RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables
In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables
Locked QP and CQ lookups from EQ interrupts can deadlock with
create-path XArray updates. If an interrupt arrives while the create
path holds the plain xa_lock, the lookup spins forever trying to
acquire the same lock.
Use IRQ-safe XArray helpers for all QP and CQ create-path updates,
including the GSI QP store and error paths. Initialize both arrays with
XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state.
RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted
In the Linux kernel, the following vulnerability has been resolved:
RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted
The client borrows shared CQ credits in the ADDR_RESOLVED handler via
ib_cq_pool_get(), before the peer is connected. create_cm() can return
-ERESTARTSYS from wait_event_interruptible_timeout() without destroying
the CM ID. The init_conns() and stop-and-destroy paths then call
destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards
rdma_destroy_id().
CMA serializes the handler against rdma_destroy_id() with handler_mutex,
but that does not order the GET against destroy_con_cq_qp(). If
ADDR_RESOLVED
In the Linux kernel, the following vulnerability has been resolved:
wifi: virt_wifi: free skb when disconnected
When the simulated link is disconnected, virt_wifi_start_xmit() returns
NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this
return value as consumed, so every packet sent while disconnected leaks its
skb.
Free the skb before returning the drop status.
wifi: libipw: reject too-short beacon and probe responses
In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short beacon and probe responses
libipw_process_probe_response() and the libipw_network_init() call it
makes assume the frame contains the full 36-byte beacon and probe
response prefix, but the ipw2100 and ipw2200 receive paths only
establish that a management frame carries the generic 24-byte
three-address header.
libipw_network_init() then computes the information element length as
stats->len - sizeof(*beacon)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Trunc
wifi: libipw: reject too-short association responses
In the Linux kernel, the following vulnerability has been resolved:
wifi: libipw: reject too-short association responses
libipw_handle_assoc_resp() reads the capability, status and aid fields
of the 30-byte association response prefix and then computes the
information element length as
stats->len - sizeof(*frame)
stats->len is a u16 and sizeof() has type size_t, so the subtraction is
evaluated as size_t and wraps instead of going negative. Truncating
that to the u16 length parameter of libipw_parse_info_param() turns a
frame shorter than the fixed fields into a length near 64 KiB, and the
parser then reads past the receive buffer.
Both
IB/IPoIB: Avoid restoring OPER_UP after multicast flush
In the Linux kernel, the following vulnerability has been resolved:
IB/IPoIB: Avoid restoring OPER_UP after multicast flush
ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to
prevent multicast joins while ipoib_mcast_dev_flush() is running, and
restores the flag afterwards if it was previously set.
This restore races with ipoib_ib_dev_down(). If the interface is brought
down while the flush is in progress, ipoib_ib_dev_down() clears
IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device
has already gone down.
Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race
aware"), ipoib_mcast_carrier
wifi: cfg80211: don't get the radio mask for netdev-less wdevs
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't get the radio mask for netdev-less wdevs
cfg80211_calculate_bi_data() calls rdev_get_radio_mask() with
wdev->netdev, which can be NULL and then crashes in mac80211.
To avoid that, invert the order of checks since wdev->netdev
is always valid for beaconing interfaces.
wifi: cfg80211: check IP header size in cfg80211_classify8021d()
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: check IP header size in cfg80211_classify8021d()
A frame that looks like IP can be transmitted, but be too short, so
the DS field is read incorrectly:
BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027
ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180
__ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304
ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538
...
packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:31
dmaengine: Fix device kref underflow in dma_chan_put()
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: Fix device kref underflow in dma_chan_put()
dma_chan_get() takes chan->device->ref only on the slow path:
/* no kref on fast path */
if (chan->client_count) {
__module_get(owner);
chan->client_count++;
return 0;
}
if (!try_module_get(owner))
return -ENODEV;
if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero()
dma_chan_put() drops the ref unconditionally, so every fast-path
get/put pair drops one extra device reference.
The bug fires when two conditions hold together: a non-private
provider has a persistent client holding chan->clie
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()
When dma_device_put() drops the last reference on chan->device->ref,
dma_device_release() runs and may free the dma_device along with its
channels.
dma_chan_put() then still reads chan->device->owner via
dma_chan_to_owner() for the trailing module_put(). KASAN catches it:
slab-use-after-free in dma_chan_put+0x3e6/0x4c0
Read of size 8 by task insmod/6319
Freed by task 6319:
kfree+0x225/0x470
dma_chan_put+0x395/0x4c0
dmaengine_put+0xf8/0x160
Cache the module owner in dma_chan_put() before
dmaengine: wait for RCU readers before releasing dma_device
In the Linux kernel, the following vulnerability has been resolved:
dmaengine: wait for RCU readers before releasing dma_device
dma_issue_pending_all() walks the dma_device_list with
list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release()
unlinks the device with list_del_rcu() and then calls
device->device_release() (which in many drivers, such as plx_dma.c,
directly calls kfree()).
Because there is no grace period between unlinking the device and
freeing it, concurrent RCU readers in dma_issue_pending_all() can
access the device after it has been freed.
The lockless walk originally relied on clients holding a dmaengine
refe
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't free driver-owned scan requests
When an interface goes down while a scan is running, cfg80211 completes
the scan towards userspace and frees the scan request. However, the
driver can be convinced that it owns the request, since the cancellation
is (intended to be) asynchronous.
The WARN_ON() in the netdev notifier was meant to catch this, but it's
not actually avoidable, so it triggers and we get a UAF in scan_done().
There doesn't seem to be a great way around it, so just track that the
driver is still convinced it owns the request, and then just fr
wifi: cfg80211: only group hidden BSSes with beacon entries
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: only group hidden BSSes with beacon entries
When a probe response for an unknown BSS comes in, __cfg80211_bss_update()
looks for an existing entry with the same BSSID and a hidden (zero-length
or NUL-filled) SSID, and if it finds one it groups them, using the beacon
IEs from the existing entry.
But that could find another entry without a beacon, if it was also from a
probe response (with SSID), so there's a group without beacon elements.
If a beacon with a hidden SSID for that BSSID arrives later,
cfg80211_combine_bsses() goes looking for the probe respons
wifi: cfg80211: don't filter by BSS type when removing stale entries
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: don't filter by BSS type when removing stale entries
When an assoc AP switches to a channel that already has a BSS entry,
cfg80211_update_assoc_bss_entry() removes that entry before rehashing
the real one, since the two would otherwise collide in the BSS rbtree.
The lookup for that entry also required it to match the connection's BSS
type, so an entry advertising e.g. the IBSS capability bit was left in
place, and the following cfg80211_rehash_bss() then ran into it:
WARN_ON(!cmp)
Changing the type shouldn't really happen, but can be triggered by a
rogu
wifi: cfg80211: ibss: ref BSS entry for joined event
In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: ibss: ref BSS entry for joined event
When the IBSS is joined, we only record the BSSID/channel in the event
and look up the BSS entry when processing it. However, that's racy,
e.g. a new scan with NL80211_SCAN_FLAG_FLUSH can remove it, causing a
warning in the event work:
!bss
WARNING: net/wireless/ibss.c:37 at __cfg80211_ibss_joined+0x3d3/0x440
Workqueue: cfg80211 cfg80211_event_work
cfg80211_process_wdev_events+0x39f/0x5b0 net/wireless/util.c:1144
cfg80211_process_rdev_events+0xa1/0x110 net/wireless/util.c:1179
cfg80211_event_work+0x2f/0x40
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't start a ROC while scanning
The ROC work can be pending when a scan starts (which requires
ROC list to be empty, but that's possible), and then a new ROC
can be added to the list and the work will pick it up.
Avoid starting that ROC if a scan made it between things, as
otherwise we'll hit a warning later:
WARNING: net/mac80211/offchannel.c:404 at ieee80211_start_next_roc+0x256/0x2d0
Workqueue: events_unbound cfg80211_wiphy_work
Call Trace:
__ieee80211_scan_completed+0x4fd/0xe40 net/mac80211/scan.c:537
ieee80211_scan_work+0x472/0x1ff0 net/m
wifi: mac80211: don't offload TC setup on AP_VLAN interfaces
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't offload TC setup on AP_VLAN interfaces
AP_VLAN interfaces are purely virtual, so don't try to offload
TC setup to drivers. We can't really use the AP interface either
since we may not know it all the time, and it could technically
even change.
Just reject the TC offload so things get done in software.
wifi: mac80211: abort chanswitch when leaving a mesh
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: abort chanswitch when leaving a mesh
The code in ieee80211_stop_mesh() leaves CSA active, but leaving
the mesh released the channel context, so the CSA finalize work
crashes:
Oops: general protection fault, probably for non-canonical address
0xdffffc0000000003
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
RIP: 0010:ieee80211_put_srates_elem+0x42/0x640 net/mac80211/util.c:3272
Call Trace:
ieee80211_mesh_build_beacon+0xa83/0x1b50 net/mac80211/mesh.c:1093
ieee80211_mesh_rebuild_beacon+0xc7/0x170 net/mac80211/mesh.
wifi: mac80211: reset state when starting AP fails
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset state when starting AP fails
ieee80211_start_ap() can set enable_beacon (and beacon_int) and fail
later, leaving it set forever. Scanning can then attempt to restore
beaconing on such an interface, leading to:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:mac80211_hwsim_link_info_changed+0xca7/0xf00
Call Trace:
drv_link_info_changed+0x413/0x860 net/mac80211/driver-ops.c:495
ieee80211_link_info_change_notify+0x24b/0x3c0 net/mac80211/main.c:427
ieee80211_offchannel_return+0x381/0x580 net/mac80211/offchannel.c:160
__ieee80211_
wifi: mac80211: reset the LED state when ifup fails
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: reset the LED state when ifup fails
When the first interface comes up, the radio LED is turned on. This can
start the TPT trigger timer, which continues running.
But if bringing up the interface fails then the timer keeps running and
won't be stopped by anything, eventually it can be freed:
ODEBUG: free active (active state 0) object: ffff888127e12130 object type: timer_list hint: tpt_trig_timer+0x0/0x300 net/mac80211/led.c:145
WARNING: CPU: 0 PID: 5923 at lib/debugobjects.c:612 debug_print_object+0x1a2/0x2b0
debug_check_no_obj_freed+0x4b7/0x600 lib