drm/bridge: Fix unlocked list_del in drm_bridge_add()
In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: Fix unlocked list_del in drm_bridge_add()
When re-adding a bridge that was previously removed, drm_bridge_add()
drops it from bridge_lingering_list without holding bridge_lock.
Both bridge_list and bridge_lingering_list are protected by bridge_lock,
as they are concurrently modified by drm_bridge_remove() and
__drm_bridge_free(), and walked by the debugfs 'bridges' file. Running
the list_empty() test and the list_del_init() outside of the lock may
therefore corrupt either list.
Perform both under bridge_lock.
cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode()
In the Linux kernel, the following vulnerability has been resolved:
cgroup/cpuset: Don't access cpuset_cgrp_subsys.root in is_in_v2_mode()
After seeing the patch [1] to guard is_in_v2_mode() with RCU, it makes
me realize that is_in_v2_mode() may be called in a context where a new
cgroup filesystem is being rebound with stale cpuset_cgrp_subsys.root
pointer. Avoid this potential UaF situation by adding a new cpuset_v2_mode
flag which is set when the cpuset_v2_mode mount option is used. This
flag is written into only when cpuset_bind() is being called with a
stable cpuset_cgrp_subsys.root value. The is_in_v2_mode() helper is
modified to read
gpio: exar: initialize the ID before registering its cleanup
In the Linux kernel, the following vulnerability has been resolved:
gpio: exar: initialize the ID before registering its cleanup
devm_add_action_or_reset() invokes the cleanup action immediately when
registering the action fails. gpio_exar_probe() currently stores the
allocated ID in exar_gpio only after registering the action, so that
failure makes exar_devm_ida_free() release ID 0. If the allocated ID is
nonzero, this leaks that ID and can free ID 0 belonging to another device.
Store the ID before registering the cleanup action so both the immediate
failure path and normal device teardown release the correct allocation.
In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Free the BO cache size list on teardown
vc4_bo_cache_destroy() purges the cached BOs but never frees the size
list, leaking it on every unbind.
net/sched: em_text: reject unterminated algo before autoload
In the Linux kernel, the following vulnerability has been resolved:
net/sched: em_text: reject unterminated algo before autoload
This is a follow-up to commit 9c572a83037a ("net/sched: fix potential
stack infoleak in em_text_dump()"), which zero-initialised the dump-side
struct. Sashiko pointed at a pre-existing bug that exposed the change-side
input-validation gap open.
em_text_change() casts the raw netlink attribute payload to struct
tcf_em_text and passes conf->algo, a 16-byte array with no enforced NUL
terminator, to textsearch_prepare(). On the TS_AUTOLOAD retry
textsearch_prepare() calls request_module("ts_%s", algo); vsnprintf()
w
amt: send the relay's General Query directly from the receive path
In the Linux kernel, the following vulnerability has been resolved:
amt: send the relay's General Query directly from the receive path
An skb queued in a qdisc can outlive the tunnel it references
through a raw pointer in skb->cb. For example, with igmp_qrv set
to 1 on the relay a tunnel lives for 135s, so a netem delay of
180s on the amt device outlives it; when the tunnel expires and is
freed, the subsequent dequeue triggers a use-after-free in
amt_dev_xmit().
BUG: KASAN: slab-use-after-free in amt_dev_xmit+0x2763/0x2e20
Call Trace:
amt_dev_xmit+0x2763/0x2e20 [drivers/net/amt.c:1262]
dev_hard_start_xmit+0x22f/0x620
sch_direc
cxgb4/ch_ktls: disable softirqs around tid_list erases
In the Linux kernel, the following vulnerability has been resolved:
cxgb4/ch_ktls: disable softirqs around tid_list erases
chcr_ktls_cpl_act_open_rpl() inserts into tid_list from the receive path
using xa_insert_bh(). The array is shared by the adapter's connections
and initialized with XA_FLAGS_LOCK_BH. However, chcr_ktls_dev_del() and
the chcr_ktls_dev_add() error path use xa_erase(), which takes the XArray
lock without disabling softirqs.
When cleanup runs with softirqs enabled, a receive softirq for another
connection on the same CPU can interrupt the erase and spin on the lock
held by the interrupted task. Use xa_erase_bh() at both
bonding: fix the program leak when XDP is replaced
In the Linux kernel, the following vulnerability has been resolved:
bonding: fix the program leak when XDP is replaced
We need to release the reference on the old BPF prog, whether
we are going to no-prog, or replacing the prog with another.
Spotted by AI while running tests for the propagation series
(leaked programs were accumulating). Selftest will come in
the net-next series to avoid conflicts.
In the Linux kernel, the following vulnerability has been resolved:
ice: Restore Ordered MMIO Writes for Tx Doorbells
The DQL accounting state which tracks the number of bytes queued for the
NIC to transmit, namely dql->num_queued, is updated by the ICE driver
when it invokes __netdev_tx_sent_queue(). Subsequently the driver
updates the hardware queue tail allowing the NIC to begin processing the
work queue. The queue accounting update should be ordered before the NIC
begins transmitting descriptors.
The transmit path currently updates the hardware doorbell using
writel_relaxed(), which (on arm64) does not provide the same ordering
guarant
nvmet: use the local P2P device on metadata allocation failure
In the Linux kernel, the following vulnerability has been resolved:
nvmet: use the local P2P device on metadata allocation failure
nvmet_req_alloc_p2pmem_sgls() assigns req->p2p_dev only after the data
and metadata SGL allocations succeed. If the data allocation succeeds
but the metadata allocation fails, out_free_sg passes req->p2p_dev to
pci_p2pmem_free_sgl() before that assignment has taken place.
Pass the local p2p_dev argument instead, so cleanup uses the same PCI
device as the successful data allocation.
btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio
In the Linux kernel, the following vulnerability has been resolved:
btrfs: always return -EIOCBQUEUED after btrfs_uring_read_extent_endio
If all bios finish before btrfs_encoded_read_regular_fill_pages()
returns, it calls btrfs_uring_read_extent_endio() and previously
returned the I/O status. A negative errno then made
btrfs_uring_read_extent() unlock and free while
btrfs_uring_read_finished() did the same again.
Return -EIOCBQUEUED so only the deferred path cleans up.
btrfs: free iov when btrfs_uring_read_extent() fails
In the Linux kernel, the following vulnerability has been resolved:
btrfs: free iov when btrfs_uring_read_extent() fails
After btrfs_uring_read_extent(), the caller always jumped to out_acct.
That skips kfree(data->iov), which is only correct for -EIOCBQUEUED
where the deferred path owns the iov. On failure, fall through to
out_free instead.
btrfs: unlock inode and extent in caller when io_uring read extent fails
In the Linux kernel, the following vulnerability has been resolved:
btrfs: unlock inode and extent in caller when io_uring read extent fails
btrfs_uring_read_extent() runs only after btrfs_encoded_read() has taken
the inode shared lock and the extent lock. On failure it used to unlock
in out_fail, and a pages-array allocation failure returned -ENOMEM
without unlocking at all.
Unlock in the caller instead on all failure returns, matching the
copy_to_user() error path. The deferred -EIOCBQUEUED path still unlocks
in btrfs_uring_read_finished().
btrfs: don't stash io_uring encoded data across -EAGAIN
In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished().
btrfs: fix xattr replace when multiple xattrs are packed in the same item
In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix xattr replace when multiple xattrs are packed in the same item
If we have a btrfs_dir_item item that packs multiple xattrs and then we
replace the value of one of them (with the setxattr(2) family of syscalls)
with another value of a different size, we end up not having a fully
initialized btrfs_dir_item, resulting in a corruption that the tree
checker will detect at extent buffer writeback time.
This is because in btrfs_setxattr() when we find a btrfs_dir_item with
multiple xattrs (due to the crc32c hash of their name being the same)
we delete one of the xattr
wifi: mt76: account non-AQL frames per peer rather than per link
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: account non-AQL frames per peer rather than per link
The driver increments wcid->non_aql_packets when a frame goes to the
hardware queue. The completion path decrements the counter again.
For an MLO peer, the hardware reports the completion on the link that it
used for the transmission. This link can differ from the link that the
driver queued the frame on. In that case, the increment and the
decrement go to different link wcids, and the count drifts upwards until
it blocks the station.
Keep the count on the wcid of the primary link, like the other peer-wide
s
wifi: mt76: mt7915: disable rx napi when removing device
In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7915: disable rx napi when removing device
Unloading the mt7915e module with a MT7916 triggers multiples WARN in
__netif_napi_del_locked() and in page_pool_disable_direct_recycling()
because the driver does not disable the napi before destroying it.
This is troublesome since on MT7916 it is required to unload the module
and reinsert it with a different enable_6ghz parameter to change the
frequency. The system generally becomes unstable after reinserting the
module.
Fix it by disabling rx napi inside mt7915e itself, even through napi rx is
enabled in the mt7
In the Linux kernel, the following vulnerability has been resolved:
ASoC: adau1372: allow sleepy powerdown GPIOs
gpiod_set_value() emits a WARN when the GPIO provider indicates that it
can sleep, as is typical for I2C controlled GPIO expanders. Since the
powerdown GPIO is only manipulated in process context, use the _cansleep
variant instead. This lets the driver use sleepy GPIOs to power off the
chip.
flow_dissector: avoid u16 truncation of skb->len when computing thoff
In the Linux kernel, the following vulnerability has been resolved:
flow_dissector: avoid u16 truncation of skb->len when computing thoff
__skb_flow_dissect() computes key_control->thoff using:
key_control->thoff = min_t(u16, nhoff, skb ? skb->len : hlen);
min_t(u16, ...) casts both arguments to u16 before comparing them.
Whenever skb->len (or hlen) modulo 65536 is smaller than nhoff, the
truncated length wins and thoff is set to a bogus small value, even
when the dissection succeeded. For example, an IPv4/TCP frame with
skb->len == 65540 and nhoff == 34 gets thoff == 4, so callers such as
skb_probe_transport_header() point the transpor
net: always dissect GSO packets in __virtio_net_hdr_to_skb()
In the Linux kernel, the following vulnerability has been resolved:
net: always dissect GSO packets in __virtio_net_hdr_to_skb()
Commit 9e8db5913264 ("net: avoid false positives in untrusted gso
validation") added a '&& skb->network_header' check before flow-dissecting
GSO packets without VIRTIO_NET_HDR_F_NEEDS_CSUM in
__virtio_net_hdr_to_skb(), because some callers (such as tun_get_user(),
tun_xdp_one(), virtnet_receive_done(), and raw_verify_header()) called
virtio_net_hdr_*_to_skb() before initializing skb->network_header and
skb->dev.
Because __alloc_skb() and __build_skb_around() zero-initialize
skb->network_header to 0 (unlike mac_he