p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-fips · Page n° 93

Vulnérabilités publiées pour linux-fips au cours des 30 derniers jours : 321. Présentes dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 5485

  1. CVE-2026-43156

    Moyenne · CVSS 5.5EPSS 0,12%Aucun correctif publié

    net: usb: pegasus: enable basic endpoint checking

    In the Linux kernel, the following vulnerability has been resolved: net: usb: pegasus: enable basic endpoint checking pegasus_probe() fills URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_rcvbulkpipe(dev, 1) for RX data - usb_sndbulkpipe(dev, 2) for TX data - usb_rcvintpipe(dev, 3) for status interrupts A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a pegasus_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls before any resource allocation

    Publication Mise à jour
  2. CVE-2026-43141

    Élevée · CVSS 7.1EPSS 0,13%Aucun correctif publié

    ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut

    In the Linux kernel, the following vulnerability has been resolved: ntb: ntb_hw_switchtec: Fix shift-out-of-bounds for 0 mw lut Number of MW LUTs depends on NTB configuration and can be set to zero, in such scenario rounddown_pow_of_two will cause undefined behaviour and should not be performed. This patch ensures that rounddown_pow_of_two is called on valid value.

    Publication Mise à jour
  3. CVE-2026-43140

    Moyenne · CVSS 5.5EPSS 0,13%Aucun correctif publié

    HID: magicmouse: Do not crash on missing msc->input

    In the Linux kernel, the following vulnerability has been resolved: HID: magicmouse: Do not crash on missing msc->input Fake USB devices can send their own report descriptors for which the input_mapping() hook does not get called. In this case, msc->input stays NULL, leading to a crash at a later time. Detect this condition in the input_configured() hook and reject the device. This is not supposed to happen with actual magic mouse devices, but can be provoked by imposing as a magic mouse USB device.

    Publication Mise à jour
  4. CVE-2026-43139

    Élevée · CVSS 8.6EPSS 0,38%Aucun correctif publié

    xfrm6: fix uninitialized saddr in xfrm6_get_saddr()

    In the Linux kernel, the following vulnerability has been resolved: xfrm6: fix uninitialized saddr in xfrm6_get_saddr() xfrm6_get_saddr() does not check the return value of ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable source address (returns -EADDRNOTAVAIL), saddr->in6 is left uninitialized, but xfrm6_get_saddr() still returns 0 (success). This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized address in xfrm_state_find(), triggering KMSAN warning: ===================================================== BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940 xfrm_state_find+0x2424/0xa940 xfrm

    Publication Mise à jour
  5. CVE-2026-43136

    Moyenne · CVSS 5.5EPSS 0,13%Aucun correctif publié

    HID: logitech-hidpp: Check maxfield in hidpp_get_report_length()

    In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Check maxfield in hidpp_get_report_length() Do not crash when a report has no fields. Fake USB gadgets can send their own HID report descriptors and can define report structures without valid fields. This can be used to crash the kernel over USB.

    Publication Mise à jour
  6. CVE-2026-43134

    Élevée · CVSS 8.1EPSS 0,12%Aucun correctif publié

    Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ This adds a check for encryption key size upon receiving L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which expects L2CAP_CR_LE_BAD_KEY_SIZE.

    Publication Mise à jour
  7. CVE-2026-43126

    Élevée · CVSS 7.8EPSS 0,16%Aucun correctif publié

    ALSA: mixer: oss: Add card disconnect checkpoints

    In the Linux kernel, the following vulnerability has been resolved: ALSA: mixer: oss: Add card disconnect checkpoints ALSA OSS mixer layer calls the kcontrol ops rather individually, and pending calls might be not always caught at disconnecting the device. For avoiding the potential UAF scenarios, add sanity checks of the card disconnection at each entry point of OSS mixer accesses. The rwsem is taken just before that check, hence the rest context should be covered by that properly.

    Publication Mise à jour
  8. CVE-2026-43124

    Moyenne · CVSS 5.5EPSS 0,13%Aucun correctif publié

    pstore: ram_core: fix incorrect success return when vmap() fails

    In the Linux kernel, the following vulnerability has been resolved: pstore: ram_core: fix incorrect success return when vmap() fails In persistent_ram_vmap(), vmap() may return NULL on failure. If offset is non-zero, adding offset_in_page(start) causes the function to return a non-NULL pointer even though the mapping failed. persistent_ram_buffer_map() therefore incorrectly returns success. Subsequent access to prz->buffer may dereference an invalid address and cause crashes. Add proper NULL checking for vmap() failures.

    Publication Mise à jour
  9. CVE-2026-43123

    Moyenne · CVSS 5.5EPSS 0,13%Aucun correctif publié

    fbcon: check return value of con2fb_acquire_newinfo()

    In the Linux kernel, the following vulnerability has been resolved: fbcon: check return value of con2fb_acquire_newinfo() If fbcon_open() fails when called from con2fb_acquire_newinfo() then info->fbcon_par pointer remains NULL which is later dereferenced. Add check for return value of the function con2fb_acquire_newinfo() to avoid it. Found by Linux Verification Center (linuxtesting.org) with SVACE.

    Publication Mise à jour
  10. CVE-2026-43118

    Moyenne · CVSS 5.5EPSS 0,16%Aucun correctif publié

    btrfs: fix zero size inode with non-zero size after log replay

    In the Linux kernel, the following vulnerability has been resolved: btrfs: fix zero size inode with non-zero size after log replay When logging that an inode exists, as part of logging a new name or logging new dir entries for a directory, we always set the generation of the logged inode item to 0. This is to signal during log replay (in overwrite_item()), that we should not set the i_size since we only logged that an inode exists, so the i_size of the inode in the subvolume tree must be preserved (as when we log new names or that an inode exists, we don't log extents). This works fine except when we have already logged an inode in full mo

    Publication Mise à jour
  11. CVE-2026-43116

    Élevée · CVSS 7.8EPSS 0,1%Aucun correctif publié

    netfilter: ctnetlink: ensure safe access to master conntrack

    In the Linux kernel, the following vulnerability has been resolved: netfilter: ctnetlink: ensure safe access to master conntrack Holding reference on the expectation is not sufficient, the master conntrack object can just go away, making exp->master invalid. To access exp->master safely: - Grab the nf_conntrack_expect_lock, this gets serialized with clean_from_lists() which also holds this lock when the master conntrack goes away. - Hold reference on master conntrack via nf_conntrack_find_get(). Not so easy since the master tuple to look up for the master conntrack is not available in the existing problematic paths. This patch g

    Publication Mise à jour
  12. CVE-2026-43113

    Élevée · CVSS 8.8EPSS 0,24%Aucun correctif publié

    wifi: wl1251: validate packet IDs before indexing tx_frames

    In the Linux kernel, the following vulnerability has been resolved: wifi: wl1251: validate packet IDs before indexing tx_frames wl1251_tx_packet_cb() uses the firmware completion ID directly to index the fixed 16-entry wl->tx_frames[] array. The ID is a raw u8 from the completion block, and the callback does not currently verify that it fits the array before dereferencing it. Reject completion IDs that fall outside wl->tx_frames[] and keep the existing NULL check in the same guard. This keeps the fix local to the trust boundary and avoids touching the rest of the completion flow.

    Publication Mise à jour
  13. CVE-2026-43111

    Élevée · CVSS 7.8EPSS 0,1%Aucun correctif publié

    HID: roccat: fix use-after-free in roccat_report_event

    In the Linux kernel, the following vulnerability has been resolved: HID: roccat: fix use-after-free in roccat_report_event roccat_report_event() iterates over the device->readers list without holding the readers_lock. This allows a concurrent roccat_release() to remove and free a reader while it's still being accessed, leading to a use-after-free. Protect the readers list traversal with the readers_lock mutex.

    Publication Mise à jour
  14. CVE-2026-43110

    Élevée · CVSS 8.8EPSS 0,27%Aucun correctif publié

    wifi: brcmfmac: validate bsscfg indices in IF events

    In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: validate bsscfg indices in IF events brcmf_fweh_handle_if_event() validates the firmware-provided interface index before it touches drvr->iflist[], but it still uses the raw bsscfgidx field as an array index without a matching range check. Reject IF events whose bsscfg index does not fit in drvr->iflist[] before indexing the interface array. [add missing wifi prefix]

    Publication Mise à jour
  15. CVE-2026-43103

    Moyenne · CVSS 5.5EPSS 0,12%Aucun correctif publié

    net: lapbether: handle NETDEV_PRE_TYPE_CHANGE

    In the Linux kernel, the following vulnerability has been resolved: net: lapbether: handle NETDEV_PRE_TYPE_CHANGE lapbeth_data_transmit() expects the underlying device type to be ARPHRD_ETHER. Returning NOTIFY_BAD from lapbeth_device_event() makes sure bonding driver can not break this expectation.

    Publication Mise à jour
  16. CVE-2026-43089

    Moyenne · CVSS 5.5EPSS 0,13%Aucun correctif publié

    xfrm_user: fix info leak in build_mapping()

    In the Linux kernel, the following vulnerability has been resolved: xfrm_user: fix info leak in build_mapping() struct xfrm_usersa_id has a one-byte padding hole after the proto field, which ends up never getting set to zero before copying out to userspace. Fix that up by zeroing out the whole structure before setting individual variables.

    Publication Mise à jour
  17. CVE-2026-43088

    Moyenne · CVSS 5.5EPSS 0,12%Aucun correctif publié

    net: af_key: zero aligned sockaddr tail in PF_KEY exports

    In the Linux kernel, the following vulnerability has been resolved: net: af_key: zero aligned sockaddr tail in PF_KEY exports PF_KEY export paths use `pfkey_sockaddr_size()` when reserving sockaddr payload space, so IPv6 addresses occupy 32 bytes on the wire. However, `pfkey_sockaddr_fill()` initializes only the first 28 bytes of `struct sockaddr_in6`, leaving the final 4 aligned bytes uninitialized. Not every PF_KEY message is affected. The state and policy dump builders already zero the whole message buffer before filling the sockaddr payloads. Keep the fix to the export paths that still append aligned sockaddr payloads with plain `skb_p

    Publication Mise à jour
  18. CVE-2026-43085

    Moyenne · CVSS 5.5EPSS 0,13%Aucun correctif publié

    netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator

    In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_log: initialize nfgenmsg in NLMSG_DONE terminator When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send() appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put() helper only zeroes alignment padding after the payload, not the payload itself, so four bytes of stale kernel heap data are leaked to userspace in the NLMSG_DONE message body. Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes the nfgenmsg payload via nfnl_fill_hdr(),

    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →