In the Linux kernel, the following vulnerability has been resolved:
ubi: Fix rollback for explicit UBI device numbers
ubi_init_attach() rolls back module initialization failures by scanning
ubi_devices[0..i-1], where i is the mtd= parameter index. That assumes
the parameter index matches the UBI device number.
That assumption is not true when mtd= specifies an explicit ubi_num. A
successfully attached device can be stored at a higher ubi_devices[]
slot, and a later failure can miss it during rollback.
Scan the full ubi_devices[] array and detach by the actual array index,
matching the way UBI devices are stored.
In the Linux kernel, the following vulnerability has been resolved:
mtd: ubi: Release device reference on busy detach
ubi_detach_mtd_dev() obtains a device reference through ubi_get_device()
before checking whether the UBI device is busy. The busy return path drops
ubi->ref_count but leaves the device reference held, so the device object
cannot be released after a later detach.
Drop the device reference before returning -EBUSY.
ASoC: xilinx: formatter_pcm: fix stream_data leak on open error
In the Linux kernel, the following vulnerability has been resolved:
ASoC: xilinx: formatter_pcm: fix stream_data leak on open error
In xlnx_formatter_pcm_open(), stream_data is allocated and
adata->play_stream or adata->capture_stream is assigned early. If a
later step, such as snd_pcm_hw_constraint_step() or
snd_pcm_hw_constraint_integer(), fails, the function returns the error
immediately. ALSA does not call the close callback when open fails, so
stream_data is leaked and the stream pointer is left dangling, pointing
to a substream that ALSA frees. A later interrupt would then call
snd_pcm_period_elapsed() on the freed substream.
Free
firewire: core: fix memory leak in error path of build_tree()
In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix memory leak in error path of build_tree()
In the error path of build_tree(), node instances can remain in the local
linked list when the function returns.
Whenever an invalid value is detected in the self ID sequence, each
allocated node instance is either an entry in the linked list or an
entry in the ports array of its parent node. Therefore, the allocate
node instances can be safely released by traversing the linked list from
its head.
Release the remaining node instances with for_each_fw_node() before
returning to the caller.
arm64/efi: Avoid voluntary preemption with efi_mm installed
In the Linux kernel, the following vulnerability has been resolved:
arm64/efi: Avoid voluntary preemption with efi_mm installed
Gus reports a bad kernel memory access when using software PAN
(CONFIG_ARM64_SW_TTBR0_PAN=y) on a machine with support for EFI runtime
services:
Unable to handle kernel access to user memory outside uaccess routines
at virtual address 00000000f322ff30
Mem abort info:
ESR = 0x0000000096000004
FSC = 0x04: level 0 translation fault
Internal error: Oops: 0000000096000004 [#1] SMP
Workqueue: efi_rts_wq efi_call_rts
pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : efi_call_rt
bpf, s390: Clear fetch destination on faulting arena atomic
In the Linux kernel, the following vulnerability has been resolved:
bpf, s390: Clear fetch destination on faulting arena atomic
Same missing register clear as on riscv64. A RMW atomic on an arena pointer
is converted to BPF_PROBE_ATOMIC and gets an exception table entry, but
bpf_jit_probe_atomic_pre() only fills in the arena base and the probe
offset, leaving probe->reg at the -1 that bpf_jit_probe_init() set, which
bpf_jit_probe_post() writes into the entry and ex_handler_bpf() then reads
back as "there is nothing to clear".
That is right for a plain BPF_{ADD,AND,OR,XOR}, which only writes memory,
but an RMW carrying BPF_FETCH also reads
In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix deadlock during unregister
Unregistering an s390dbf debug area while one of the associated debugfs
files is being written to can cause a deadlock:
$ echo >.../vmur/level $ rmmod vmur
===================================================
debugfs write
debugfs_file_get()
debug_unregister()
mutex_lock(debug_mutex)
debugfs_remove()
wait for debugfs_file_put()
debug_file_ops.write()
debug_input()
mutex_lock(debug_mutex) ==> DEADLOCK
Fix this by splitting deb
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/samsung_pwm: Switch to raw_spinlock_t type
Samsung PWM timer might be used as a clock source on some legacy systems.
When PREEMPT_RT is enabled on ARM, regular spinlock is converted to a
sleeping lock (mutex-based), which must not be used in atomic context
such as hard interrupt handlers. Switch the samsung_pwm_lock to the
raw_spinlock, which remains a true non-sleeping spinlock even
under PREEMPT_RT.
ALSA: seq: midi: Serialize input teardown with event_input
In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: midi: Serialize input teardown with event_input
snd_midi_input_event() must not be running while a rawmidi substream is
closing, since this can lead to the trigger state becoming out-of-step
through this sequence in snd_rawmidi_input_trigger():
snd_rawmidi_input_trigger(up=0)
snd_midi_input_event()
-> snd_rawmidi_kernel_read()
-> snd_rawmidi_input_trigger(up=1)
-> cancel_work_sync()
which ends with the underlying device being active unexpectedly.
When this is called from close_substream(), further input can re-trigger
the input event l
nvmet: fix max_qid race between configfs and controller allocation
In the Linux kernel, the following vulnerability has been resolved:
nvmet: fix max_qid race between configfs and controller allocation
The function nvmet_subsys_attr_qid_max_store() can race against
nvmet_alloc_ctrl() when a subsystem's max_qid limit is modified.
Suppose max_qid is currently 64. If nvmet_alloc_ctrl() executes:
ctrl->sqs = kzalloc_objs(struct nvmet_sq *, subsys->max_qid + 1);
and at this exact point, a userspace process changes max_qid to 128,
nvmet_subsys_attr_qid_max_store() will set the new max_qid value. It
attempts to delete active controllers to force a reconnect, but the
new controller won't be deleted because it has
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate orphan slot during inode read
Patch series "ocfs2: validate active orphan slots during inode read".
OCFS2 trusts active ordinary and append-DIO orphan slots read from dinodes.
A corrupted slot can therefore index osb_orphan_wipes or the slot-local
system-inode cache outside their allocations before the corruption is
reported.
Patch 1 validates the ordinary orphan slot used by inode wipe processing.
Patch 2 validates the append-DIO orphan slot used by DIO completion and
orphan recovery. Both checks reject corrupt metadata at the existing inode
validation b
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate DIO orphan slot during inode read
[BUG]
A corrupted append-DIO dinode (high byte at offset 0xa1
corrupted from 0 to 1) can carry an i_dio_orphaned_slot
outside the mounted filesystem slot range and trigger a
use-after-free error:
BUG: KASAN: slab-use-after-free in ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
Read of size 8 at addr ffff88800b767c00 by task kworker/u8:3/85
Call Trace:
...
ocfs2_get_system_file_inode+0x780/0x820 fs/ocfs2/sysfile.c:102
ocfs2_wipe_inode+0x292/0xf70 fs/ocfs2/inode.c:840
ocfs2_delete_inode fs/ocfs2/inode.c:11
In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check block offset is not negative
If a negative offset is read off disk (for example the offset into the
decompressed fragment block), this will cause squashfs_copy_data() to
perform an out of bounds access.
Fix by checking if offset is negative, and returning 0. This matches
existing behaviour where an offset beyond the block returns 0 bytes
copied.
To trigger this out of bounds access requires a crafted Squashfs
filesystem and CAP_SYS_ADMIN to mount it. Unprivileged users will not be
able to mount such a filesystem, but once mounted, an unprivileged user
ca
In the Linux kernel, the following vulnerability has been resolved:
scsi: mpt3sas: Avoid freeing unallocated PCIe SGL buffers
_base_release_memory_pools() unconditionally frees every
ioc->pcie_sg_lookup[] entry, including ones the setup loop never
allocated after a partial failure, causing a "bad dma" warning on debug
kernels or a NULL pointer dereference otherwise.
net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race
In the Linux kernel, the following vulnerability has been resolved:
net: page_pool: fix UAF in __page_pool_release_netmem_dma on xa_cmpxchg race
This bug was discovered while testing the hns3 driver under channel
reconfiguration (`ethtool -L` / `ethtool -G`) with iperf3 traffic on
arm64. The race is intermittently triggered when page_pool_destroy()
runs page_pool_scrub() concurrently with page return via
page_pool_put_netmem() on a different CPU. A WARN in
page_pool_clear_pp_info() surfaced the dangling DMA index bits left
by the cmpxchg loser, which led to the investigation.
page_pool_scrub() iterates pool->dma_mapped via xa_for_each() wi
fs/ntfs3: fix integer overflow in MFT cluster validation
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix integer overflow in MFT cluster validation
In ntfs_init_from_boot(), the boot sector's MFT cluster numbers are
validated against the volume size with:
if (mlcn * sct_per_clst >= sectors ||
mlcn2 * sct_per_clst >= sectors)
goto out;
mlcn and mlcn2 are u64 fields read directly from the boot sector.
sct_per_clst is bounded above by 4096 (true_sectors_per_clst() plus
the is_power_of_2() check below it), but the multiplication is done
in u64 and wraps when mlcn (or mlcn2) is large enough -- e.g. mlcn
near 2^62 with sct_per_clst == 4 wraps to 0, which com
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject out-of-range evcn in mi_enum_attr()
In mi_enum_attr(), the start/end VCN validation for non-resident
attributes is:
if (svcn > evcn + 1) goto out;
When evcn is U64_MAX the "evcn + 1" expression wraps to 0 and any svcn
passes the check. For evcn values close to U64_MAX (but not equal to it)
the right-hand side is still a meaningless near-wrap upper bound, so a
malformed on-disk attribute with svcn == 0 and evcn near U64_MAX can pass
mi_enum_attr() unrejected.
VCN (virtual cluster number) is a cluster index, so any valid evcn is
bounded by the volume's to
ALSA: core: Fix use-after-free in snd_card_do_free()
In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix use-after-free in snd_card_do_free()
A use-after-free was detected in snd_card_do_free() when a sound card
managed by devres is unbound while a user-space application still holds an
open file descriptor.
For managed cards, the memory is allocated using devres_alloc(), and its
release function is set to __snd_card_release(), which calls
snd_card_free(). When the device is unbound, the unbind thread calls
snd_card_free(), which drops a reference to the card's device. If the user
thread still has an open file descriptor, the reference count does not
reach zero
HID: haptic: don't write an uninitialized value to unhandled usages
In the Linux kernel, the following vulnerability has been resolved:
HID: haptic: don't write an uninitialized value to unhandled usages
fill_effect_buf() initializes value only for the four haptic usages
handled by its switch, but writes it to field->value[] for every usage.
An unhandled usage can therefore receive either an uninitialized value
or one left over from the previous usage. hid_output_report() then
serializes that value into the effect's report buffer.
Skip unhandled usages instead. This also matches switch_mode(), which
only updates fields it recognizes.
Found with Clang's -Wconditional-uninitialized.
ASoC: SOF: validate topology volume range before allocation
In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: validate topology volume range before allocation
SOF treats the topology mixer min and max values as non-negative indices
into its volume table. It stores them in signed fields, allocates max + 1
entries through an int argument, and later indexes the table with the
stored range.
An inverted range is invalid, while a maximum at or above INT_MAX cannot
be represented safely after the increment or in the signed fields.
Validate the complete range before storing it or allocating the table.