p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-fips · Page n° 168

Vulnérabilités publiées pour linux-fips au cours des 30 derniers jours : 332. Présentes dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 5472

  1. CVE-2022-49589

    Moyenne · CVSS 4.7EPSS 0,19%Aucun correctif publié

    igmp: Fix data-races around sysctl_igmp_qrv.

    In the Linux kernel, the following vulnerability has been resolved: igmp: Fix data-races around sysctl_igmp_qrv. While reading sysctl_igmp_qrv, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. This test can be packed into a helper, so such changes will be in the follow-up series after net is merged into net-next. qrv ?: READ_ONCE(net->ipv4.sysctl_igmp_qrv);

    Publication Mise à jour
  2. CVE-2022-49587

    Moyenne · CVSS 4.7EPSS 0,19%Aucun correctif publié

    tcp: Fix a data-race around sysctl_tcp_notsent_lowat.

    In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_notsent_lowat. While reading sysctl_tcp_notsent_lowat, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

    Publication Mise à jour
  3. CVE-2022-49584

    Moyenne · CVSS 5.5EPSS 0,2%Aucun correctif publié

    ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero

    In the Linux kernel, the following vulnerability has been resolved: ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00

    Publication Mise à jour
  4. CVE-2022-49581

    Élevée · CVSS 7.8EPSS 0,31%Aucun correctif publié

    be2net: Fix buffer overflow in be_get_module_eeprom

    In the Linux kernel, the following vulnerability has been resolved: be2net: Fix buffer overflow in be_get_module_eeprom be_cmd_read_port_transceiver_data assumes that it is given a buffer that is at least PAGE_DATA_LEN long, or twice that if the module supports SFF 8472. However, this is not always the case. Fix this by passing the desired offset and length to be_cmd_read_port_transceiver_data so that we only copy the bytes once.

    Publication Mise à jour
  5. CVE-2022-49575

    Moyenne · CVSS 4.7EPSS 0,19%Aucun correctif publié

    tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts.

    In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts. While reading sysctl_tcp_thin_linear_timeouts, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

    Publication Mise à jour
  6. CVE-2022-49573

    Moyenne · CVSS 4.7EPSS 0,19%Aucun correctif publié

    tcp: Fix a data-race around sysctl_tcp_early_retrans.

    In the Linux kernel, the following vulnerability has been resolved: tcp: Fix a data-race around sysctl_tcp_early_retrans. While reading sysctl_tcp_early_retrans, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader.

    Publication Mise à jour
  7. CVE-2022-49572

    Moyenne · CVSS 4.7EPSS 0,19%Aucun correctif publié

    tcp: Fix data-races around sysctl_tcp_slow_start_after_idle.

    In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_slow_start_after_idle. While reading sysctl_tcp_slow_start_after_idle, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

    Publication Mise à jour
  8. CVE-2022-49571

    Moyenne · CVSS 4.7EPSS 0,19%Aucun correctif publié

    tcp: Fix data-races around sysctl_tcp_max_reordering.

    In the Linux kernel, the following vulnerability has been resolved: tcp: Fix data-races around sysctl_tcp_max_reordering. While reading sysctl_tcp_max_reordering, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers.

    Publication Mise à jour
  9. CVE-2022-49568

    Moyenne · CVSS 5.5EPSS 0,3%Aucun correctif publié

    KVM: Don't null dereference ops->destroy

    In the Linux kernel, the following vulnerability has been resolved: KVM: Don't null dereference ops->destroy A KVM device cleanup happens in either of two callbacks: 1) destroy() which is called when the VM is being destroyed; 2) release() which is called when a device fd is closed. Most KVM devices use 1) but Book3s's interrupt controller KVM devices (XICS, XIVE, XIVE-native) use 2) as they need to close and reopen during the machine execution. The error handling in kvm_ioctl_create_device() assumes destroy() is always defined which leads to NULL dereference as discovered by Syzkaller. This adds a checks for destroy!=NULL and adds a miss

    Publication Mise à jour
  10. CVE-2022-49563

    Élevée · CVSS 7.8EPSS 0,29%Aucun correctif publié

    crypto: qat - add param check for RSA

    In the Linux kernel, the following vulnerability has been resolved: crypto: qat - add param check for RSA Reject requests with a source buffer that is bigger than the size of the key. This is to prevent a possible integer underflow that might happen when copying the source scatterlist into a linear buffer.

    Publication Mise à jour
  11. CVE-2022-49555

    Élevée · CVSS 7.8EPSS 0,27%Aucun correctif publié

    Bluetooth: hci_qca: Use del_timer_sync() before freeing

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Use del_timer_sync() before freeing While looking at a crash report on a timer list being corrupted, which usually happens when a timer is freed while still active. This is commonly triggered by code calling del_timer() instead of del_timer_sync() just before freeing. One possible culprit is the hci_qca driver, which does exactly that. Eric mentioned that wake_retrans_timer could be rearmed via the work queue, so also move the destruction of the work queue before del_timer_sync().

    Publication Mise à jour
  12. CVE-2022-49546

    Moyenne · CVSS 5.5EPSS 0,28%Aucun correctif publié

    x86/kexec: fix memory leak of elf header buffer

    In the Linux kernel, the following vulnerability has been resolved: x86/kexec: fix memory leak of elf header buffer This is reported by kmemleak detector: unreferenced object 0xffffc900002a9000 (size 4096): comm "kexec", pid 14950, jiffies 4295110793 (age 373.951s) hex dump (first 32 bytes): 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 .ELF............ 04 00 3e 00 01 00 00 00 00 00 00 00 00 00 00 00 ..>............. backtrace: [<0000000016a8ef9f>] __vmalloc_node_range+0x101/0x170 [<000000002b66b6c0>] __vmalloc_node+0xb4/0x160 [<00000000ad40107d>] crash_prepare_elf64_headers+0x8e/0xcd0 [<0000000019afff23>]

    Publication Mise à jour
  13. CVE-2022-49545

    Élevée · CVSS 7.8EPSS 0,28%Aucun correctif publié

    ALSA: usb-audio: Cancel pending work at closing a MIDI substream

    In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Cancel pending work at closing a MIDI substream At closing a USB MIDI output substream, there might be still a pending work, which would eventually access the rawmidi runtime object that is being released. For fixing the race, make sure to cancel the pending work at closing.

    Publication Mise à jour
  14. CVE-2022-49538

    Moyenne · CVSS 5.5EPSS 0,27%Aucun correctif publié

    ALSA: jack: Access input_dev under mutex

    In the Linux kernel, the following vulnerability has been resolved: ALSA: jack: Access input_dev under mutex It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock.

    Publication Mise à jour
  15. CVE-2022-49534

    Moyenne · CVSS 5.5EPSS 0,23%Aucun correctif publié

    scsi: lpfc: Protect memory leak for NPIV ports sending PLOGI_RJT

    In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Protect memory leak for NPIV ports sending PLOGI_RJT There is a potential memory leak in lpfc_ignore_els_cmpl() and lpfc_els_rsp_reject() that was allocated from NPIV PLOGI_RJT (lpfc_rcv_plogi()'s login_mbox). Check if cmdiocb->context_un.mbox was allocated in lpfc_ignore_els_cmpl(), and then free it back to phba->mbox_mem_pool along with mbox->ctx_buf for service parameters. For lpfc_els_rsp_reject() failure, free both the ctx_buf for service parameters and the login_mbox.

    Publication Mise à jour
  16. CVE-2022-49532

    Moyenne · CVSS 5.5EPSS 0,32%Aucun correctif publié

    drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

    In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes drm_cvt_mode may return NULL and we should check it. This bug is found by syzkaller: FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418

    Publication Mise à jour
  17. CVE-2022-49531

    Élevée · CVSS 7.8EPSS 0,18%Aucun correctif publié

    loop: implement ->free_disk

    In the Linux kernel, the following vulnerability has been resolved: loop: implement ->free_disk Ensure that the lo_device which is stored in the gendisk private data is valid until the gendisk is freed. Currently the loop driver uses a lot of effort to make sure a device is not freed when it is still in use, but to to fix a potential deadlock this will be relaxed a bit soon.

    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →