svcrdma: Reject inline replies that overflow the pull-up buffer
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject inline replies that overflow the pull-up buffer
An RPC-over-RDMA client can request a reply, such as an NFS READ
payload, without providing a Write list or a Reply chunk to carry
it. When such a reply needs more scatter/gather entries than the
device's Send Queue supports, svc_rdma_pull_up_needed() selects
pull-up and svc_rdma_pull_up_reply_msg() linearizes the whole
reply into sctxt->sc_xprt_buf. That buffer is only sc_max_req_size
bytes, while the reply on this path is bounded only by the client's
request, so svc_rdma_xb_linearize() copies past the end of
svcrdma: Reject Read lists that exceed the page budget
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject Read lists that exceed the page budget
Individual Read segment lengths are validated at decode time, but
nothing prevents a requester from sending multiple segments whose
cumulative length exceeds the rq_pages array budget. When one
segment fills the page array exactly, the runtime guard in
svc_rdma_build_read_segment() is bypassed because len reaches zero.
A subsequent segment then accesses the NULL sentinel slot at
rq_pages[rq_maxpages], resulting in a NULL pointer dereference during
DMA mapping.
Accumulate pages across all Read segments and reject the me
svcrdma: Use svc_xprt_put to free listener on create failure
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Use svc_xprt_put to free listener on create failure
svc_rdma_create() calls kfree(cma_xprt) when
svc_rdma_create_listen_id() fails. svc_xprt_init() has already
acquired a net namespace reference via get_net_track(); kfree
bypasses svc_xprt_free() which releases it.
Replace the kfree() with svc_xprt_put() so the kref_init birth
reference drops to zero and svc_xprt_free() dispatches
svc_rdma_free() to clean up properly. sc_cm_id is still NULL
at that point; the preceding patch added the necessary NULL
guard in svc_rdma_free().
svc_xprt_free() also drops the module
svcrdma: Validate Read chunk positions before reconstruction
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Validate Read chunk positions before reconstruction
The RPC/RDMA Read chunk position field is supplied by the remote
client and stored verbatim in the parsed chunk list.
xdr_count_read_segments() checks only 4-byte alignment; it never
compares the position against the received inline body length.
In the single-chunk path, svc_rdma_read_complete_one() splits the
head and tail kvecs at ch_position. A position past the inline
body underflows the tail length, exposing adjacent slab memory to
the upper XDR decoder.
In the multi-chunk path, svc_rdma_read_multiple_chunk
In the Linux kernel, the following vulnerability has been resolved:
udf: reject VAT indexes equal to the entry count
UDF 1.50 virtual partition mapping uses the VAT as an array of physical
block mappings. s_num_entries stores the number of entries in that array,
not the highest valid index. The valid VAT indexes are therefore below
s_num_entries.
udf_get_pblock_virt15() currently rejects only indexes greater than
s_num_entries. A crafted image can request index s_num_entries, pass the
bounds check, and make the kernel read one entry past the allocated VAT table.
Change the check to reject block >= s_num_entries, so the count is handled as
wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: clamp assoc request/response lengths before subtracting IE offsets
ath6kl_cfg80211_connect_event() subtracts fixed IE offsets from
assoc_req_len (-= 4) and assoc_resp_len (-= 6), both u8, with no lower
bound. The aggregate check recently added to ath6kl_wmi_connect_event_rx()
bounds the declared lengths from above (their sum must fit the received
event), but an assoc request/response shorter than its fixed offset still
underflows here: the u8 wraps to ~250, and cfg80211_connect_result() /
cfg80211_roamed() then treat that wrapped value as the IE length and cop
sched/core: Make core-sched flips wait for in-flight selections
In the Linux kernel, the following vulnerability has been resolved:
sched/core: Make core-sched flips wait for in-flight selections
Core scheduling's pick_next_task() operates on all sibling rqs under one
acquisition of the shared core-wide lock. A ->pick_task() that releases the
rq lock leaves every sibling __lock momentarily free, letting
__sched_core_flip(false) complete mid-selection and rebind rq_lockp() under
it. The selection resumes on the split locks, touching sibling state it no
longer protects, and __schedule() finally releases a lock that was never
taken while leaking the one that was.
Count in-flight core-wide selections in th
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
In the Linux kernel, the following vulnerability has been resolved:
scsi: core: Fill in DMA padding bytes in scsi_alloc_sgtables()
During fuzz testing, the following issue was discovered:
BUG: KMSAN: uninit-value in __dma_map_sg_attrs+0x217/0x310
__dma_map_sg_attrs+0x217/0x310
dma_map_sg_attrs+0x4a/0x70
ata_qc_issue+0x9f8/0x1420
__ata_scsi_queuecmd+0x1657/0x1740
ata_scsi_queuecmd+0x79a/0x920
scsi_queue_rq+0x4472/0x4f40
blk_mq_dispatch_rq_list+0x1cca/0x3ee0
__blk_mq_sched_dispatch_requests+0x458/0x630
blk_mq_sched_dispatch_requests+0x15b/0x340
__blk_mq_run_hw_queue+0xe5/0x250
__blk_mq_delay_run_hw_queue+0x138/0x780
blk_mq_run_hw
remoteproc: scp: Fix device reference leak on failed lookup
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: scp: Fix device reference leak on failed lookup
Make sure to drop the reference taken to the SCP device when attempting
to look up its driver data before the driver has been bound.
Note that holding a reference to a device does not prevent its driver
data from going away.
qede: Fix NULL pointer dereference in TPA fragment processing
In the Linux kernel, the following vulnerability has been resolved:
qede: Fix NULL pointer dereference in TPA fragment processing
Under memory pressure, the qede driver encounters NULL pointer
dereferences when processing TPA continuation fragments.
Commit 8a8633978b84 ("qede: Add build_skb() support.") accidentally
dropped the assignment of tpa_info->buffer.data in qede_tpa_start().
When memory pressure causes an SKB allocation failure in qede_tpa_start(),
the driver sets tpa_start_fail = true and attempts to recycle the physical
page later in qede_tpa_end() via qede_reuse_page(). However, because
buffer.data was left uninitialized (NULL
RDMA/cxgb4: Cancel reg_work before freeing device on remove
In the Linux kernel, the following vulnerability has been resolved:
RDMA/cxgb4: Cancel reg_work before freeing device on remove
c4iw_uld_state_change() queues reg_work to register the RDMA device.
c4iw_remove() can free ctx->dev while this work is pending or running,
leaving c4iw_register_device() accessing the freed device.
Cancel reg_work before removing the device. The registration work can
tear down ctx->dev when registration fails, so do not unregister or
deallocate it again in that case.
This issue was found by an in-house static analysis tool.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/ucma: Lock the handler in ucma_set_ib_path()
ucma_set_ib_path() calls ucma_event_handler() straight from the write()
path, without the handler lock that keeps ctx->file stable while a uevent
is queued. The handler re-reads ctx->file for every dereference:
mutex_lock(&ctx->file->mut); /* file A */
list_add_tail(&uevent->list, &ctx->file->event_list); /* file B */
mutex_unlock(&ctx->file->mut); /* file B */
wake_up_interruptible(&ctx->file->poll_wait); /* file B */
A concurrent ucma_migrate_id() reassigns ctx->file while the SET_OPTION
caller sleeps in mutex_l
In the Linux kernel, the following vulnerability has been resolved:
regulator: as3722_get_regulator_dt_data: fix premature of_node_put leaving dangling of_node pointer
In as3722_get_regulator_dt_data(), of_get_child_by_name() acquires a
reference on np, which is then assigned to pdev->dev.of_node. The
function immediately calls of_node_put(np), releasing the reference and
leaving pdev->dev.of_node as a dangling pointer.
Remove the of_node_put(np) call to let the device hold the reference.
orangefs: fix double-free of trailer_buf on readdir copy failure
In the Linux kernel, the following vulnerability has been resolved:
orangefs: fix double-free of trailer_buf on readdir copy failure
On a readdir downcall, orangefs_devreq_write_iter() frees
op->downcall.trailer_buf with vfree() when copy_from_iter_full() fails,
but does not clear the pointer before goto Efault. The waiter in
do_readdir() is then woken with a negative status and frees the same
pointer again on its r < 0 path, causing a deterministic double-free.
A client holding /dev/pvfs2-req triggers it by sending a readdir
downcall whose declared trailer_size exceeds the bytes it supplies.
Clear the pointer after freeing so the readdir-
orangefs: skip leading spaces before parsing client debug masks
In the Linux kernel, the following vulnerability has been resolved:
orangefs: skip leading spaces before parsing client debug masks
orangefs_prepare_cdm_array() sizes each client debug keyword buffer
with strcspn(cds_head, " "), but then parses the keyword with %s. The
%s conversion skips leading whitespace, while strcspn() does not.
If a client debug entry starts with a space, the allocation can be sized
for an empty keyword while sscanf() copies the following non-empty token.
This can write past the end of the allocated keyword buffer.
Skip leading spaces before computing the keyword length so the allocation
matches the string parsed by
ocfs2: always run deallocs on copy-on-write completion
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: always run deallocs on copy-on-write completion
Local fuzzing of 6.12.94 has found the following memory leak
caused by doing 'copy_file_range()' within the same filesystem:
unreferenced object 0xffff88812192c980 (size 32):
comm "syz.0.49", pid 12095, jiffies 4294964143
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 00 00 00 00 00 00 00 ................
c0 c5 92 21 81 88 ff ff 00 02 00 00 00 06 00 00 ...!............
backtrace (crc 7068d63f):
kmemleak_alloc_recursive include/linux/kmemleak.h:42 [inline]
slab_post_alloc_hook mm/slub.c:41
ocfs2: bound namelen in dlm_migrate_request_handler
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: bound namelen in dlm_migrate_request_handler
Patch series "ocfs2/dlm: bound peer-controlled lengths in the o2dlm".
The o2dlm receive handlers trust u8 length and count fields from the wire
without bounding them, so a node in a DLM domain can corrupt or panic any
other node with a malformed message. Three defects:
- dlm_migrate_request_handler() passes migrate->namelen unchecked to
dlm_init_mle(), which memcpy()s it into the 32-byte mname[] of an
o2dlm_mle slab object: a heap out-of-bounds write of up to ~215
attacker-controlled bytes.
- dlm_mig_lo
ocfs2: validate lengths in dlm_mig_lockres_handler
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate lengths in dlm_mig_lockres_handler
A node receiving a DLM_MIG_LOCKRES message trusts several fields of the
peer-supplied dlm_migratable_lockres without validation. num_locks and
lockname_len are bounded only on the sending side, and the message is
never checked to actually carry num_locks migratable_lock entries. As a
result dlm_process_recovery_data() walks mres->ml[0..num_locks) past the
kmalloc(data_len) copy of the message (an out-of-bounds read that ends in
a BUG_ON panic), and dlm_init_lockres() copies lockname_len bytes into the
fixed 32-byte o2dlm_
ocfs2: validate rl_used against rl_count in refcount block validator
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate rl_used against rl_count in refcount block validator
ocfs2_find_refcount_rec_in_rl() walks the on-disk refcount record array
with:
for (; i < le16_to_cpu(rb->rf_records.rl_used); i++) {
rec = &rb->rf_records.rl_recs[i];
...
rl_recs[] lives in a single metadata block (4096 bytes on the common
configuration), so its real capacity is fixed by
ocfs2_refcount_recs_per_rb(sb) (247 records for a 4K block with the
16-byte ocfs2_refcount_rec). rl_used and rl_count are both read directly
off disk by ocfs2_validate_refcount_block() and are never checked against
ocfs2: validate directory-index entry counts when reading metadata
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate directory-index entry counts when reading metadata
ocfs2_validate_dx_leaf() and ocfs2_validate_dx_root() check the ECC and
signature of an indexed-directory block before it reaches higher-level
callers, but neither validator bounds the ocfs2_dx_entry_list counts
against the capacity of the block that holds them.
ocfs2_dx_dir_search() then walks
for (i = 0; i < le16_to_cpu(entry_list->de_num_used); i++)
dx_entry = &entry_list->de_entries[i];
over de_num_used entries with no bounds check. entry_list is either
dx_leaf->dl_list (from ocfs2_read_dx_leaf) o