p PatchFirst

PatchFirst · Vulnérabilités récentes

Vulnérabilités de linux-raspi-realtime · Page n° 133

Vulnérabilités publiées pour linux-raspi-realtime au cours des 30 derniers jours : 810. Présentes dans le catalogue KEV : 0.

Filtrer les vulnérabilités
Effacer les filtres

Vulnérabilités : 10733

  1. CVE-2026-74537

    Élevée · CVSS 8.8EPSS 0,26%Aucun correctif publié

    Bluetooth: ISO: hold sk properly in iso_conn_ready

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: hold sk properly in iso_conn_ready sk deref in iso_conn_ready must be done either under conn->lock, or holding a refcount, to avoid concurrent close. conn->sk is currently accessed without either: [Task 1] [Task 2] iso_sock_release iso_conn_ready sk = conn->sk lock_sock(sk) conn->sk = NULL lock_sock(sk) release_sock(sk) iso_sock_kill(sk) UAF on sk deref Fix possible UAF by holding sk refcoun

    Publication Mise à jour
  2. CVE-2026-74536

    Non évaluéeEPSS 0,17%Aucun correctif publié

    Bluetooth: ISO: fix leaking sk after socket release

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix leaking sk after socket release iso_sock_kill() tests !sock_flag(sk, SOCK_ZAPPED) || sk->sk_socket || sock_flag(sk, SOCK_DEAD) for early return, but this is always true since sock_orphan(sk) sets SOCK_DEAD, so the sk reference released by socket always leaks, iso_sock_destruct is never called. The socket reference also leaks when __iso_sock_close() does not set SOCK_ZAPPED, since iso_conn_del() does not call iso_sock_kill() after zapping. Fix by replacing SOCK_DEAD by BT_SK_KILLED flag that is not used for something else, and lock_sock to ensure iso_so

    Publication Mise à jour
  3. CVE-2026-74535

    Élevée · CVSS 8.8EPSS 0,24%Aucun correctif publié

    Bluetooth: ISO: avoid deadlocks in iso_sock_timeout

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: avoid deadlocks in iso_sock_timeout iso_sock_timeout() takes lock_sock, so sync disabling the timer while holding that lock may deadlock. iso_sock_timeout() may also run concurrently with iso_conn_del(), which leads to UAF [Task 1] [Task hdev->workqueue] iso_sock_timeout iso_conn_del iso_conn_hold_unless_zero iso_chan_del `------------> iso_conn_put caller frees hcon iso_conn_put iso_conn_free

    Publication Mise à jour
  4. CVE-2026-74534

    Élevée · CVSS 8.8EPSS 0,24%Aucun correctif publié

    Bluetooth: ISO: fix refcounting of iso_conn

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix refcounting of iso_conn iso_conn_del() and iso_chan_del() have a race that results to double-put of iso_conn: [Task hdev->workqueue] [Task 2] iso_conn_del iso_chan_del iso_conn_hold_unless_zero iso_conn_lock iso_conn_lock conn->sk = NULL iso_conn_unlock sk = iso_sock_hold(conn) <---------´ if (!sk) iso_conn_put iso_conn_put iso_conn_put /* UAF */ The extra put for !sk in iso_conn_del() is currently required since failing

    Publication Mise à jour
  5. CVE-2026-74533

    Élevée · CVSS 8.8EPSS 0,24%Aucun correctif publié

    Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix race of kfree vs kref_get_unless_zero hci_conn::iso_data is accessed and modified without lock or RCU. This leads to a race [Task hdev->workqueue] [Task 2] iso_recv iso_conn_put(conn) conn = LOAD hcon->iso_data iso_conn_free(conn) iso_conn_hold_unless_zero(conn) hcon->iso_data = NULL kfree(conn) kref_get_unless_zero(&conn->ref) /* UAF */ and also to races in iso_conn_add() vs. iso_conn_free()

    Publication Mise à jour
  6. CVE-2026-74532

    Non évaluéeEPSS 0,17%Aucun correctif publié

    Bluetooth: btintel: Validate length before parsing diagnostics TLV

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel: Validate length before parsing diagnostics TLV btintel_diagnostics() accesses tlv->val[0] without first validating that the diagnostics VSE is long enough to contain that field, so may cause reading data beyond the received frame. Fix by validating the length before access.

    Publication Mise à jour
  7. CVE-2026-74531

    Élevée · CVSS 8.8EPSS 0,25%Aucun correctif publié

    Bluetooth: hci_conn: hold conn reference in abort_conn_sync()

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_conn: hold conn reference in abort_conn_sync() There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that.

    Publication Mise à jour
  8. CVE-2026-74530

    Élevée · CVSS 8.8EPSS 0,38%Aucun correctif publié

    Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_big_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that. Handle NULL hcon, return 0 + do nothing to match the previous behavior.

    Publication Mise à jour
  9. CVE-2026-74527

    Élevée · CVSS 8.8EPSS 0,18%Aucun correctif publié

    octeontx2-af: Block VFs from clobbering special CGX PKIND state

    In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Block VFs from clobbering special CGX PKIND state PF and VF NIX LFs that share a CGX LMAC reuse the same hardware PKIND programming. When HiGig2 or EDSA parsing is enabled, a VF NIX LF alloc must not reset the LMAC RX PKIND or default TX parse config over the PF setup. Add cgx_get_pkind() and rvu_cgx_is_pkind_config_permitted() so VFs skip cgx_set_pkind(), rvu_npc_set_pkind(), and NIX_AF_LFX_TX_PARSE_CFG updates when the LMAC is using NPC_RX_HIGIG_PKIND or NPC_RX_EDSA_PKIND.

    Publication Mise à jour
  10. CVE-2026-74525

    Non évaluéeEPSS 0,22%Aucun correctif publié

    net: sxgbe: free TX rings on RX allocation failure

    In the Linux kernel, the following vulnerability has been resolved: net: sxgbe: free TX rings on RX allocation failure When RX descriptor ring allocation fails, init_dma_desc_rings() only frees the partially allocated RX rings and returns. The TX rings that were allocated earlier in the same function are leaked. Rearrange error labels to clean up TX rings upon RX failures.

    Publication Mise à jour
  11. CVE-2026-74523

    Élevée · CVSS 7.5EPSS 0,5%Aucun correctif publié

    qede: sync udp_tunnel ports outside qede_lock in the recovery path

    In the Linux kernel, the following vulnerability has been resolved: qede: sync udp_tunnel ports outside qede_lock in the recovery path A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports configured wedges the rtnetlink control plane of the whole machine: NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms [qede_tx_timeout:586(ens6f1)]TX timeout on queue 2! [qede_recovery_handler:2665(ens6f0)]Starting a recovery process The recovery path deadlocks on the driver's own mutex: qede_sp_task rtnl_lock() mutex_lock(&edev->qede_lock) <- taken qede_recovery_handler qede_load udp_tunnel_nic

    Publication Mise à jour
  12. CVE-2026-74522

    Élevée · CVSS 8.8EPSS 0,63%Aucun correctif publié

    ksmbd: fix use-after-free in __close_file_table_ids()

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owne

    Publication Mise à jour
  13. CVE-2026-74521

    Critique · CVSS 9.1EPSS 0,41%Aucun correctif publié

    ksmbd: use memcmp() to compare ClientGUIDs

    In the Linux kernel, the following vulnerability has been resolved: ksmbd: use memcmp() to compare ClientGUIDs ClientGUID is a fixed-size binary value and can contain embedded NUL bytes. strncmp() stops comparing at the first NUL byte, so different ClientGUID values can incorrectly be treated as equal. Use memcmp() in SMB3 multichannel session binding and FSCTL_VALIDATE_NEGOTIATE_INFO to compare all SMB2_CLIENT_GUID_SIZE bytes.

    Publication Mise à jour
  14. CVE-2026-74519

    Élevée · CVSS 7.8EPSS 0,15%Aucun correctif publié

    pinctrl: devicetree: don't free uninitialized dev_name on error path

    In the Linux kernel, the following vulnerability has been resolved: pinctrl: devicetree: don't free uninitialized dev_name on error path dt_remember_or_free_map() duplicates dev_name for each map entry. If kstrdup_const() fails, dt_free_map() frees dev_name in all num_maps entries, including entries that have not been initialized. Some pinctrl drivers, including pinctrl-imx, allocate the map with kmalloc() and leave dev_name for the core to initialize. The untouched entries therefore contain uninitialized data which is passed to kfree_const(). Reproduced on qemu's mcimx6ul-evk (pinctrl-imx) with failslab injection while binding the pinctr

    Publication Mise à jour
  15. CVE-2026-74518

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    mm/hugetlb: fix list corruption in allocate_file_region_entries()

    In the Linux kernel, the following vulnerability has been resolved: mm/hugetlb: fix list corruption in allocate_file_region_entries() allocate_file_region_entries() tops up resv->region_cache with freshly allocated file_region descriptors. The allocation uses GFP_KERNEL, so resv->lock is dropped around it: the new entries are gathered on a stack-local list head, allocated_regions, and spliced into resv->region_cache once the lock is re-acquired. The splice used list_splice(), which moves the entries but does not re-initialize the source head, so allocated_regions is left pointing at an entry that now lives on resv->region_cache. The top-

    Publication Mise à jour
  16. CVE-2026-74516

    Élevée · CVSS 8.2EPSS 0,14%Aucun correctif publié

    KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active

    In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC is fully enabled prior to running L2, and is then inhibited while L2 is active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled, but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of the host's APIC state, send arbitrary interrupts, change task priority, and ultimately trivially DoS the host. E.g. sending a se

    Publication Mise à jour
  17. CVE-2026-74515

    Élevée · CVSS 8.8EPSS 0,13%Aucun correctif publié

    KVM: s390: pci: Reject adapter interrupt forwarding if already enabled

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Reject adapter interrupt forwarding if already enabled The MPCIFC instruction doesn't allow registering adapter interrupts without first unregistering. So reject any request to enable interrupt forwarding if its already enabled for the zPCI device. This also fixes overwriting and thus leaking resources when the ioctl is called multiple times for the same device.

    Publication Mise à jour
  18. CVE-2026-74514

    Non évaluéeEPSS 0,21%Aucun correctif publié

    KVM: s390: pci: Fix memory accounting for pinned/unpinned pages

    In the Linux kernel, the following vulnerability has been resolved: KVM: s390: pci: Fix memory accounting for pinned/unpinned pages The account_mem() and unaccount_mem() functions call get_uid() which increments the reference count of struct user_struct on every invocation. But we don't decrement the count by calling free_uid(). It also accounted/unaccounted the pages against the current->mm. But its possible the unaccount_mem() can be called from a different process context than the one that originally pinned the pages. Let's fix this by storing the pinning process user_struct and mm_struct when accounting for pinned pages, and subsequent

    Publication Mise à jour
  19. CVE-2026-74512

    Élevée · CVSS 7.8EPSS 0,13%Aucun correctif publié

    audit: fix potential use-after-free in audit_del_rule()

    In the Linux kernel, the following vulnerability has been resolved: audit: fix potential use-after-free in audit_del_rule() `audit_del_rule()` destroys `e->rule.exe` via `audit_remove_mark_rule()` before unlinking the rule from RCU-visible filter lists and waiting for a grace period. Concurrent readers in `audit_filter()` and `audit_filter_rules()` still dereference `e->rule.exe`, while the fsnotify mark can be freed on an independent lifetime path. This creates a use-after-free window during rule deletion. Fix this by unlinking the rule from the RCU-visible lists and invoking `synchronize_rcu()` before calling `audit_remove_mark_rule()` (

    Publication Mise à jour
  20. CVE-2026-74510

    Élevée · CVSS 7.8EPSS 0,14%Aucun correctif publié

    Bluetooth: mgmt: fix UAF in pair command cancellation

    In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix UAF in pair command cancellation The pairing completion and authentication failure callbacks look up the pending MGMT_OP_PAIR_DEVICE command by walking hdev->mgmt_pending. The lookup returned a command that was still linked on the shared pending list, without keeping mgmt_pending_lock held for the later dereference and removal. A concurrent MGMT_OP_CANCEL_PAIR_DEVICE request can remove and free the same pending command before the callback uses it. The reverse race is also possible when cancel_pair_device() gets a command from pending_find() and a callb

    Publication Mise à jour

Vérifiez votre serveur

Comparez votre pile et les versions installées aux bases de vulnérabilités actuelles.

Vérifiez votre serveur →