locking/lockdep: Invalidate stale class_cache entries for zapped classes
In the Linux kernel, the following vulnerability has been resolved:
locking/lockdep: Invalidate stale class_cache entries for zapped classes
syzbot reported a lockdep splat hitting DEBUG_LOCKS_WARN_ON(1) in
hlock_class() due to an invalid class_idx:
WARNING: kernel/locking/lockdep.c:238 at __lock_acquire+0x382/0x2cf0 kernel/locking/lockdep.c:5203
Workqueue: wg-crypt-wg0 wg_packet_tx_worker
RIP: 0010:hlock_class kernel/locking/lockdep.c:238 [inline]
RIP: 0010:check_wait_context kernel/locking/lockdep.c:4870 [inline]
RIP: 0010:__lock_acquire+0x389/0x2cf0 kernel/locking/lockdep.c:5203
Call Trace:
<IRQ>
lock_acquire+0x106/0x3
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: x86-android-tablets: hold device reference for secondary fwnode teardown
In gpio_secondary_fwnode_init(), acpi_bus_find_device_by_name() returns a
device reference, but the local dev variable is declared with
__free(put_device), dropping the reference at the end of each iteration.
Meanwhile, devm_add_action_or_reset() saves the dev pointer for
gpio_secondary_unset() without incrementing its reference count, which
could lead to a use-after-free during driver teardown if the device is
released in the interim.
Acquire an explicit device reference with get_device
powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()
In the Linux kernel, the following vulnerability has been resolved:
powerpc: Do not restore KUAP in arch_exit_to_user_mode_prepare()
KUAP means kernel cannot touch user memory unless it explicitly is
enabled. In the kernel it should stay AMR_KUAP_BLOCKED. While returning
to userspace just before RFI, kernel should restore the user AMR value
back.
Looks like GENERIC_ENTRY might be treating arch_exit_to_user_mode_prepare()
as the last architecture step before returning to userspace.
commit bee25f97ad24 ("powerpc: Enable GENERIC_ENTRY feature")
therefore called kuap_user_restore() from that hook. But on PowerPC that
is too early. After irqent
powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit
In the Linux kernel, the following vulnerability has been resolved:
powerpc/entry: Fix irq_soft_mask corruption on replayed interrupt exit
When __replay_soft_interrupts() replays a pending interrupt (e.g.
PACA_IRQ_DEC -> timer_interrupt), it calls the handler directly with a
synthetic pt_regs. The DEFINE_INTERRUPT_HANDLER_ASYNC wrapper around
each handler calls arch_interrupt_async_exit_prepare() on the way out,
which calls arch_interrupt_exit_prepare() -> local_irq_disable() ->
arch_local_irq_disable(), which does:
irq_soft_mask_set(IRQS_DISABLED) /* 0x1 */
This unconditionally overwrites irq_soft_mask with IRQS_DISABLED (0x1),
str
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
In the Linux kernel, the following vulnerability has been resolved:
af_unix: Return immediately when manage_oob() returns NULL for 0-length buffer.
Fahad Alharbi reported that recv(0, MSG_PEEK) triggers busy-wait
in unix_stream_read_generic() if recv() is blocking and the last
skb in the queue is MSG_OOB skb.
In such a situation, TCP returns 0 immediately regardless of
blocking or non-blocking.
Let's follow the behaviour.
net: ipv4: Fix UDP length overflow with PMTU discover and big MTU
In the Linux kernel, the following vulnerability has been resolved:
net: ipv4: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork->base.fragsize to IP_MAX_MTU to avoid a
possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IP_MTU_DISCOVER is set to
IP_PMTUDISC_PROBE, and a large packet is sent over a netdev with an
unusually large MTU.
Steps to reproduce:
1. Set device MTU bigger than IP_MAX_MTU + 20. cork->base.fragsize will
be set to that MTU in ip_setup_cork.
2. Set IP_MTU_DISCOVER to IP_PMTUDISC_PROBE. It lets maxnonfragsize be
set to device MTU (cork->fragsize) in
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: fix tx_handle bounds off-by-one
Valid indices into txq->urbd0s/tfds/bufs are 0..txq->count-1, so
tfd_index == txq->count is already out of range. Change the guard in
btintel_pcie_msix_tx_handle() from '> txq->count' to '>= txq->count'.
This issue was reported by Claude Mythos.
drm/xe: Guard page-fault worker with runtime PM check
In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Guard page-fault worker with runtime PM check
During VM teardown, the VM's runtime PM reference is dropped
asynchronously, allowing the device to autosuspend while stale page
faults belonging to the now-dead VM are still queued. When the
page-fault worker later tries to ack one of these, it calls into
guc_ct_send_locked() on an already-suspended device, tripping:
Assertion `!xe_pm_runtime_suspended(xe)` failed!
WARNING at xe_device.c:1267 xe_device_assert_mem_access+0x11c/0x140 [xe]
A live VM/exec queue always holds a PM reference while it has
outstanding work
x86/amd_node: Avoid divide by zero on virtualized systems
In the Linux kernel, the following vulnerability has been resolved:
x86/amd_node: Avoid divide by zero on virtualized systems
On a virtualized system, the number of nodes does not have a relationship to
the number of roots. A Xen PVH dom0 can calculate roots_per_node as 0, which
crashes with a divide by zero in:
if (count++ % roots_per_node)
because the underlying topology code on Xen ends up making num_nodes
2 and num_roots 1 and the integer division result is 0.
The issue is seen with Xen, but it could affect other systems.
Set roots_per_node to 1 in this case. Print a firmware bug when this is
performed for non-virtualized systems
drm/amdgpu: skip gfx switch_power_profile during GPU reset
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: skip gfx switch_power_profile during GPU reset
During resume from GPU reset, the gfx idle work may invoke switch_power_profile
before the reset completes. This causes the following assert error because the
register access occurs without first releasing the GPU reset semaphore:
[ 1576.768935] CR2: 0000559ea133ead0 CR3: 00000002e6c42000 CR4: 0000000000350ef0
[ 1576.768940] Call Trace:
[ 1576.768944] <TASK>
[ 1576.768953] amdgpu_device_rreg+0x21/0x50 [amdgpu]
[ 1576.769158] smu_msg_v1_send_msg+0x1a4/0x6e0 [amdgpu]
[ 1576.769437] smu_cmn_send_smc_msg_with_param
exec: do_close_on_exec() before taking exec_update_lock
In the Linux kernel, the following vulnerability has been resolved:
exec: do_close_on_exec() before taking exec_update_lock
do_close_on_exec() currently happens while holding the exec_update_lock,
which is used in a lot of places that access process state to
synchronize access checks.
I recently added another such use of exec_update_lock, causing a
regression.
do_close_on_exec() can block waiting for a reply from a filesystem.
That means a hung filesystem can block codepaths that use
exec_update_lock; and it also means that a FUSE filesystem which
attempts to inspect the calling process can deadlock.
To avoid such problems, move do_close_
s390/crypto: Fix skcipher_walk return code handling in aes_s390
In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix skcipher_walk return code handling in aes_s390
The return codes from skcipher_walk_virt() were not properly checked
before entering the processing loops in ecb_aes_crypt() and ctr_aes_crypt().
If skcipher_walk_virt() fails, the walk structure may be in an undefined
state, and attempting to process data could lead to incorrect behavior
or accessing uninitialized memory.
Add proper return code checking to ensure correct handling of the walk
initialization and walk advance and eventually return to the caller
with that return code.
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Use memset_io() to clear QLAFX00 request ring slot
For QLAFX00 the request ring is ioremapped device I/O memory
(ha->iobase + req_que_off), not DMA-coherent RAM, which is why the rest
of the FX00 path accesses it through memcpy_toio() and the wrt_reg_*
helpers. __qla2x00_alloc_iocbs() however zeroed the producer slot with a
plain memset(). On architectures such as ARM64 a regular memset() may
emit unaligned or block-zeroing instructions (e.g. DC ZVA) that are
invalid on Device memory, leading to a synchronous external abort.
Use memset_io() to clear the slot
sched/cache: Decouple sched_cache_group from mm to fix UAF
In the Linux kernel, the following vulnerability has been resolved:
sched/cache: Decouple sched_cache_group from mm to fix UAF
Currently the sched cache grouping is by mm and the scheduling statistics
sched_cache_stat lives in the mm structure. This ties the life cycle
of scheduling stats with mm.
In account_mm_sched(), the scheduling stats are accessed by
task->mm->sc_stat. However, a task may be switching mm on one CPU when
another CPU is running account_mm_sched(), and possibly accessing the
old mm that was freed. This problem was found when running tests with
KASAN by Hyunwoo:
https://lore.kernel.org/lkml/apPb-Dr4nPYuHQOK@v4bel/
bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy()
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix out-of-bounds read of sk_protocol in bpf_sock_destroy()
sk_protocol lives in struct sock, not in struct sock_common. A timewait
or request sock handed to bpf_sock_destroy() by the tcp iterator is
neither, so reading sk->sk_protocol runs past the object:
==================================================================
BUG: KASAN: slab-out-of-bounds in bpf_sock_destroy+0xc7/0xe0
Read of size 2 at addr ffff8881047d11b4 by task test_progs/428
Tainted: [W]=WARN
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xf0
print_report+0xd1/0x630
kasan_report+0xf3/0x130
__asan_re
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL
An LWT_SEG6LOCAL program can invalidate its cached SRH with
bpf_lwt_seg6_adjust_srh() and then call bpf_skb_pull_data(). The latter
may reallocate skb->head, leaving the per-CPU SRH pointer dangling.
Post-program SRH validation then writes through that pointer.
Disallow bpf_skb_pull_data() for LWT_SEG6LOCAL programs so the verifier
rejects this unsafe helper combination. Other LWT program types continue
to expose the helper through lwt_out_func_proto().
bpf: Reject dev-bound-only programs on other devices
In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject dev-bound-only programs on other devices
__bpf_offload_dev_match() falls back to comparing offdev pointers after an
exact netdev mismatch. Bound-only programs normally have NULL offdevs, so
unrelated netdevs compare equal. A bound-only program on an
offload-registered netdev can instead inherit a real offdev and match a
sibling port. With CAP_BPF and CAP_NET_ADMIN, a caller can use
bpf(BPF_LINK_CREATE) with a different target ifindex to run metadata kfuncs
specialized for the bound driver on the target driver's xdp_buff. Running a
veth-bound program on tun reads
veth: manage XDP program pointers during channel resize
In the Linux kernel, the following vulnerability has been resolved:
veth: manage XDP program pointers during channel resize
veth_set_channels() tears down XDP resources for removed RX queues
without clearing rq->xdp_prog. If the program is then detached or
replaced, those queues keep the old pointer after bpf_prog_put().
A later channel increase can re-enable NAPI and run the freed program.
BUG: unable to handle page fault for address: ffffc90000256048
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: veth_xdp_rcv_skb (include/linux/filter.h:779
include/net/xdp.h:696 drivers/net/veth.c:820)
Call Trace:
veth_xd
net/sched: reject IDR error pointers when deleting actions
In the Linux kernel, the following vulnerability has been resolved:
net/sched: reject IDR error pointers when deleting actions
tcf_action_delete() drops the reference held by its lookup before calling
tcf_idr_delete_index() with the saved action index. An unlocked
classifier can remove that action and reserve the same IDR slot with
ERR_PTR(-EBUSY) in between.
tcf_idr_delete_index() only checks the lookup result for NULL. It
therefore treats the reservation as a tc_action and dereferences
tcfa_bindcnt. A hardware execution breakpoint was used to schedule the
interleaving without changing the kernel source. KASAN reported this
decoded tr
netfilter: ip6t_rpfilter: reject routes without inet6_dev
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ip6t_rpfilter: reject routes without inet6_dev
ip6_route_lookup() can return an error-free route whose rt6i_idev is
NULL. Lowering an external nexthop device's MTU below IPV6_MIN_MTU tears
down its inet6_dev while fib6_ifdown() leaves routes using nexthop objects
in the FIB. An unprivileged user can construct this state with rtnetlink
in a private user and network namespace, then trigger a NULL dereference
through an IPv6 rpfilter lookup:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000000
KASAN: null-ptr-deref in range [0