ocfs2: validate external xattr entries when reading metadata
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate external xattr entries when reading metadata
ocfs2_validate_xattr_block() checks the xattr block header before the
block reaches higher-level xattr users, but it does not verify that a
non-indexed block's xh_count and entry offsets fit inside the block.
Indexed buckets likewise reach list/get consumers after ECC without an
entry-bounds check.
Use the flat xattr entry validator for non-indexed external xattr blocks,
and use a bucket-specific validator for indexed buckets at metadata read
time. The bucket validator keeps the entry array bounded by the first
rapidio: clear mport->net when rio_add_net() fails
In the Linux kernel, the following vulnerability has been resolved:
rapidio: clear mport->net when rio_add_net() fails
rio_alloc_net() stores the newly allocated rio_net in mport->net before
rio_scan_alloc_net() registers the device.
If rio_add_net() fails, rio_scan_alloc_net() drops the device reference
with put_device(), which releases the rio_net through the device release
callback. However, mport->net is left pointing at the freed object.
A later mport unregister path can then dereference the dangling mport->net
pointer and may try to free the same rio_net again.
Clear mport->net in the rio_add_net() failure path, matching the clean
In the Linux kernel, the following vulnerability has been resolved:
fat: release buffer head after rebuilding parent
fat_scan_logstart() leaves the matching directory entry's buffer head in
sinfo.bh for the caller to release, just like fat_scan().
fat_rebuild_parent() uses the directory entry to rebuild the parent inode
for the nostale_ro NFS export path, but does not release sinfo.bh after a
successful scan. Release it once fat_build_inode() has consumed the
directory entry data.
In the Linux kernel, the following vulnerability has been resolved:
drm/omap: dsi: Do not copy isr table
To be able to unregister stuff from isrs, the corresponding table was
copied. Nobody seems to unregister stuff that way, so it does not help.
But there are stack-allocated objects passed to these isrs giving chances
of UAF of these objects if irqs are unregistered while they are handled,
so better do not copy that table.
Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht
PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers
In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Add lockdown checks to legacy I/O and memory handlers
Currently, the legacy I/O and memory sysfs handlers do not check
security_locked_down(LOCKDOWN_PCI_ACCESS), leaving the legacy_io and
legacy_mem files unprotected when the kernel is locked down.
Commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked
down") added the check to pci_write_config(), pci_mmap_resource(), and
pci_write_resource_io() to prevent userspace from programming DMA-capable
hardware that could be used to modify kernel code, but did not cover the
legacy handlers.
As a resu
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: fix OOB read via signed offset in rsc_table_for_each_entry()
table->offset[i] is a u32 from firmware, but was stored into a signed
int. A crafted offset like 0xFFFFFFF0 becomes -16, placing hdr 16 bytes
before the table buffer. The subsequent avail check was bypassed
because the negative int was promoted to a large size_t in the
expression "table_sz - offset - sizeof(*hdr)", yielding a large positive
avail and letting the out-of-bounds hdr->type read proceed undetected.
Store the offset as u32 and validate it with unsigned comparisons before
any pointer arith
bpf, cgroup: Fix invalid storage access after __cgroup_bpf_attach failed
In the Linux kernel, the following vulnerability has been resolved:
bpf, cgroup: Fix invalid storage access after __cgroup_bpf_attach failed
A potential invalid storage access issue can occur after replacing a
cgroup bpf prog.
This occurs in the following scenario:
1. prog1 with storage is attached to a cgroup in multi-attach mode.
2. prog1 is replaced with prog2 using BPF_F_REPLACE in multi-attach
mode, but fails midway (e.g. in bpf_trampoline_link_cgroup_shim or
update_effective_progs).
3. A new prog3 is attached to the cgroup in multi-attach mode.
The reason is that __cgroup_bpf_attach overwrites pl->storage with the
new storage
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
thermal: hwmon: Remove hwmon class device along with its parent
In the Linux kernel, the following vulnerability has been resolved:
thermal: hwmon: Remove hwmon class device along with its parent
The current code creates one hwmon device per thermal zone type and that
device is registered under the first thermal zone of the given type.
That turns out to be problematic when the thermal zone holding the
hwmon device is removed.
For example, say that there are two ACPI thermal zones on a system
/sys/devices/virtual/thermal/thermal_zone0/
/sys/devices/virtual/thermal/thermal_zone1/
The current code registers a hwmon class device for thermal_zone0 only:
/sys/devices/virtual/thermal/thermal_zone0/hwmo
RDMA/erdma: Hold CQ references when processing EQ events
In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold CQ references when processing EQ events
EQ handlers look up CQs from dev->cq_xa and invoke CQ completion or
error callbacks outside the xarray lock. erdma_destroy_cq() can erase the
CQ from the xarray and free its queue buffer and doorbell record while a
previously scheduled EQ handler is still using the CQ.
Add a CQ refcount and take a reference under the xarray lock with
refcount_inc_not_zero(). Remove the CQ from the xarray before dropping
the destroy-path reference, then wait for in-flight EQ users before
releasing CQ resources.
RDMA/erdma: Hold QP references for AE and CM processing
In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Hold QP references for AE and CM processing
AE QP fatal events and iWARP CM paths load QPs from dev->qp_xa
and then use or reference them outside the xarray lock.
erdma_destroy_qp() can drop the destroy-path reference and free QP
resources while such a lookup is in flight.
Add erdma_qp_get_by_qpn() to acquire a kref under the xarray
lock with kref_get_unless_zero(). Remove the QP from the xarray
before dropping the destroy-path reference so no new lookup can acquire
it while destruction waits for existing users.
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, s
ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults
In the Linux kernel, the following vulnerability has been resolved:
ARM: 9485/1: mm: acquire mmap write lock around show_pte() for user faults
When CONFIG_DEBUG_USER=y, and cmdline "user_debug=31" is set,
a user fault may trigger show_pte() without any lock.
If another thread in the same process concurrently calls munmap(),
the page table pages may be freed while show_pte() is still traversing
them, causing a use-after-free in show_pte().
If CONFIG_ARM_LPAE=y, this may cause a kernel panic if the pages table
of PMD are freed when show_pte() is running.
Acquire mmap_write_lock() around show_pte() for user faults to fix the
contention.
For
ocfs2: synchronize heartbeat callbacks with o2net teardown
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: synchronize heartbeat callbacks with o2net teardown
Patch series "ocfs2: harden heartbeat teardown races".
This series fixes two OCFS2 heartbeat/o2net teardown races found by
KASAN.
This patch (of 2):
Heartbeat callbacks stay registered while configfs local-node teardown
enters o2net_stop_listening(). A node-down event can still run through
o2net_disconnect_node() and o2net_set_nn_state() while teardown is
destroying o2net_wq, so the later queue/flush operations can hit a dead
workqueue. KASAN has caught this as a slab-use-after-free in
__queue_work() with the
ocfs2: o2hb: quiesce negotiate handlers and timeout work
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: o2hb: quiesce negotiate handlers and timeout work
Heartbeat regions publish struct o2hb_region as the private data for the
NEGO_TIMEOUT and NEGO_APPROVE o2net handlers as soon as make_item()
creates the configfs region. The approve handler can call
o2hb_arm_timeout(), so a peer can touch the region timeout work before
dev_store() has finished building the heartbeat runtime, or after teardown
has started to shut that runtime back down.
The final configfs put also has to keep reg alive until the last in-flight
o2net callback drops its handler reference.
o2net_unregi
In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear buf on error in __bpf_get_task_stack
Both bpf_get_task_stack and bpf_get_task_stack_sleepable helpers that
use __bpf_get_task_stack have buf defined as ARG_PTR_TO_UNINIT_MEM
argument and we should initialize the buf on every return path.
Adding missing buf memset for __bpf_get_task_stack fail paths. This
provides deterministic buffer contents, which is useful when the buffer
is used directly as a map key.
In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: tcon: Drop TCON TOP device reference
of_find_device_by_node() takes a device reference. Drop it after mux
configuration succeeds.
In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: crtc: Propagate layer initialization error
sun4i_crtc_init() returns plain NULL when layer initialization fails,
while all its other error paths return an error pointer. The only
caller, sun4i_tcon_bind(), checks the result with IS_ERR() and happily
continues with tcon->crtc set to NULL. sun4i_rgb_init() and
sun4i_lvds_init() then dereference it in drm_crtc_mask(), which
oopses.
Return the error pointer instead.
cpufreq: imx6q: fix devres accumulation across driver rebind
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix devres accumulation across driver rebind
imx6_soc_volt is allocated with devm_kcalloc(cpu_dev, ...), where cpu_dev
is the CPU device from get_cpu_device(0). That device is never unbound, so
its devres list is never released, and imx6q_cpufreq_remove() does not free
the array either. Every probe therefore adds an allocation that stays for
the lifetime of the system.
Allocate against the platform device instead. Its devres is released when
the driver is unbound, which is exactly the lifetime the array wants:
imx6q_set_target() reads it, and nothing may re
cpufreq: imx6q: fix out-of-bounds write when probed more than once
In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix out-of-bounds write when probed more than once
imx6_soc_volt is allocated fresh on every probe, sized to the number of
ARM OPPs:
imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
GFP_KERNEL);
but it is filled through soc_opp_count, which has static storage and is
never reset. A second bind after an unbind keeps indexing from where the
first one stopped, and writes past the end of the new array.
Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN:
BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3
IB/isert: delay the final Login Response until the session is registered
In the Linux kernel, the following vulnerability has been resolved:
IB/isert: delay the final Login Response until the session is registered
isert_put_login_tx() puts the final Login Response on the wire before
__transport_register_session(), which iscsi_post_login_handler() reaches
only after iscsi_target_do_login() returns. An initiator that issues a
SCSI command as soon as it sees that response can have it executed against
an se_session whose se_tpg is still NULL, and the ib-comp-wq worker oopses
on the NULL dereference.
Oops: general protection fault, probably for non-canonical address 0xdffffc000000000f: 0000 [#1] SMP KASAN NOPTI
K