p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in bind · Seite 2

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für bind: 0. Davon im KEV-Katalog: 0.

Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 43

  1. ALPINE-CVE-2020-8618

    Mittel · CVSS 4.9Korrektur verfügbar

    ALPINE-CVE-2020-8618

    An attacker who is permitted to send zone data to a server via zone transfer can exploit this to intentionally trigger the assertion failure with a specially constructed zone, denying service to clients.

    • Auf 9.16.4-r0 aktualisieren
    Veröffentlicht Aktualisiert
  2. ALPINE-CVE-2020-8617

    Mittel · CVSS 5.9Korrektur verfügbar

    ALPINE-CVE-2020-8617

    Using a specially-crafted message, an attacker may potentially cause a BIND server to reach an inconsistent state if the attacker knows (or successfully guesses) the name of a TSIG key used by the server. Since BIND, by default, configures a local session key even on servers whose configuration does not otherwise make use of it, almost all current BIND servers are vulnerable. In releases of BIND dating from March 2018 and after, an assertion check in tsig.c detects this inconsistent state and deliberately exits. Prior to the introduction of the check the server would continue operating in an inconsistent state, with potentially harmful result

    • Auf 9.14.12-r0 aktualisieren
    Veröffentlicht Aktualisiert
  3. ALPINE-CVE-2020-8616

    Hoch · CVSS 8.6Korrektur verfügbar

    ALPINE-CVE-2020-8616

    A malicious actor who intentionally exploits this lack of effective limitation on the number of fetches performed when processing referrals can, through the use of specially crafted referrals, cause a recursing server to issue a very large number of fetches in an attempt to process the referral. This has at least two potential effects: The performance of the recursing server can potentially be degraded by the additional work required to perform these fetches, and The attacker can exploit this behavior to use the recursing server as a reflector in a reflection attack with a high amplification factor.

    • Auf 9.14.12-r0 aktualisieren
    Veröffentlicht Aktualisiert
  4. ALPINE-CVE-2019-6477

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2019-6477

    With pipelining enabled each incoming query on a TCP connection requires a similar resource allocation to a query received via UDP or via TCP without pipelining enabled. A client using a TCP-pipelined connection to a server could consume more resources than the server has been provisioned to handle. When a TCP connection with a large number of pipelined queries is closed, the load on the server releasing these multiple resources can cause it to become unresponsive, even for queries that can be answered authoritatively or from cache. (This is most likely to be perceived as an intermittent server problem).

    • Auf 9.14.8-r0 aktualisieren
    Veröffentlicht Aktualisiert
  5. ALPINE-CVE-2019-6476

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2019-6476

    A defect in code added to support QNAME minimization can cause named to exit with an assertion failure if a forwarder returns a referral rather than resolving the query. This affects BIND versions 9.14.0 up to 9.14.6, and 9.15.0 up to 9.15.4.

    • Auf 9.14.7-r0 aktualisieren
    Veröffentlicht Aktualisiert
  6. ALPINE-CVE-2019-6475

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2019-6475

    Mirror zones are a BIND feature allowing recursive servers to pre-cache zone data provided by other servers. A mirror zone is similar to a zone of type secondary, except that its data is subject to DNSSEC validation before being used in answers, as if it had been looked up via traditional recursion, and when mirror zone data cannot be validated, BIND falls back to using traditional recursion instead of the mirror zone. However, an error in the validity checks for the incoming zone data can allow an on-path attacker to replace zone data that was validated with a configured trust anchor with forged data of the attacker's choosing. The mirror zo

    • Auf 9.14.7-r0 aktualisieren
    Veröffentlicht Aktualisiert
  7. ALPINE-CVE-2019-6471

    Mittel · CVSS 5.9Korrektur verfügbar

    ALPINE-CVE-2019-6471

    A race condition which may occur when discarding malformed packets can result in BIND exiting due to a REQUIRE assertion failure in dispatch.c. Versions affected: BIND 9.11.0 -> 9.11.7, 9.12.0 -> 9.12.4-P1, 9.14.0 -> 9.14.2. Also all releases of the BIND 9.13 development branch and version 9.15.0 of the BIND 9.15 development branch and BIND Supported Preview Edition versions 9.11.3-S1 -> 9.11.7-S1.

    • Auf 9.14.4-r0 aktualisieren
    Veröffentlicht Aktualisiert
  8. ALPINE-CVE-2019-6467

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2019-6467

    A programming error in the nxdomain-redirect feature can cause an assertion failure in query.c if the alternate namespace used by nxdomain-redirect is a descendant of a zone that is served locally. The most likely scenario where this might occur is if the server, in addition to performing NXDOMAIN redirection for recursive clients, is also serving a local copy of the root zone or using mirroring to provide the root zone, although other configurations are also possible. Versions affected: BIND 9.12.0-> 9.12.4, 9.14.0. Also affects all releases in the 9.13 development branch.

    • Auf 9.14.1-r0 aktualisieren
    Veröffentlicht Aktualisiert
  9. ALPINE-CVE-2019-6465

    Mittel · CVSS 5.3Korrektur verfügbar

    ALPINE-CVE-2019-6465

    Controls for zone transfers may not be properly applied to Dynamically Loadable Zones (DLZs) if the zones are writable Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P2, 9.12.0 -> 9.12.3-P2, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2019-6465.

    • Auf 9.12.3_p4-r0 aktualisieren
    Veröffentlicht Aktualisiert
  10. ALPINE-CVE-2018-5745

    Mittel · CVSS 4.9Korrektur verfügbar

    ALPINE-CVE-2018-5745

    "managed-keys" is a feature which allows a BIND resolver to automatically maintain the keys used by trust anchors which operators configure for use in DNSSEC validation. Due to an error in the managed-keys feature it is possible for a BIND server which uses managed-keys to exit due to an assertion failure if, during key rollover, a trust anchor's keys are replaced with keys which use an unsupported algorithm. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.9.3-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected. Ver

    • Auf 9.12.3_p4-r0 aktualisieren
    Veröffentlicht Aktualisiert
  11. ALPINE-CVE-2018-5744

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2018-5744

    A failure to free memory can occur when processing messages having a specific combination of EDNS options. Versions affected are: BIND 9.10.7 -> 9.10.8-P1, 9.11.3 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.10.7-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected.

    • Auf 9.12.3_p4-r0 aktualisieren
    Veröffentlicht Aktualisiert
  12. ALPINE-CVE-2018-5743

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2018-5743

    By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development br

    • Auf 9.14.1-r0 aktualisieren
    Veröffentlicht Aktualisiert
  13. ALPINE-CVE-2018-5740

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2018-5740

    "deny-answer-aliases" is a little-used feature intended to help recursive server operators protect end users against DNS rebinding attacks, a potential method of circumventing the security model used by client browsers. However, a defect in this feature makes it easy, when the feature is in use, to experience an assertion failure in name.c. Affects BIND 9.7.0->9.8.8, 9.9.0->9.9.13, 9.10.0->9.10.8, 9.11.0->9.11.4, 9.12.0->9.12.2, 9.13.0->9.13.2.

    • Auf 9.12.2_p1-r0 aktualisieren
    Veröffentlicht Aktualisiert
  14. ALPINE-CVE-2018-5738

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2018-5738

    Change #4777 (introduced in October 2017) introduced an unforeseen issue in releases which were issued after that date, affecting which clients are permitted to make recursive queries to a BIND nameserver. The intended (and documented) behavior is that if an operator has not specified a value for the "allow-recursion" setting, it SHOULD default to one of the following: none, if "recursion no;" is set in named.conf; a value inherited from the "allow-query-cache" or "allow-query" settings IF "recursion yes;" (the default for that setting) AND match lists are explicitly set for "allow-query-cache" or "allow-query" (see the BIND9 Administrative R

    • Auf 9.12.2_p1-r0 aktualisieren
    Veröffentlicht Aktualisiert
  15. ALPINE-CVE-2018-5737

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2018-5737

    A problem with the implementation of the new serve-stale feature in BIND 9.12 can lead to an assertion failure in rbtdb.c, even when stale-answer-enable is off. Additionally, problematic interaction between the serve-stale feature and NSEC aggressive negative caching can in some cases cause undesirable behavior from named, such as a recursion loop or excessive logging. Deliberate exploitation of this condition could cause operational problems depending on the particular manifestation -- either degradation or denial of service. Affects BIND 9.12.0 and 9.12.1.

    • Auf 9.12.1_p2-r0 aktualisieren
    Veröffentlicht Aktualisiert
  16. ALPINE-CVE-2018-5736

    Mittel · CVSS 5.3Korrektur verfügbar

    ALPINE-CVE-2018-5736

    An error in zone database reference counting can lead to an assertion failure if a server which is running an affected version of BIND attempts several transfers of a slave zone in quick succession. This defect could be deliberately exercised by an attacker who is permitted to cause a vulnerable server to initiate zone transfers (for example: by sending valid NOTIFY messages), causing the named process to exit after failing the assertion test. Affects BIND 9.12.0 and 9.12.1.

    • Auf 9.12.1_p2-r0 aktualisieren
    Veröffentlicht Aktualisiert
  17. ALPINE-CVE-2017-3145

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2017-3145

    BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1.

    • Auf 9.11.2_p1-r0 aktualisieren
    Veröffentlicht Aktualisiert
  18. ALPINE-CVE-2017-3138

    Mittel · CVSS 5.3Korrektur verfügbar

    ALPINE-CVE-2017-3138

    named contains a feature which allows operators to issue commands to a running server by communicating with the server process over a control channel, using a utility program such as rndc. A regression introduced in a recent feature change has created a situation under which some versions of named can be caused to exit with a REQUIRE assertion failure if they are sent a null command string. Affects BIND 9.9.9->9.9.9-P7, 9.9.10b1->9.9.10rc2, 9.10.4->9.10.4-P7, 9.10.5b1->9.10.5rc2, 9.11.0->9.11.0-P4, 9.11.1b1->9.11.1rc2, 9.9.9-S1->9.9.9-S9.

    • Auf 9.11.0_p5-r0 aktualisieren
    Veröffentlicht Aktualisiert
  19. ALPINE-CVE-2017-3137

    Hoch · CVSS 7.5Korrektur verfügbar

    ALPINE-CVE-2017-3137

    Mistaken assumptions about the ordering of records in the answer section of a response containing CNAME or DNAME resource records could lead to a situation in which named would exit with an assertion failure when processing a response in which records occurred in an unusual order. Affects BIND 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0-P3, 9.11.1b1->9.11.1rc1, and 9.9.9-S8.

    • Auf 9.11.0_p5-r0 aktualisieren
    Veröffentlicht Aktualisiert
  20. ALPINE-CVE-2017-3136

    Mittel · CVSS 5.9Korrektur verfügbar

    ALPINE-CVE-2017-3136

    A query with a specific set of characteristics could cause a server using DNS64 to encounter an assertion failure and terminate. An attacker could deliberately construct a query, enabling denial-of-service against a server if it was configured to use the DNS64 feature and other preconditions were met. Affects BIND 9.8.0 -> 9.8.8-P1, 9.9.0 -> 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.0 -> 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0 -> 9.11.0-P3, 9.11.1b1->9.11.1rc1, 9.9.3-S1 -> 9.9.9-S8.

    • Auf 9.11.0_p5-r0 aktualisieren
    Veröffentlicht Aktualisiert

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →