ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()
In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: use skb_get_hash_net() in seg6_make_flowlabel()
Since commit d58e468b1112 ("flow_dissector: implements flow dissector
BPF hook") __skb_flow_dissect() needs a net pointer, either from
skb->dev, skb->sk, or since commit 3cbf4ffba5ee ("net: plumb network
namespace into __skb_flow_dissect") a caller provided pointer.
syzbot was able to reach seg6_make_flowlabel() with an skb having
neither skb->dev nor skb->sk set: a TIPC UDP bearer sends a discovery
message through an IPv4 route using seg6 encap, while
net.ipv6.seg6_flowlabel is set to 1.
seg6_make_flowlabel() alre
usb: hub: use shorter 120ms post resume hold for SS root hubs
In the Linux kernel, the following vulnerability has been resolved:
usb: hub: use shorter 120ms post resume hold for SS root hubs
Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers
an AMD platform issue. Users running Android adb report crashes after
adb has been polling and waking up the USB subsystem once a second for
some time. Vendors are working on a solution. Disabling USB runtime PM
is one way to prevent this issue, but it is also proven that reducing the
hold time to 120ms in resume also mitigates it. See Link for more
details.
Reducing the hold time to 120ms for the USB3 roothub is in itself a valid
chang
In the Linux kernel, the following vulnerability has been resolved:
EDAC/altera: Fix use-after-free in error paths
In both altr_edac_a10_device_add() and altr_portb_setup(), the error path
freed the dci structure before releasing the devres group. Since the managed
single and double bit IRQ handlers use altdev(dci->pvt_info) as their data, an
IRQ firing between freeing dci and unregistering the IRQs could dereference
the freed memory.
Release the devres group first so the managed IRQs are unregistered
before the dci structure is freed.
mtd: spinand: fix NULL pointer dereference with no ECC engine
In the Linux kernel, the following vulnerability has been resolved:
mtd: spinand: fix NULL pointer dereference with no ECC engine
When "nand-no-ecc-engine" is set in DT, nanddev_get_ecc_engine() takes
the NAND_ECC_ENGINE_TYPE_NONE path and returns success while leaving
nand->ecc.engine NULL. The SPI-NAND code nevertheless dereferences it
unconditionally to test for a pipelined engine, so probing such a
device oopses immediately.
Rather than open-coding the test three times, add a
nand_ecc_is_pipelined() helper to the NAND core that folds the NULL
check into the integration comparison, and use it everywhere. Future
callers then cannot reint
Open-source vector similarity search for Postgres. Supports L2 distance, inner product, and cosine distance
Security Fix(es):
* pgvector: pgvector: Arbitrary code execution via out-of-bounds write during IVFFlat index build (CVE-2026-103484)
For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.
Open-source vector similarity search for Postgres. Supports L2 distance, inner product, and cosine distance
Security Fix(es):
* pgvector: pgvector: Arbitrary code execution via out-of-bounds write during IVFFlat index build (CVE-2026-103484)
For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.
The podman tool manages pods, container images, and containers. It is part of the libpod library, which is for applications that use container pods. Container pods is a concept in Kubernetes.
Security Fix(es):
* net/http: golang: golang: Denial of Service via crafted HTTP Range headers (CVE-2026-78667)
* net/http: net/http/internal/http2: golang.org/x/net/http2: net/http: Denial of Service via excessive HTTP/2 SETTINGS frames (CVE-2026-78669)
* crypto/x509: golang: crypto/x509: Man-in-the-middle attacks via untrusted intermediate certificates (CVE-2026-111943)
For more details about the security issue(s), including the impact, a CVSS sco
The Grafana plugin for Performance Co-Pilot includes datasources for scalable time series from pmseries and Redis, live PCP metrics and bpftrace scripts from pmdabpftrace, as well as several dashboards.
Security Fix(es):
* crypto/tls: golang: crypto/tls: Denial of Service via multiple ECH outer extension references (CVE-2026-97031)
* net/http: net/http/internal/http2: golang.org/x/net/http2: net/http: Denial of Service via excessive HTTP/2 SETTINGS frames (CVE-2026-78669)
* crypto/x509: golang: crypto/x509: Man-in-the-middle attacks via untrusted intermediate certificates (CVE-2026-111943)
For more details about the security issue(s), in
HTTP reverse proxy, backed by IPP-over-USB connection to device. It enables
driverless support for USB devices capable of using IPP-over-USB protocol.
Security Fix(es):
* net/http: golang: golang: Denial of Service via crafted HTTP Range headers (CVE-2026-78667)
* crypto/tls: golang: crypto/tls: Denial of Service via multiple ECH outer extension references (CVE-2026-97031)
* net/http: net/http/internal/http2: golang.org/x/net/http2: net/http: Denial of Service via excessive HTTP/2 SETTINGS frames (CVE-2026-78669)
* crypto/x509: golang: crypto/x509: Man-in-the-middle attacks via untrusted intermediate certificates (CVE-2026-111943)
For
The buildah package provides a tool for facilitating building OCI container images. Among other things, buildah enables you to: Create a working container, either from scratch or using an image as a starting point; Create an image, either from a working container or using the instructions in a Dockerfile; Build both Docker and OCI images.
Security Fix(es):
* podman: Arbitrary file write when importing OCI archive (CVE-2025-11395)
* net/http: golang: golang: Denial of Service via crafted HTTP Range headers (CVE-2026-78667)
* net/http: net/http/internal/http2: golang.org/x/net/http2: net/http: Denial of Service via excessive HTTP/2 SETTING
Expat is a C library for parsing XML documents.
Security Fix(es):
* expat: expat: Denial of Service via integer overflow in expat_realloc (CVE-2026-102633)
* expat: expat: Information disclosure via heap buffer over-read in XML_ParseBuffer (CVE-2026-77214)
For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.
Iperf is a tool which can measure maximum TCP bandwidth and tune various parameters and UDP characteristics. Iperf reports bandwidth, delay jitter, and data-gram loss.
Security Fix(es):
* iperf3: iperf3: Denial of Service via UDP receive worker infinite loop (CVE-2026-102253)
For more details about the security issue(s), including the impact, a CVSS score, acknowledgments, and other related information, refer to the CVE page(s) listed in the References section.
KVM: s390: Fix IRQ injection with SIGP Stop and Store Status
In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: Fix IRQ injection with SIGP Stop and Store Status
When __inject_sigp_stop() is called for a Stop and Store Status
operation, if the vCPU is running, the interrupt is marked as pending
and the status is stored by the thread performing the KVM_RUN IOCTL.
If the vCPU is already stopped, the status is stored immediately.
Storing the status means writing into userspace, which might fault, and
__inject_sigp_stop() is called from do_inject_vcpu() which in turn is
always called holding a spinlock, which is obviously an issue.
Fix this by returning -EWOULDBLOCK from __
macsec: initialize SecY before registering the netdevice
In the Linux kernel, the following vulnerability has been resolved:
macsec: initialize SecY before registering the netdevice
Creating a MACsec device with MAC offload over an LRO-capable lower
device triggers a warning in rtmsg_ifinfo_build_skb() when IPv4
forwarding is enabled by default.
register_netdevice() invokes inetdev_init(), which disables LRO and emits
a NETDEV_FEAT_CHANGE notification. This reaches macsec_fill_info() before
macsec_add_dev() initializes the SecY. key_len is still zero, so
macsec_fill_info() returns -EMSGSIZE and trips the WARN_ON in
rtmsg_ifinfo_build_skb(), even though the skb has enough space.
Even without the
KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Derive GUEST_HAS_SVE from the SVE feature bit at EL2
pkvm_init_features_from_host() takes KVM_ARCH_FLAG_GUEST_HAS_SVE and
KVM_ARM_VCPU_SVE from the host separately, but pkvm_vcpu_init_sve()
tests the bit while vcpu_has_sve() reads the flag. A host that sets the
flag without the bit gets a vCPU with a NULL sve_state that the world
switch loads the guest's SVE state from.
Derive the flag from the bit, and drop the protected path's copy of the
host's flag, which is dead code since protected VMs are not allowed SVE.
KVM: arm64: nv: Fix life cycle of the nested_mmus array
In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Fix life cycle of the nested_mmus array
The nested_mmus array holds the shadow page tables that are used when
a guest is running a nested context. These structures are allocated on
VCPU_INIT for whole guest, which implies that they may have to be
relocated as the array grows.
Should a VCPU_INIT occur whilst a vcpu is actively running an L2 and
that the allocation requires relocation, that vcpu will still be
running with a pointer to the previous structure, which will have been
freed.
Fix this by turning the array of structures to an array of pointers,
whic
In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Remove sink usage from DPMS
[Why]
stream->sink is optional and can be null, so should always be checked
before dereference. Additionally, most of its usage in DPMS sequences
is for stream->sink->link, which can be replaced with stream->link,
as the two should always be the same.
[How]
* Replace stream->sink->link in DPMS on/off
* Add assert to USB4 BW allocation where sink is required
* Avoid inconsistencies in resource access, e.g. don't repeat
stream->link after it was already saved to a local variable
* Pull out effective VPG calculation to helper gette
In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix self-redirect copied_seq double-counting
When a BPF stream_verdict program redirects an skb back to the same
socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply()
calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the
skb is then delivered to the socket's psock ingress queue and later
read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via
the copied_from_self accounting path. This double-counting causes
copied_seq to advance by 2x the actual data length, triggering:
TCP recvmsg seq # bug 2: copied BF2E806, seq BF
In the Linux kernel, the following vulnerability has been resolved:
fs: avoid repeated scans in evict_inodes()
We observed hung tasks when users attempted to unmount a filesystem
after its disk had been removed while still in use. During device
removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount.
Each time evict_inodes() drops s_inode_list_lock to reschedule, it
restarts the walk from the head of s_inodes. With many referenced inodes
at the head of the list, these restarts repeatedly scan the same inodes
without reclaiming them. This can keep s_umount held for a long time,
blocking concurrent umount attempts and trigge
arm64: io: Reject non-user protection in ioremap_prot()
In the Linux kernel, the following vulnerability has been resolved:
arm64: io: Reject non-user protection in ioremap_prot()
Mapping a stack-top page via /dev/mem with PROT_NONE and then
reading that process's /proc/<pid>/cmdline triggers a spurious WARN
in ioremap_prot() through generic_access_phys():
WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys
Call trace:
generic_access_phys+0x1c8/0x228 (P)
__access_remote_vm+0x2b4/0x398
access_remote_vm+0x14/0x30
get_mm_cmdline+0xf8/0x2a0
proc_pid_cmdline_read+0x68/0x120
generic_access_phys() passes the protection derived from the user PTE
to ioremap_prot().