hwmon: (gpio-fan) Fix use-after-free in alarm work
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (gpio-fan) Fix use-after-free in alarm work
fan_alarm_irq_handler() queues fan_data->alarm_work, but nothing
cancels it. fan_alarm_notify() dereferences fan_data and its hwmon
device. On unbind, devres frees the interrupt, which only waits for
the handler itself, and then releases the hwmon device and fan_data,
so a pending fan_alarm_notify() can run after those frees.
Replace INIT_WORK() with devm_work_autocancel(), registered before
devm_request_irq(). The devres cleanup then frees the interrupt
first, so no new work can be queued, and cancels the work while
fa
bnxt_en: Propagate RX ring init failures in bnxt_init_nic()
In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Propagate RX ring init failures in bnxt_init_nic()
bnxt_init_rx_rings() returns an error when bnxt_alloc_one_rx_ring()
fails, but bnxt_init_nic() discards that return value and calls
bnxt_init_chip(), which enables TPA.
If an allocation fails, this could leave rxr->rx_tpa[] partially zeroed
and TPA would be enabled over an array with zeroed entries. This would
lead to a zeroed DMA address being handed out if the agg_idx is
translated to a SW index at a zeroed entry.
Fix this by propagating the error out of bnxt_init_nic(). Both callers
already check its return va
smb: client: reject short READ responses in CIFSSMBRead()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject short READ responses in CIFSSMBRead()
CIFSSMBRead() reads DataLengthHigh, DataLength and DataOffset out of
the READ_RSP returned by the server without first checking that a
whole READ_RSP was actually received. The length of the response is
recorded in rsp_iov.iov_len, but nothing constrains it to be at least
read_rsp_size before those fields are dereferenced.
A malicious or compromised SMB1 server can return a response shorter
than the READ_RSP header, so that parsing the header itself reads past
the end of the receive buffer. SMB1 is not negotiated by
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject userspace cifs.idmap descriptions
cifs.idmap key descriptions carry authority-bearing fields (owner and
group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the
cifs.idmap upcall helper treats as kernel-originating inputs. Unlike
its sibling cifs.spnego, the cifs.idmap key type has no vet_description
hook, so userspace can create keys of this type through
request_key(2)/add_key(2) and supply those fields without CIFS origin.
A request_key(2) call with a non-NULL callout then drives a root
usermodehelper upcall (/sbin/request-key -> cifs.i
smb: client: reject out-of-bounds DataOffset in CIFSSMBRead()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: reject out-of-bounds DataOffset in CIFSSMBRead()
The SMB1 synchronous read helper CIFSSMBRead() validates the server's
DataLength against CIFSMaxBufSize and the caller's count, but never
validates DataOffset. The copy source is formed as
&pSMBr->hdr.Protocol + le16_to_cpu(pSMBr->DataOffset)
and memcpy()'d for DataLength bytes with no check that the
[DataOffset, DataOffset + DataLength) range lies within the response
actually received from the server.
A malicious or compromised SMB1 server can return a response carrying
an in-range DataLength and a large Dat
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
In the Linux kernel, the following vulnerability has been resolved:
smb: client: honor forceuid/forcegid when mapping SIDs to uid/gid
When the administrator mounts with forceuid or forcegid (uid=/gid=
mount options), they expect all files to appear owned by the specified
user/group. However, several code paths unconditionally called
sid_to_id() to overwrite cf_uid/cf_gid with server-provided values,
ignoring the administrator's explicit override:
- smb311_posix_info_to_fattr() (stat via POSIX extensions)
- cifs_posix_to_fattr() (readdir via POSIX extensions)
- parse_sec_desc() (CIFS ACL ownership mapping)
This allowed an untrusted
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid leaking refcount in cifs_queue_oplock_break()
cifs_queue_oplock_break() unconditionally takes a reference on the
target file before queueing cifs_oplock_break(). Only that work item
decreases the reference counter again.
If another oplock break arrives while that work is still queued,
queue_work() will return false and not queue this second work item. As a
result, we will never reach the point to drop the file reference again
and are leaking this reference. This can be triggered when interacting
with a slow-responding server.
As a result, later unmount
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: avoid using uninitialized SIDs in cifs_posix_to_fattr()
cifs_posix_to_fattr() ignores the return value of posix_info_parse().
When a malformed POSIX directory entry is encountered (e.g. invalid
SID lengths from an untrusted server), posix_info_parse() returns -1
without populating the 'parsed' struct. The uninitialized stack
memory in parsed.owner and parsed.group is then passed to
sid_to_id(), which processes the garbage bytes and passes them to
request_key() to construct a SID string, potentially leaking kernel
stack contents to the userspace idmap daemon.
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k_htc: don't store usb_device_id
usb_device_id is not guaranteed to live longer than probe due to presence
of dynamic ID. All information apart from driver_data can be easily
retrieved from usb_device, so just store driver_data.
net: usb: pegasus: don't rely on id table pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
net: usb: pegasus: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. Instead of
keeping a side table for additional information, use driver_info field of
the usb_device_id.
The dynamic ID parsing code needs to be updated for this; convert it to
just write to the reserved entry for dynamic ID and remove the weird loop.
usb: xusbatm: don't rely on id table pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
usb: xusbatm: don't rely on id table pointer arithmetic
The current code is broken when dynamic ID is involved; in such cases
usb_device_id parameter of probe lives on the heap and the pointer
arithmetic will get an index that is wildly out of bound. xusbatm
initialize the USB device IDs dynamically so it can just use driver_info
too.
Even with conversion, xusbatm still cannot support dynamic IDs, so also set
no_dynamic_id.
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix queue teardown NULL dma_free and bitmap locking
qla25xx_free_req_que() and qla25xx_free_rsp_que() have two pre-existing
bugs exposed on the error path of qla25xx_create_{req,rsp}_que():
1. When dma_alloc_coherent() fails during queue creation, the error
path calls the free function with req->ring / rsp->ring still NULL
(from kzalloc). The unconditional dma_free_coherent() with a NULL
cpu_addr is undefined behavior and can panic.
2. The free functions clear req_qid_map / rsp_qid_map under vport_lock,
but the create functions protect th
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix use-after-free of qpair work on queue teardown
The response queue MSI-X handler qla2xxx_msix_rsp_q() schedules
qla_do_work() via queue_work(ha->wq, &qpair->q_work). qla_do_work()
dereferences the qpair (vha, rsp) and takes qpair->qp_lock.
During teardown, qla2xxx_delete_qpair() deletes the response queue, which
calls free_irq() in qla25xx_free_rsp_que(), and then frees the queue and
the qpair. free_irq() waits for running hardirq handlers but does not
cancel work already placed on ha->wq. A still-pending q_work then runs
qla_do_work() against the freed q
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Null out freed pointers in qla2x00_mem_alloc() error path
When qla2x00_mem_alloc() fails, qla2x00_probe_one() jumps to
probe_hw_failed and calls qla2x00_mem_free(). Several error labels in
qla2x00_mem_alloc() freed adapter members (elsrej.c, purex_dma_pool,
flt, sfp_data, loop_id_map, async_pd, sf_init_cb, ex_init_cb, npiv_info)
but left the pointers dangling. qla2x00_mem_free() then freed them a
second time. Worse, for the dma_pool members it issued
dma_pool_free(ha->s_dma_pool, ...) after s_dma_pool had already been
destroyed and set to NULL at fail_s_dma_p
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Skip vport under deletion in report ID acquisition
qla24xx_report_id_acquisition() format-1 handling walks ha->vp_list under
vport_slock, takes a vref_count on the matching vport and calls
qla_update_host_map() to register its port id.
A vport teardown via qla24xx_vport_delete() sets VPORT_DELETE, then
qla24xx_disable_vp() removes the vport from the host_map btree and zeroes
vha->d_id (RESET_AL_PA). The vport is only unlinked from vp_list later,
in qla24xx_deallocate_vp_id(), which clears vp_map[idx] (RESET_VP_IDX)
but does not touch host_map. In the window
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Validate BSG request_len before reading vendor_cmd[]
The FC BSG transport allocates job->request via memdup_user() using the
exact user-supplied request_len. For FC_BSG_HST_VENDOR,
fc_bsg_host_dispatch() only guarantees request_len covers msgcode and
vendor_id; it does not account for the vendor_cmd[] flexible array.
qla2xxx then reads the command selector vendor_cmd[0] and, in several
sub-handlers, vendor_cmd[1]/[2] or structures overlaid on the vendor
command area without verifying request_len. A caller holding
CAP_SYS_RAWIO can submit a short request whos
In the Linux kernel, the following vulnerability has been resolved:
gfs2: fix quota init duplicate scan
gfs2_quota_init() checks for duplicate quota_change IDs while holding
qd_lock and the quota hash bucket bitlock. That path used
gfs2_qd_search_bucket(), which takes a lockref reference via
lockref_get_not_dead().
On PREEMPT_RT this may sleep, which is not allowed under the bucket
bitlock, triggering "sleeping function called from invalid context".
Use a no-ref bucket lookup in this path, then continue duplicate
handling without taking a lockref there.
Refactor gfs2_qd_search_bucket() to build on top of the no-ref helper
so lookup trave
In the Linux kernel, the following vulnerability has been resolved:
gfs2: move quota_init qc iterator increment
Move qc++ from the loop body into the for-loop increment
expression in gfs2_quota_init().
This keeps iterator progression explicit and avoids mixing pointer
advance with duplicate-slot handling in the loop body.
drm/xe: Fix null pointer dereference in devcoredump cleanup
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix null pointer dereference in devcoredump cleanup
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured.
wifi: cfg80211: reject duplicate wiphy cipher suite entries
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: reject duplicate wiphy cipher suite entries
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place an