smb: client: fix potential OOB read in smb3_enum_snapshots()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix potential OOB read in smb3_enum_snapshots()
If snapshot_array_size is smaller than GMT_TOKEN_SIZE,
smb3_enum_snapshots() sets ret_data_len to
sizeof(struct smb_snapshot_array) without verifying the actual length
of the server's reply.
Because SMB2_ioctl() places no lower bound on the server-supplied
OutputCount and allocates retbuf to exactly that length, a short reply
results in ret_data_len exceeding the size of retbuf. The subsequent
copy_to_user() then reads past the end of retbuf, leaking adjacent slab
memory to userspace. The subsequent clamp check
smb: client: fix reparse buffer bounds in cifs_query_reparse_point()
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix reparse buffer bounds in cifs_query_reparse_point()
In cifs_query_reparse_point(), the start >= end check before casting to
struct reparse_data_buffer * only ensures the start pointer is within the
response. It fails to verify that there is enough space remaining for the
fixed 8-byte header of the structure.
If a server provides a DataOffset that leaves less than 8 bytes remaining,
the check passes, but subsequent reads of ReparseTag and ReparseDataLength
will occur out-of-bounds.
Fix this by ensuring the remaining space is at least the size of the
repars
smb: client: fix server->total_read for compound encrypted PDUs
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix server->total_read for compound encrypted PDUs
In receive_encrypted_standard(), server->total_read is left at the
full decrypted frame size when walking sub-PDUs of a compound encrypted
frame. As a result, cifs_handle_standard() passes this full size
to smb2_check_message(), causing the PDU length guards to incorrectly
validate the entire compound frame instead of the current sub-PDU.
This allows truncated non-last sub-PDUs to bypass length validation,
leading to out-of-bounds reads in smb2_get_data_area_len().
Fix this by setting server->total_read to th
KVM: x86/mmu: Check write tracking in all address spaces
In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Check write tracking in all address spaces
kvm_gfn_is_write_tracked() checks only the supplied memslot, but page
tracking is per-address-space and shadow pages are shared across all
address spaces. With SMM, a GFN can therefore be write-tracked in one
address space and appear untracked through the other.
Check the supplied slot first, then the slot for the other address space.
This ensures all callers honor write tracking regardless of the active
address space. In particular, it prevents mmu_try_to_unsync_pages() from
marking an upper-level shadow page unsy
In the Linux kernel, the following vulnerability has been resolved:
nvdimm: pmem: keep PREFLUSH before data writes
pmem_submit_bio() records a REQ_PREFLUSH error, but continues to copy the
bio data and can later overwrite the error with a successful REQ_FUA flush.
That lets data writes run after a failed preflush and can complete the bio
successfully despite the failed ordering barrier.
Run the REQ_PREFLUSH flush synchronously before touching the bio data and
complete the bio with the flush error if it fails. Keep asynchronous flush
chaining for REQ_FUA. At that point, data copy has completed and the parent
bio can wait for the chained flu
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix mismatched free of HalData in rtw_sdio_if1_init()
padapter->HalData is allocated via vzalloc(), but incorrectly freed
using kfree() in the rtw_sdio_if1_init() error path. Using kfree() to
release this vmalloc-backed buffer can lead to memory corruption.
Use rtw_hal_data_deinit() to pair the free correctly and free
HalData with vfree().
The bug was first flagged by an experimental static analysis tool we
are developing for kernel memory-management bugs. Manual inspection
confirms that the issue is still present in current mainline.
An x86_64 allyes
usb: typec: ucsi: unregister debugfs entries on teardown
In the Linux kernel, the following vulnerability has been resolved:
usb: typec: ucsi: unregister debugfs entries on teardown
ucsi_register() creates per-instance debugfs entries, but
ucsi_unregister() keeps them around until ucsi_destroy().
Drivers like ucsi_glink that unregister/register the same UCSI
instance across remoteproc restart then try to create an already
existing debugfs directory and log:
debugfs: 'pmic_glink.ucsi.0' already exists in 'ucsi'
Unregister debugfs entries as part of ucsi_unregister(), and
clear ucsi->debugfs after freeing it so repeated unregister
paths remain safe.
wifi: iwlwifi: mei: pass correct argument to function
In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mei: pass correct argument to function
The first argument to iwl_mei_write_cyclic_buf() should be the cldev
but the q_head pointer is passed instead. Fix it.
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Fix srpt_alloc_rw_ctxs() unwind counters
When srpt_alloc_rw_ctxs() fails partway through a multi-buffer indirect
descriptor, the unwind path destroys RDMA contexts but leaves stale
n_rw_ctx and n_rdma values (and a dangling rw_ctxs pointer). Later
sq_wr_avail accounting in srpt_queue_response() or srpt_write_pending()
can then subtract the wrong number of send queue credits.
Reset the counters and clear rw_ctxs after freeing the heap
allocation before returning an error.
net: hsr: free learned nodes on device setup failure
In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat_sip: rewind offset when NAT shrinks the packet
sashiko says:
If map_addr() changes the packet length, such as when the public NAT IP
string is shorter or longer than the internal IP, coff will still point to
the offset relative to the pre-mangled packet.
If the packet shrinks, coff could overshoot the correct position,
potentially causing the next ct_sip_parse_header_uri() call to silently
skip bytes and miss subsequent Contact headers. Could this lead to a
failure to NAT those subsequent headers and leak internal network details?
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: validate CLC firmware records
The CLC region is supplied by firmware, but the loader trusts the
region count and each record length. A malformed image can make the
region table pointer precede the firmware buffer, make the record loop
fail to advance, or index phy->clc past its end. Validate the table and
record bounds before dereferencing or copying.
ppp_async: drop the errored frame instead of resetting its headroom
In the Linux kernel, the following vulnerability has been resolved:
ppp_async: drop the errored frame instead of resetting its headroom
ppp_receive_nonmp_frame() prepends a two-byte direction tag before running
the pass/active BPF filters:
*(__be16 *)skb_push(skb, 2) = htons(PPP_FILTER_INBOUND_TAG);
Nothing on the receive path guarantees those two bytes of headroom. The
frame-error path in ppp_async's process_input_packet() resets a reused skb's
headroom to zero while claiming to restore it to a freshly allocated state -
but a fresh skb from dev_alloc_skb() carries NET_SKB_PAD:
err:
if (skb) {
/* make skb appear as freshly allocat
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
In the Linux kernel, the following vulnerability has been resolved:
EDAC/device_sysfs: Use kstrtouint() for poll_msec to prevent truncation
The poll_msec sysfs store file uses simple_strtoul() which accepts an unsigned
long, but the target field (poll_msec) is unsigned int. On 64-bit systems,
a value > UINT_MAX is silently truncated when stored.
Fix the mismatch by using kstrtouint() instead. This rejects values larger
than UINT_MAX at parse time, making truncation impossible. Also add a check
for value < 1 to reject the 0-delay case, which would cause the poll work to
spin without delay and consume 100% CPU.
accel/qaic: Address potential out-of-bounds read in resp_worker()
In the Linux kernel, the following vulnerability has been resolved:
accel/qaic: Address potential out-of-bounds read in resp_worker()
Although 'commit 2feec5ae5df7 ("accel/qaic: Handle DBC deactivation if the
owner went away")' fixes the scenario it was intended for by walking the
message and only decoding QAIC_TRANS_DEACTIVATE_FROM_DEV, if present, it
skipped over the bounds checking code that is included in decode_message().
This could lead to issues such as reading past the slab allocation's end,
infinite loops or kernel panics. For those issues to happen, a malformed
wire message is needed to be sent from the device.
Instead of duplica
In the Linux kernel, the following vulnerability has been resolved:
nvme-rdma: fix -EIO cleanup order in queue_rq
On -EIO, the RDMA queue_rq path reports a host path error and then
still cleans up the command and unmaps the SQE DMA. The path error
helper completes the request, so that is double cleanup and DMA unmap
after the request is already complete.
Unmap the SQE first, then report the host path error. Skip the outer
command cleanup on that path.
nvmet-rdma: fix queue leak when connect backlog is exceeded
In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix queue leak when connect backlog is exceeded
When pending disconnecting queues exceed the backlog limit, the
connect path only drops the device reference and leaks the newly
allocated queue and its IB resources.
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix REG INVARIANTS VIOLATION on speculative pointer arithmetic
Take the following unprivileged program as an example:
r0 = bpf_map_lookup_elem(...) /* PTR_TO_MAP_VALUE, offset 0 */
...
14: r0 += r1 /* r1 is a bounded scalar */
15: r9 = r0
Loading it triggers a verifier warning from reg_bounds_sanity_check():
verifier bug: REG INVARIANTS VIOLATION (alu): const subreg tnum out
of sync with range bounds r64={.base=0x0, .size=0x0}
r32={.base=0x0, .size=0xffffffff} var_off=(0x0, 0x0)
What happens:
1. Processing insn 14 (r0 += r1) in adjust_ptr_min_max_vals(),
In the Linux kernel, the following vulnerability has been resolved:
drm/cirrus-qemu: Validate BAR0 size during probe
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copi
In the Linux kernel, the following vulnerability has been resolved:
sctp: fix a TOCTOU race in SCTP_CMD_TIMER_START
The SCTP_CMD_TIMER_START handler checks timer_pending() before calling
timer_reduce(). The timer can expire and detach between these operations,
causing timer_reduce() to rearm the timer without taking the association
reference required for the newly armed timer.
The timer callback later unconditionally drops its association reference,
which can leave the association reference count unbalanced and result in
use-after-free during association teardown.
Use the return value of timer_reduce() to determine whether the timer was
a