Schwachstellen im Stack Betriebssysteme · Seite 22

wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211_hwsim: reject undersized HWSIM_ATTR_TX_INFO hwsim_tx_info_frame_received_nl() casts the HWSIM_ATTR_TX_INFO payload to a struct hwsim_tx_rate * and unconditionally reads IEEE80211_TX_MAX_RATES entries (8 bytes) from it. The policy only bounds the attribute from above (NLA_BINARY .len is a maximum) and the op sets GENL_DONT_VALIDATE_STRICT, so a short or zero-length attribute is accepted and the loop reads past the payload. Require the exact length in the policy, so a malformed attribute is rejected before the handler runs.

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

drm/gma500: return errors from Oaktrail HDMI I2C reads

In the Linux kernel, the following vulnerability has been resolved: drm/gma500: return errors from Oaktrail HDMI I2C reads xfer_read() waits for the HDMI I2C transaction to reach I2C_TRANSACTION_DONE, but it ignores both timeout and signal returns from wait_for_completion_interruptible_timeout(). If the interrupt never advances the transaction state, the loop can wait forever. Return -ETIMEDOUT when the completion wait expires, propagate interrupted waits, and make the I2C master_xfer callback return the first transfer error instead of reporting a successful message count.

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

ima: return error early if file xattr cannot be changed

In the Linux kernel, the following vulnerability has been resolved: ima: return error early if file xattr cannot be changed During early boot, the filesystem is read-only and any changes to xattrs are not allowed. This fails in case of ext4 because changing xattr starts an ext4 transaction which fails with the following warning. WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561 CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

mmc: core: Add validation for host-provided max_segs

In the Linux kernel, the following vulnerability has been resolved: mmc: core: Add validation for host-provided max_segs The max_segs field is of type unsigned short, and if a host driver sets an excessively large value, it may be truncated to zero. This can cause mmc_alloc_sg() to call kmalloc_objs() with a zero size allocation request, which leads to undefined behavior. Under the SLUB allocator, kmalloc(0) returns a special pointer (ZERO_SIZE_PTR). The subsequent 'if (sg)' check will evaluate to true, and sg_init_table() will then attempt to access invalid memory, resulting in a crash: dwmmc_rockchip 2a310000.mmc: Successfully tuned pha

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

serial: 8250_port: recognize UPIO_AU

In the Linux kernel, the following vulnerability has been resolved: serial: 8250_port: recognize UPIO_AU My MIPS Alchemy systems generate the following warning during probe of the 8250 driver: WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1 Unsupported UART type 4 [...] [<80521d40>] set_io_from_upio+0xfc/0x124 [<80521dfc>] serial8250_set_defaults+0x94/0xe0 [<80520fb4>] serial8250_register_8250_port+0x288/0x51c [<805214ec>] serial8250_probe+0x160/0x1e8 [<8053b5f0>] platform_probe+0x64/0x90 The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio() and do nothing, since

• Auf 7.2.6-1 aktualisieren

media: chips-media: wave5: Add range checks for dec_output_info

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Add range checks for dec_output_info If the driver's dec_output_info contains invalid data the driver can write in invalid memory. Add a range check for that. This fixes this smatch error: drivers/media/platform/chips-media/wave5/wave5-vpuapi.c:588 wave5_vpu_dec_get_output_info() error: buffer overflow 'inst->frame_buf' 64 <= 127

• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

net: bridge: remove stale rcu_barrier() in br_multicast_dev_del()

In the Linux kernel, the following vulnerability has been resolved: net: bridge: remove stale rcu_barrier() in br_multicast_dev_del() This rcu_barrier() came from a time call_rcu() calls were used in net/bridge/br_multicast.c. Now kfree_rcu() is there, we can remove this problematic rcu_barrier() which causes extreme RTNL pressure in many syzbot reports. INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537. task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337 Workqueue: netns cleanup_net Call Trace: <TASK> [<ffff

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

ntfs3: handle set_blocksize failures

In the Linux kernel, the following vulnerability has been resolved: ntfs3: handle set_blocksize failures ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

isofs: handle set_blocksize failures

In the Linux kernel, the following vulnerability has been resolved: isofs: handle set_blocksize failures isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well. Without this, mounting we will hit the BUG_ON(offset >= folio_size(folio)); in folio_set_bh on the first __bread_gfp call.

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

irqchip/gic-v5: Immediately exec priority drop following activate

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v5: Immediately exec priority drop following activate With GICv5 an interrupt of equal or lower priority cannot be signalled until there has been a priority drop. This is done via the GIC CDEOI system instruction. Once this has been executed, the hardware is able to signal the next interrupt if there is one. As all interrupts are programmed to have the same priority, no new interrupts can be signalled until the priority drop has happened. This can cause issues when, for example, an interrupt remains active while a long running process takes place, such as when

• Auf 7.2.6-1 aktualisieren

irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed

In the Linux kernel, the following vulnerability has been resolved: irqchip/gic-v4: Don't advertise VLPIs if no ITS is probed When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

host1x: bus: Fix missing ops null check in error teardown

In the Linux kernel, the following vulnerability has been resolved: host1x: bus: Fix missing ops null check in error teardown In host1x_device_init(), the error teardown paths do not check client->ops before dereferencing it, unlike the forward init paths which correctly guard with 'client->ops &&'. This can result in a NULL pointer dereference if client->ops is NULL. Fix by adding the missing client->ops check in both the teardown and teardown_late labels.

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

drm/nouveau/gsp: add SEC2 to GA100 chip table

In the Linux kernel, the following vulnerability has been resolved: drm/nouveau/gsp: add SEC2 to GA100 chip table The booter-load and booter-unload firmware run on the SEC2 falcon. During tu102_gsp_oneinit(), the booter constructor needs device->sec2 to access the SEC2 falcon. Without the .sec2 entry, device->sec2 is NULL and this dereference crashes during GSP-RM boot.

• Auf 7.2.6-1 aktualisieren

wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect

In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect Clearly, from a user perspective, it must be valid to configure WoWLAN and then suspend while not connected to a network. Since mac80211 doesn't distinguish these cases and simply calls the driver to suspend whenever WoWLAN is configured, the driver has to cleanly handle the case where it's called for WoWLAN, it's not connected but there's also no netdetect configured. Remove the WARN_ON() and keep returning 1 to disconnect and then suspend.

• Auf 7.2.6-1 aktualisieren

netfilter: nf_conntrack_expect: zero at allocation time

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: zero at allocation time There are occasional LLM hints wrt. leaking uninitialized data to userspace via ctnetlink. Just zero at allocation time, expectations are not frequently used these days. Intentionally keeps _init as-is because we could theoretically support re-init, so add the missing exp->dir there.

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

freevxfs: don't BUG() on unknown typed-extent type

In the Linux kernel, the following vulnerability has been resolved: freevxfs: don't BUG() on unknown typed-extent type vxfs_bmap_typed() handles four typed-extent types and calls BUG() in its default case, so an on-disk typed extent with any other type value crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular file: kernel BUG at fs/freevxfs/vxfs_bmap.c:230! RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline] vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257 Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value vxfs_bmap_typed() already returns on failure (and from the DEV4 case above); vxfs_ge

• Auf 6.1.190-1 aktualisieren
• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

crypto: ccp - Fix possible deadlock in SEV init failure path

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Fix possible deadlock in SEV init failure path __sev_platform_init_handle_init_ex_path() calls rmp_mark_pages_firmware() with locked=false while the parent function of init_ex_path already acquired the sev_cmd_mutex. In the case of an RMPUPDATE failure for any page after the first, the cleanup path would invoke reclaim pages which would result in a deadlock in sev_do_cmd. Pass locked=true to honor the lock status of the parent function.

• Auf 6.12.111-1 aktualisieren
• Auf 7.2.6-1 aktualisieren

ksmbd: remove stale channels from all sessions on teardown

In the Linux kernel, the following vulnerability has been resolved: ksmbd: remove stale channels from all sessions on teardown ksmbd_sessions_deregister() removes a connection's channels from other sessions' channel lists only while conn->binding is still set: if (conn->binding) { hash_for_each_safe(sessions_table, ...) ksmbd_chann_del(conn, sess); } conn->binding is a transient flag: it is cleared once a binding SESSION_SETUP completes, and also by a subsequent non-binding SESSION_SETUP on the same connection (a reauthentication on a bound channel, or a new SessionId==0 setup). A connection that has bound a channel into another se

• Auf 5.16 aktualisieren

Snap7 through 1.4.3 Out-of-Bounds Write via BRecv and CheckAsBRecvCompletion

Snap7 through 1.4.3 contains an out-of-bounds write vulnerability in the passive partner that allows a malicious active partner to overflow application buffers by declaring an unvalidated BSend total length. Attackers connecting from the configured peer address can declare up to 65535 bytes and send a short fragment, causing BRecv to memcpy past the buffer and crash or corrupt SCADA, HMI or gateway processes.

RPly through 1.1.4 Out-of-Bounds Function Pointer Index via PLY Header

RPly through 1.1.4 contains an improper array index validation vulnerability in ply_read_header_property() that accepts list as a list property's length or value type. Attackers can supply a crafted PLY file that makes ply_read_list_property() call an out-of-bounds handler, crashing ASCII parsing or corrupting memory in binary parsing.