RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, s
ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults
In the Linux kernel, the following vulnerability has been resolved:
ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults
When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set,
a user fault may trigger show_pte() without any lock.
If another thread in the same process concurrently calls munmap(),
the page table pages may be freed while show_pte() is still traversing
them, causing a use-after-free in show_pte().
If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table
of PMD are freed when show_pte() is running.
Acquire mmap_write_lock() around show_pte() for user faults to fix the
contention.
For
ocfs2: synchronize heartbeat callbacks with o2net teardown
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: synchronize heartbeat callbacks with o2net teardown
Patch series "ocfs2: harden heartbeat teardown races".
This series fixes two OCFS2 heartbeat/o2net teardown races found by
KASAN.
This patch (of 2):
Heartbeat callbacks stay registered while configfs local-node teardown
enters o2net_stop_listening(). A node-down event can still run through
o2net_disconnect_node() and o2net_set_nn_state() while teardown is
destroying o2net_wq, so the later queue/flush operations can hit a dead
workqueue. KASAN has caught this as a slab-use-after-free in
__queue_work() with the
ocfs2: o2hb: quiesce negotiate handlers and timeout work
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: o2hb: quiesce negotiate handlers and timeout work
Heartbeat regions publish struct o2hb_region as the private data for the
NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item()
creates the configfs region. The approve handler can call
o2hb_arm_timeout(), so a peer can touch the region timeout work before
dev_store() has finished building the heartbeat runtime, or after teardown
has started to shut that runtime back down.
The final configfs put also has to keep reg alive until the last in-flight
o2net callback drops its handler reference.
o2net_unregi
In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: tcon: Drop TCON TOP device reference
of_find_device_by_node() takes a device reference. Drop it after mux
configuration succeeds.
In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: crtc: Propagate layer initialization error
sun4i_crtc_init() returns plain NULL when layer initialization fails,
while all its other error paths return an error pointer. The only
caller, sun4i_tcon_bind(), checks the result with IS_ERR() and happily
continues with tcon->crtc set to NULL. sun4i_rgb_init() and
sun4i_lvds_init() then dereference it in drm_crtc_mask(), which
oopses.
Return the error pointer instead.
cpufreq: imx6q: fix devres accumulation across driver rebind
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix devres accumulation across driver rebind
imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev
is the CPU device from get_cpu_device(0). That device is never unbound, so
its devres list is never released, and imx6q_cpufreq_remove() does not free
the array either. Every probe therefore adds an allocation that stays for
the lifetime of the system.
Allocate against the platform device instead. Its devres is released when
the driver is unbound, which is exactly the lifetime the array wants:
imx6q_set_target() reads it, and nothing may re
cpufreq: imx6q: fix out-of-bounds write when probed more than once
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix out-of-bounds write when probed more than once
imx6_soc_volt is allocated fresh on every probe, sized to the number of
ARM OPPs:
imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
GFP_KERNEL);
but it is filled through soc_opp_count, which has static storage and is
never reset. A second bind after an unbind keeps indexing from where the
first one stopped, and writes past the end of the new array.
Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN:
BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3
IB/isert: delay the final Login Response until the session is registered
In the Linux kernel, the following vulnerability has been resolved:
IB/isert: delay the final Login Response until the session is registered
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
K
IB/isert: post the full-feature receive buffers after session registration
In the Linux kernel, the following vulnerability has been resolved:
IB/isert: post the full-feature receive buffers after session registration
isert_put_login_tx() posts the full-feature receive buffers before
__transport_register_session() runs, so an initiator that does not wait
for the final Login Response can still have a SCSI command executed
against an se_session whose se_tpg is NULL - the same oops as the
previous patch, at target_submit+0xbe.
Post them from isert_get_rx_pdu(), which the previous patch already uses
to send that response, and post them before that send: the receive queue
is filled at the moment the initiator is told
In the Linux kernel, the following vulnerability has been resolved:
RDMA/siw: Fix use-after-free in siw_accept()
siw_accept() looks up the QP supplied by userspace. If that QP is
already in RTS, the function jumps to error cleanup before associating
the incoming CEP with it.
The cleanup tests whether qp->cep is non-NULL and assumes the current
call installed the association. However, qp->cep can point to the CEP
of an existing connection. The cleanup then drops a reference from the
incoming cep, not qp->cep. Once the incoming endpoint loses its
remaining references, this can free it before the subsequent cep->qp
store, causing a use-after-
drm/amdgpu/gfx6: Use PFP on the compute queues too
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx6: Use PFP on the compute queues too
On GFX6, the compute rings use the same CP path as
the graphics ring. The only difference is that they
don't support draw commands. (As opposed to GFX7 and
newer which have a separate command parser that is
called MEC for compute queues.)
This means that we have to take into consideration
that the PFP also exists on compute queues on GFX6:
Use PFP for register writes on both graphics and
compute queues.
In the pipeline sync, use the PFP to wait for the
previous fence (and not the ME) to prevent the PFP
from starting to e
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Remove redundant VPD flash read in sysfs read path
qla2x00_sysfs_read_vpd() called ha->isp_ops->read_optrom() a second time
after releasing optrom_mutex. The repeated read is redundant and, unlike
the first, runs without optrom_mutex held, exposing flash access to
concurrent optrom operations. Drop the duplicate call.
In the Linux kernel, the following vulnerability has been resolved:
hugetlbfs: release subpool on fill_super failure
hugetlbfs_fill_super() allocates a hugepage subpool when size or min_size
mount options are specified. hugepage_new_subpool() may also reserve huge
pages for min_size.
If root dentry creation fails after the subpool is created, the failure
path frees the subpool with kfree(). This bypasses hugepage_put_subpool()
and can leave min_size reservations charged.
Use hugepage_put_subpool() on the failure path, matching the normal
put_super path.
coresight: etm4x: fix underflow for usage of (nrseqstate - 1)
In the Linux kernel, the following vulnerability has been resolved:
coresight: etm4x: fix underflow for usage of (nrseqstate - 1)
According to IHI006H Embedded Trace Macrocell Architecture
Specification[0], TRCSEQEVR<n> is implemented only when
TRCIDR5.NUMSEQSTATE is 0b100, in which case n ranges from 0 to 2;
otherwise, TRCIDR5.NUMSEQSTATE is 0b000.
IOW, the number of usage in the initialisation or setting
TRCSEQEVR<n> with drvdata->nrseqstate - 1 in the loop could make
underflow issue when TRCIDR5.NUMSEQSTATE is 0b000.
Therefore, introduce nr_seq_ctrls field and untie it from nrseqstate.
As part of this introduce ETM_MAX_SEQ_TRANSITIONS
scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails
In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix special_vec mempool leak when scsi_alloc_sgtables() fails
sd_set_special_bvec() allocates a special payload page for UNMAP and
WRITE SAME commands. If scsi_alloc_sgtables() fails afterward in
sd_setup_unmap_cmnd() or sd_setup_write_same{10,16}_cmnd(), the SCSI
midlayer does not call uninit_command() because RQF_DONTPREP is not set
yet, leaking the page.
Call sd_uninit_command() on error, and clear RQF_SPECIAL_PAYLOAD after
freeing the page.
btrfs: check if root is readonly when setting posix acl
In the Linux kernel, the following vulnerability has been resolved:
btrfs: check if root is readonly when setting posix acl
For a filesystem which has btrfs read-only property set to true, all
write operations including acl and xattr should be denied. However, acl
can still be set even if btrfs ro property is true.
This happens because no function on the set_acl code path checks the root
is readonly or not. It was checked in btrfs_setxattr_trans() but got
removed in commit 353c2ea735e4 ("btrfs: remove redundant readonly root
check in btrfs_setxattr_trans")
That commit didn't check if all the callers properly check the root's
read-only fla
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In the Linux kernel, the following vulnerability has been resolved:
btrfs: qgroup: fix a wrong length calculation in qgroup_free_reserved_data()
In that function, we round down the start position and round up the
ending position.
But during the calculation of @len, we use "round_up(start + len,
sectorsize)", which is the rounded up end position, not the rounded up
length.
Which results a much larger length, and later we are still using
"start + len", which is completely incorrect.
Fix it by declaring a local @aligned_start and @aligned_len and use them
instead.
net/sched: cls_api: fix teardown of an adopted proto on insert-race loss
In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: fix teardown of an adopted proto on insert-race loss
In tc_new_tfilter() the create branch sets tp_created = 1 before calling
tcf_chain_tp_insert_unique(). When the caller loses the race (another
request inserted a proto at the same chain/prio first), insert_unique()
destroys the caller's own tp_new and returns the winner's proto with an
extra reference. tp_created was never cleared, so the loser's errout
path treated the winner's live proto as its own and called
tcf_chain_tp_delete_empty() on it, silently unlinking an active
classifier that the winning
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix mmap_lock leak in irq_work path
stack_map_get_build_id_offset() introduced a per-CPU irq_work to defer
mmap_read_unlock() from NMI context, and bpf_find_vma() later reused the
same mmap_unlock_work. Both callers only check whether the work is busy
before taking mmap_lock, so a nested caller can reuse the slot before the
first caller queues it. Two read locks may then be acquired while only one
deferred unlock runs, leaking a read lock and blocking exit_mmap().
Reserve the per-CPU slot before mmap_read_trylock(). Use the same wrapper
in stackmap and bpf_find_vma()