RDMA/erdma: complete object teardown when the destroy command fails
In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: complete object teardown when the destroy command fails
erdma_destroy_qp(), erdma_destroy_cq(), erdma_dereg_mr(), and
erdma_destroy_ah() returned early when erdma_post_cmd_wait() failed,
leaking the queue buffers, MTTs, doorbells and the STAG, QPN, CQN and AHN
identifiers. A command timeout clears ERDMA_CMDQ_STATE_OK_BIT and
permanently disables the command queue, so no retry can succeed; the RDMA
core keeps the object after a failed destructor and forced uverbs cleanup
then nulls the pointers, making the resources unreachable.
Warn on failure but release every
In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix WARNING in bpf_tracing_link_release
The trampoline could be corrupted by the blindly
'tr->flags = BPF_TRAMP_F_TAIL_CALL_CTX' in verifier.
1. A fexit attached to a tail_call_reachable prog. 'tr->flags' became
'BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_TAIL_CALL_CTX'. And, the
trampoline would poke the target prog's nop insn using jmp insn instead
of call insn.
2. Another fexit loaded with the same tail_call_reachable prog target.
'tr->flags' became 'BPF_TRAMP_F_TAIL_CALL_CTX'.
3. Close the first fexit link. Due to no BPF_TRAMP_F_CALL_ORIG in
'tr->flags', t
cxl/region: Fix use-after-free in find_pos_and_ways() error path
In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Fix use-after-free in find_pos_and_ways() error path
The error path releases its reference to a switch decoder before
logging an error that includes the decoder name. If the released
reference is the last one, the decoder can be freed before the error
message accesses its name.
Drop the reference after the error is reported.
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: use devm_gpiochip_add_data() for GPIO chip
The gpio_chip is allocated with device-managed memory but registered with
the non-managed gpiochip_add_data(). This was harmless while the drivers
were built-in, but once they can be built as modules and unbound/rmmod'd,
devm frees the gpio_chip's memory while it is still registered, causing a
use-after-free.
Register it with devm_gpiochip_add_data() so it shares the same
device-managed lifecycle, which also lets the manual gpiochip_remove()
error paths go away.
In the Linux kernel, the following vulnerability has been resolved:
pinctrl: mediatek: free EINT resources on unbind
mtk_eint_do_init() creates an IRQ domain, populates it with a mapping for
every EINT line and installs a chained handler on the parent interrupt,
but none of these are ever released. This was harmless while the drivers
were built-in, but now that they can be built as modules and
unbound/rmmod'd it leaves behind a dangling IRQ domain, interrupt mappings
whose chip data points at freed memory, and a chained handler that keeps
firing into that freed data.
The plain allocations in mtk_eint_do_init() already use the device-manage
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: core: Validate string descriptors
The string descriptor length includes a two-byte header while the UTF-16
payload starts after it. utf16s_to_utf8s() expects a count of UTF-16 code
units, not bytes. Passing the payload byte count can make it read beyond
the descriptor buffer.
Validate that the payload has an even byte count, pass a code-unit count to
the converter, and allocate sufficient UTF-8 output space.
The raw string buffer starts after the descriptor header but its size is
bLength. Copying bLength bytes from that pointer can read beyond the
response buff
scsi: ufs: debugfs: Reserve space for a string terminator
In the Linux kernel, the following vulnerability has been resolved:
scsi: ufs: debugfs: Reserve space for a string terminator
ufs_saved_err_write() copies user input into a zero-initialized stack
buffer and passes it to kstrtoint(). A write that fills the entire buffer
overwrites its only terminator.
Reject an input whose length leaves no room for the trailing NUL.
crypto: keembay - Initialize completion before requesting IRQ
In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Initialize completion before requesting IRQ
kmb_ocs_aes_probe() requests the device IRQ before initializing
irq_completion. Once the handler is registered it can run immediately,
and ocs_aes_irq_handler() unconditionally calls complete(). An
interrupt in this window would therefore use an uninitialized
completion.
Initialize the completion before requesting the IRQ, as the sibling
OCS HCU and ECC drivers already do.
RDMA/mlx5: Fix integer overflow of user QP buffer size
In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix integer overflow of user QP buffer size
set_user_buf_size() computes the QP buffer size by left-shifting the
user-supplied rq.wqe_cnt and rq.wqe_shift values as signed integers.
A sufficiently large rq.wqe_cnt causes signed integer overflow, which
is undefined behavior, and yields a small or negative buf_size, causing
ib_umem_get() to map a buffer smaller than the hardware will actually
write into.
Replace the shifts and addition with check_shl_overflow() and
check_add_overflow(), rejecting invalid user inputs.
Moreover, guard the identical shift computing
In the Linux kernel, the following vulnerability has been resolved:
isofs: release zisofs block pointer buffer head
zisofs_fill_pages() reads the compressed block pointer table. The error
paths release the current buffer_head, the loop also releases the old
buffer_head when it advances. However, the success path leaves the last
buffer_head referenced. Release it before returning success.
spi: oc-tiny: switch to managed controller allocation
In the Linux kernel, the following vulnerability has been resolved:
spi: oc-tiny: switch to managed controller allocation
The controller is allocated with the non-managed spi_alloc_host() while
the interrupt is registered with devm_request_irq(). During removal,
spi_bitbang_stop() only unregisters the controller; the subsequent
spi_controller_put() then frees the controller together with its
embedded driver-private devdata, which is the IRQ handler's dev_id. The
devm_request_irq() release action (free_irq()), which drains the
handler, does not run until after .remove() returns. A late or latched
interrupt can therefore reach tiny_spi_irq
remoteproc: Prevent crash handling to race with rproc_del()
In the Linux kernel, the following vulnerability has been resolved:
remoteproc: Prevent crash handling to race with rproc_del()
There's no synchronization between rproc_crash_handler_work() and
rproc_del(), as such it's possible for a driver to be removed while
crash-handler work is scheduled, or even executing - resulting in
use-after-free issues.
To avoid this the scheduled work need to be cancelled and synchronized
against before the removal proceeds.
In order to ensure that this doesn't race with the reporting, and
thereby scheduling new work, a "deleting" flag is introduced. This is
similar to the RPROC_DELETE state that was introduc
iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Publish an LVCMDQ only after it is fully initialized
tegra241_vintf_init_lvcmdq() stores the freshly allocated vcmdq pointer to
the vintf->lvcmdqs[] array, before tegra241_vcmdq_alloc_smmu_cmdq() builds
the vcmdq->cmdq. The error ISR dereferences that cmdq, so a latched LVCMDQ
error (e.g. one inherited across a kexec) firing in this window would make
tegra241_vintf0_handle_error() pass the still-zeroed arm_smmu_cmdq down to
__arm_smmu_cmdq_skip_err(), dereferencing NULL queue register pointers.
Drop the store from tegra241_vintf_init_lvcmdq() and publ
iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't run the error ISR before probe sets up vintfs
__tegra241_cmdqv_probe() requests the error IRQ before it has allocated the
cmdqv->vintfs array and set cmdqv->num_vintfs. A CMDQV left enabled with a
latched error across a kexec fires the IRQ as soon as it is requested, and
tegra241_cmdqv_isr() then walks the uninitialized cmdqv->vintfs array.
Request the IRQ only after cmdqv->vintfs is allocated and zeroed, so that
a latched interrupt firing early runs the ISR against a valid array of NULL
slots that it safely skips.
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
__tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger
tegra241_cmdqv, which frees the original @smmu once it relocates. A failure
after that returned NULL, and the caller then dereferenced the freed @smmu
on its fallback path.
Return an int and take @smmu by reference instead, then update *smmu to the
reallocated pointer after devm_krealloc() succeeds, so the caller and its
fallback path both use the live @smmu rather than the freed original.
iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Free the error IRQ before tearing down VINTFs
tegra241_cmdqv_remove() tears each VINTF down first, then calls free_irq().
Tearing a VINTF down frees vintf0 and clears cmdqv->vintfs[0]. An error in
that window makes tegra241_cmdqv_isr() read the stale slot and hand it to
tegra241_vintf0_handle_error(), which dereferences a NULL or freed pointer.
Free the IRQ before tearing the VINTFs down. free_irq() waits for in-flight
handlers to finish and blocks new ones, so no ISR can observe a VINTF as it
is torn down.
Note: a user-owned VINTF (viommu) could out
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path
In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Fix VINTF0 leak on the init-failure path
tegra241_cmdqv_init_structures() allocates VINTF0 with kzalloc_obj(), inits
it, and preallocates its logical VCMDQs. Two of its error paths leak.
When tegra241_cmdqv_init_vintf() fails it returns before VINTF0 reaches the
cmdqv->vintfs[] array, so the devres unwind on probe failure cannot reach
it; free it directly there.
A later VCMDQ preallocation failure instead leaves VINTF0 published, and so
this time the unwind does reach tegra241_cmdqv_remove_vintf(), which then
frees it from vintf->hyp_own. But tegra24
In the Linux kernel, the following vulnerability has been resolved:
clk: mediatek: pllfh: Fix IO remapping leak in register_pllfhs error path
When mtk_clk_register_pllfhs function fails to register a PLL, it
unregisters all PLLs and cleans up itself in its error path before
returning, so the function callers don't need to do it.
But contrary to mtk_clk_unregister_pllfhs function, that does almost
the same sequence, it does not free the IO memory mapped on fhctl node,
leading to a leak.
Fix this leak by factorizing the cleanup sequence in a new private
function and use it both mtk_clk_register_pllfhs and
mtk_clk_unregister_pllfhs functions
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
PCI: Fix UAF when probe runs concurrent to dyn ID removal
In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix UAF when probe runs concurrent to dyn ID removal
Dynamic IDs are only guaranteed to be valid when dynids.lock is held,
as remove_id_store() can free the node. Thus, make a copy in
pci_match_device(). Also, clarify that the id parameter is only valid
during probe.
nilfs2: fix infinite loop in nilfs_clean_segments()
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix infinite loop in nilfs_clean_segments()
syzbot reported a hung task in nilfs_transaction_begin(). This occurs
because the cleaner ioctl falls into an infinite loop if
nilfs_segctor_construct() repeatedly returns -EROFS (e.g. the device
is remounted as read-only after an I/O error).
Currently in nilfs_clean_segments(), if err is non-zero, it logs the
error and sleeps but doesn't abort when it encounters a terminal error
like -EROFS. This causes the thread to loop forever.
Fix this by breaking out of the loop if nilfs_segctor_construct()
returns -EROFS. This mat