transport_packet before populating the fields to avoid any uninitialised data being left in the structure.

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  6. CVE-2025-38401

    Élevée · CVSS 7.8EPSS 0,21%Aucun correctif publié

    mtk-sd: Prevent memory corruption from DMA map failure

    In the Linux kernel, the following vulnerability has been resolved: mtk-sd: Prevent memory corruption from DMA map failure If msdc_prepare_data() fails to map the DMA region, the request is not prepared for data receiving, but msdc_start_data() proceeds the DMA with previous setting. Since this will lead a memory corruption, we have to stop the request operation soon after the msdc_prepare_data() fails to prepare it.

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  7. CVE-2025-38386

    Élevée · CVSS 7.8EPSS 0,21%Aucun correctif publié

    ACPICA: Refuse to evaluate a method if arguments are missing

    In the Linux kernel, the following vulnerability has been resolved: ACPICA: Refuse to evaluate a method if arguments are missing As reported in [1], a platform firmware update that increased the number of method parameters and forgot to update a least one of its callers, caused ACPICA to crash due to use-after-free. Since this a result of a clear AML issue that arguably cannot be fixed up by the interpreter (it cannot produce missing data out of thin air), address it by making ACPICA refuse to evaluate a method if the caller attempts to pass fewer arguments than expected to it.

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  8. CVE-2025-38377

    Élevée · CVSS 8.8EPSS 0,28%Aucun correctif publié

    rose: fix dangling neighbour pointers in rose_rt_device_down()

    In the Linux kernel, the following vulnerability has been resolved: rose: fix dangling neighbour pointers in rose_rt_device_down() There are two bugs in rose_rt_device_down() that can cause use-after-free: 1. The loop bound `t->count` is modified within the loop, which can cause the loop to terminate early and miss some entries. 2. When removing an entry from the neighbour array, the subsequent entries are moved up to fill the gap, but the loop index `i` is still incremented, causing the next entry to be skipped. For example, if a node has three neighbours (A, A, B) with count=3 and A is being removed, the second A is not checke

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  9. CVE-2025-38375

    Élevée · CVSS 8.4EPSS 0,21%Aucun correctif publié

    virtio-net: ensure the received length does not exceed allocated size

    In the Linux kernel, the following vulnerability has been resolved: virtio-net: ensure the received length does not exceed allocated size In xdp_linearize_page, when reading the following buffers from the ring, we forget to check the received length with the true allocate size. This can lead to an out-of-bound read. This commit adds that missing check.

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  10. CVE-2025-38361

    Élevée · CVSS 7.8EPSS 0,24%Aucun correctif publié

    drm/amd/display: Check dce_hwseq before dereferencing it

    In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check dce_hwseq before dereferencing it [WHAT] hws was checked for null earlier in dce110_blank_stream, indicating hws can be null, and should be checked whenever it is used. (cherry picked from commit 79db43611ff61280b6de58ce1305e0b2ecf675ad)

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  11. CVE-2025-38352

    Élevée · CVSS 7.8EPSS 1,36%Dans le catalogue KEVAucun correctif publié

    posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del()

    In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: fix race between handle_posix_cpu_timers() and posix_cpu_timer_del() If an exiting non-autoreaping task has already passed exit_notify() and calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent or debugger right after unlock_task_sighand(). If a concurrent posix_cpu_timer_del() runs at that moment, it won't be able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or lock_task_sighand() will fail. Add the tsk->exit_state check into run_posix_cpu_timers() to fix this. This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  12. CVE-2025-38348

    Élevée · CVSS 7.8EPSS 0,2%Aucun correctif publié

    wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback()

    In the Linux kernel, the following vulnerability has been resolved: wifi: p54: prevent buffer-overflow in p54_rx_eeprom_readback() Robert Morris reported: |If a malicious USB device pretends to be an Intersil p54 wifi |interface and generates an eeprom_readback message with a large |eeprom->v1.len, p54_rx_eeprom_readback() will copy data from the |message beyond the end of priv->eeprom. | |static void p54_rx_eeprom_readback(struct p54_common *priv, | struct sk_buff *skb) |{ | struct p54_hdr *hdr = (struct p54_hdr *) skb->data; | struct p54_eeprom_lm86 *eeprom = (struct p54_eeprom_lm86 *) hdr-

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  13. CVE-2025-38347

    Élevée · CVSS 7.1EPSS 0,19%Aucun correctif publié

    f2fs: fix to do sanity check on ino and xnid

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to do sanity check on ino and xnid syzbot reported a f2fs bug as below: INFO: task syz-executor140:5308 blocked for more than 143 seconds. Not tainted 6.14.0-rc7-syzkaller-00069-g81e4f8d68c66 #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor140 state:D stack:24016 pid:5308 tgid:5308 ppid:5306 task_flags:0x400140 flags:0x00000006 Call Trace: <TASK> context_switch kernel/sched/core.c:5378 [inline] __schedule+0x190e/0x4c90 kernel/sched/core.c:6765 __schedule_loop kernel/sched/core.c:6842 [inline] schedule+0

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  14. CVE-2025-38346

    Élevée · CVSS 7.8EPSS 0,2%Aucun correctif publié

    ftrace: Fix UAF when lookup kallsym after ftrace disabled

    In the Linux kernel, the following vulnerability has been resolved: ftrace: Fix UAF when lookup kallsym after ftrace disabled The following issue happens with a buggy module: BUG: unable to handle page fault for address: ffffffffc05d0218 PGD 1bd66f067 P4D 1bd66f067 PUD 1bd671067 PMD 101808067 PTE 0 Oops: Oops: 0000 [#1] SMP KASAN PTI Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS RIP: 0010:sized_strscpy+0x81/0x2f0 RSP: 0018:ffff88812d76fa08 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffffffc0601010 RCX: dffffc0000000000 RDX: 0000000000000038 RSI: dffffc0000000000 RDI: ffff88812608

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  15. CVE-2025-38345

    Moyenne · CVSS 5.5EPSS 0,2%Aucun correctif publié

    ACPICA: fix acpi operand cache leak in dswstate.c

    In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi operand cache leak in dswstate.c ACPICA commit 987a3b5cf7175916e2a4b6ea5b8e70f830dfe732 I found an ACPI cache leak in ACPI early termination and boot continuing case. When early termination occurs due to malicious ACPI table, Linux kernel terminates ACPI function and continues to boot process. While kernel terminates ACPI function, kmem_cache_destroy() reports Acpi-Operand cache leak. Boot log of ACPI operand cache leak is as follows: >[ 0.585957] ACPI: Added _OSI(Module Device) >[ 0.587218] ACPI: Added _OSI(Processor Device) >[ 0.588530] ACPI:

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  16. CVE-2025-38344

    Moyenne · CVSS 5.5EPSS 0,2%Aucun correctif publié

    ACPICA: fix acpi parse and parseext cache leaks

    In the Linux kernel, the following vulnerability has been resolved: ACPICA: fix acpi parse and parseext cache leaks ACPICA commit 8829e70e1360c81e7a5a901b5d4f48330e021ea5 I'm Seunghun Han, and I work for National Security Research Institute of South Korea. I have been doing a research on ACPI and found an ACPI cache leak in ACPI early abort cases. Boot log of ACPI cache leak is as follows: [ 0.352414] ACPI: Added _OSI(Module Device) [ 0.353182] ACPI: Added _OSI(Processor Device) [ 0.353182] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.353182] ACPI: Added _OSI(Processor Aggregator Device) [ 0.356028] ACPI: Unable to start the

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  17. CVE-2025-38337

    Moyenne · CVSS 5.5EPSS 0,2%Aucun correctif publié

    jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata()

    In the Linux kernel, the following vulnerability has been resolved: jbd2: fix data-race and null-ptr-deref in jbd2_journal_dirty_metadata() Since handle->h_transaction may be a NULL pointer, so we should change it to call is_handle_aborted(handle) first before dereferencing it. And the following data-race was reported in my fuzzer: ================================================================== BUG: KCSAN: data-race in jbd2_journal_dirty_metadata / jbd2_journal_dirty_metadata write to 0xffff888011024104 of 4 bytes by task 10881 on cpu 1: jbd2_journal_dirty_metadata+0x2a5/0x770 fs/jbd2/transaction.c:1556 __ext4_handle_dirty_metadata+

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  18. CVE-2025-38336

    Moyenne · CVSS 5.7EPSS 0,2%Aucun correctif publié

    ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330

    In the Linux kernel, the following vulnerability has been resolved: ata: pata_via: Force PIO for ATAPI devices on VT6415/VT6330 The controller has a hardware bug that can hard hang the system when doing ATAPI DMAs without any trace of what happened. Depending on the device attached, it can also prevent the system from booting. In this case, the system hangs when reading the ATIP from optical media with cdrecord -vvv -atip on an _NEC DVD_RW ND-4571A 1-01 and an Optiarc DVD RW AD-7200A 1.06 attached to an ASRock 990FX Extreme 4, running at UDMA/33. The issue can be reproduced by running the same command with a cygwin build of cdrecord on Wi

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  19. CVE-2025-38333

    Élevée · CVSS 7.8EPSS 0,18%Aucun correctif publié

    f2fs: fix to bail out in get_new_segment()

    In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to bail out in get_new_segment() ------------[ cut here ]------------ WARNING: CPU: 3 PID: 579 at fs/f2fs/segment.c:2832 new_curseg+0x5e8/0x6dc pc : new_curseg+0x5e8/0x6dc Call trace: new_curseg+0x5e8/0x6dc f2fs_allocate_data_block+0xa54/0xe28 do_write_page+0x6c/0x194 f2fs_do_write_node_page+0x38/0x78 __write_node_page+0x248/0x6d4 f2fs_sync_node_pages+0x524/0x72c f2fs_write_checkpoint+0x4bc/0x9b0 __checkpoint_and_complete_reqs+0x80/0x244 issue_checkpoint_thread+0x8c/0xec kthread+0x114/0x1bc ret_from_fork+0x10/0x20 get_new_segment() detects inconsistent

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

  20. CVE-2025-38328

    Moyenne · CVSS 5.7EPSS 0,22%Aucun correctif publié

    jffs2: check jffs2_prealloc_raw_node_refs() result in few other places

    In the Linux kernel, the following vulnerability has been resolved: jffs2: check jffs2_prealloc_raw_node_refs() result in few other places Fuzzing hit another invalid pointer dereference due to the lack of checking whether jffs2_prealloc_raw_node_refs() completed successfully. Subsequent logic implies that the node refs have been allocated. Handle that. The code is ready for propagating the error upwards. KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 1 PID: 5835 Comm: syz-executor145 Not tainted 5.10.234-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 RIP: 0010:jff

    linux-fipsSystèmes d’exploitation
    Publication Mise à jour
    Avis original 1 ↗Avis original 2 ↗Avis original 3 ↗

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →