drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds for allocate_sdma_queue restore_sdma_id
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues.
drm/amdkfd: Fix OOB memory exposure in get_wave_state()
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix OOB memory exposure in get_wave_state()
The get_wave_state() function for v9 trusts cp_hqd_cntl_stack_size and
cp_hqd_cntl_stack_offset values read directly from the MQD, which are
written by GPU microcode and fully attacker-controlled on the
CRIU-restore path (via AMDKFD_IOC_RESTORE_PROCESS with H3).
this leads to an unbounded copy_to_user() that can leak adjacent
GTT/kernel memory. If offset > size, integer underflow produces a ~4 GiB
read length, if size is set to 1 MiB against a 4 KiB allocation, we leak
1 MiB of adjacent kernel memory (other queues' MQ
In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS.
drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate and share PSP fw_pri_buf copies via psp_copy_fw
Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter
fails, and -EINVAL when the image size is zero or larger than the
1 MiB PSP private buffer.
Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw.
drm/amdgpu: Bound GPIO I2C table entry count from VBIOS
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Bound GPIO I2C table entry count from VBIOS
Reject undersized tables and cap the derived entry count
to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[]
or walk an absurd number of entries on corrupt size fields.
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: don't call ieee80211_handle_reconfig_failure when not needed
In case reconfiguration of NAN fails, we call
ieee80211_handle_reconfig_failure, that marks all interfaces as not in
the driver.
Then, at the error path of the reconfig, cfg80211_shutdown_all_interfaces
is called to destroy all the interfaces.
If we have any other interface but the NAN one, for example a BSS
station, then when its state (links, stations) will be removed, we
won't tell the driver about this, because we will think that the
interfaces are not in the driver, and then drivers might rem
In the Linux kernel, the following vulnerability has been resolved:
net/rds: Don't sleep inside rds_ib_conn_path_shutdown
New rds rdma self tests exposed a hang when tearing down
the ib network configs. This is caused by the shutdown worker
thread sleeping on the wait_event call, which blocks other work
items in the queue. Fix this by changing wait_event to
wait_event timeout, and looping until the wait check succeeds.
In the Linux kernel, the following vulnerability has been resolved:
affs: handle set_blocksize failures
affs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
In the Linux kernel, the following vulnerability has been resolved:
bfs: handle set_blocksize failures
bfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
In the Linux kernel, the following vulnerability has been resolved:
qnx4: handle set_blocksize failures
qnx4 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
In the Linux kernel, the following vulnerability has been resolved:
jfs: handle set_blocksize failures
jfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
In the Linux kernel, the following vulnerability has been resolved:
hpfs: handle set_blocksize failures
hpfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
In the Linux kernel, the following vulnerability has been resolved:
omfs: handle set_blocksize failures
omfs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call.
usbip: vhci_hcd: fix NULL deref in status_show_vhci
In the Linux kernel, the following vulnerability has been resolved:
usbip: vhci_hcd: fix NULL deref in status_show_vhci
platform_get_drvdata() can return NULL if a VHCI host controller's
probe failed (e.g. due to USB bus number exhaustion). status_show_vhci()
checked for a NULL pdev but not for a NULL hcd returned by
platform_get_drvdata(). Passing NULL to hcd_to_vhci_hcd() does not
return NULL - it returns a pointer offset of 0x260, causing a NULL
pointer dereference when that value is subsequently dereferenced.
Add a NULL check on hcd before calling hcd_to_vhci_hcd(). Move
status_show_not_ready() above status_show_vhci() to make it calla
usb: core: hcd: fix possible deadlock in rh control transfers
In the Linux kernel, the following vulnerability has been resolved:
usb: core: hcd: fix possible deadlock in rh control transfers
>From within the SCSI error handler memory allocations must not
trigger IO. Handling errors in UAS and the storage driver may
involve resetting a device. The thread doing the reset itself
relies on VM magic. However, that is insufficient, as resetting
a device involves resuming it. Resumption as well as resetting
involves conrol transfers to the parent of the device to be reset.
That may be a root hub. Hence usbcore must heed the flags passed
to usb_submit_urb() processing control transfers to root hubs.
The pro
usb: gadget: goku_udc: avoid NULL deref of dev->driver in INT_USBRESET log
In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: goku_udc: avoid NULL deref of dev->driver in INT_USBRESET log
goku_irq() handles a number of bus events under a single ep0 path.
It already guards the gadget driver suspend/resume callbacks against a
NULL ->driver:
if (dev->gadget.speed != USB_SPEED_UNKNOWN
&& dev->driver
&& dev->driver->resume) {
spin_unlock(&dev->lock);
dev->driver->resume(&dev->gadget);
...
}
but the very next branch unconditionally dereferences dev->driver
when an INT_USBRESET arrives:
if (stat & INT_USBRESET) {
ACK(INT_USBRESET);
INFO(dev, "USB reset done, gadget %s\n
In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: fix possible ISR soft lockup
There are rare cases in which the host gets stuck in the ISR because it
is flooded with messages during the startup phase.
The reason for the soft lockup in the ISR is the missing FIFO error IRQ
(FIFOE) handling. Not handling it and reporting IRQ_HANDLED triggers
the IRQ immediately again.
Fix this by adding a check for the FIFOE status and clearing the FIFO
if no data is ready (DR).
This behavior was observed on an AM62L device which uses the OMAP 8250
driver. Fix it for all 8250 drivers, since the OMAP driver's special
IRQ set
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
tty: serial: 8250: protect against NULL uart->port.dev in register
In the Linux kernel, the following vulnerability has been resolved:
tty: serial: 8250: protect against NULL uart->port.dev in register
serial8250_register_8250_port() conditionally copies uart->port.dev
from up->port.dev only when up->port.dev is non-NULL:
if (up->port.dev) {
uart->port.dev = up->port.dev;
...
}
So if both the existing uart slot and up have a NULL ->dev,
uart->port.dev remains NULL. The very next ACPI companion check
then dereferences it unconditionally:
if (!has_acpi_companion(uart->port.dev)) {
has_acpi_companion() reads dev->fwnode without a NULL guard
(include/linux/acpi.h), so this NULL-derefs the kernel for
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
driver core: Avoid warning when removing a device while its supplier is unbinding
In the Linux kernel, the following vulnerability has been resolved:
driver core: Avoid warning when removing a device while its supplier is unbinding
During driver removal, the following warning can appear:
WARNING: CPU: 1 PID: 139 at drivers/base/core.c:1497 __device_links_no_driver+0xcc/0xfc
...
Call trace:
__device_links_no_driver+0xcc/0xfc (P)
device_links_driver_cleanup+0xa8/0xf0
device_release_driver_internal+0x208/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
device_links_unbind_consumers+0xe0/0x108
device_release_driver_internal+0xec/0x23c
de
virt: acrn: Fix irqfd use-after-free during eventfd shutdown
In the Linux kernel, the following vulnerability has been resolved:
virt: acrn: Fix irqfd use-after-free during eventfd shutdown
acrn_irqfd_deassign() and the eventfd EPOLLHUP wakeup can race and free
the same struct hsm_irqfd:
CPU0 CPU1
---- ----
eventfd_release()
wake_up_poll(EPOLLHUP)
hsm_irqfd_wakeup()
queue_work(&irqfd->shutdown)
acrn_irqfd_deassign()
hsm_irqfd_shutdown()
list_del_init()