Record ordering based unexpected exit with CNAME or DNAME
The issue is unexpected program termination based on ordering and/or specific content in responses to queries for CNAME or DNAME, and A records. Specifically, if a client queries for a DNAME and A record below the DNAME to the resolver, and the authoritative server responds positively to the A query but delays the DNAME response and later responds negatively, `named` may quit unexpectedly. Or, if a client queries for a CNAME and A record for the same name to the resolver, and the authoritative server responds positively to the A query but delays the CNAME response and later responds with a self-referential CNAME, the same failure may occur.
T
Cache poisoning possible with label count discrepancy, RRSIG, and wildcards
It is possible for an attacker's zone to respond to a query with an RRSIG that has a smaller number of labels than the zone in which the RRSIG is contained. This causes `named` to produce a wildcard name for a zone that is shorter than the attacker's zone, which can result in cache poisoning. For this attack to have any effect, the resolver under attack must have set `synth-from-dnssec yes;` (which is the default).
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
A DNSSEC validating resolver that is under a random subdomain attack against a DNSSEC-signed zone can suffer from runaway memory usage. The attacker needs to be able to send queries faster than the resolver can perform validation. The increased memory usage can be orders of magnitude beyond the limit configured in the `max-cache-size` parameter.
This issue affects BIND 9 versions 9.11.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
An attacker who knows (or guesses) that a resolver uses RPZ with wildcard CNAME policies can craft query names long enough to trigger a NAMETOOLONG error condition during RPZ processing. This is not handled correctly and may lead to defeating the RPZ rule. It also may lead to an unexpected exit of the BIND 9 software.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
Key Record using PRIVATEDNS algorithm may lead to unexpected exit
If BIND encounters a particular invalid data structure in a DNS record, it will accept the invalid data, and may subsequently abort and exit.
BIND will first need to store a DNS record for a key (KEY, DNSKEY, etc.). That key must specify a PRIVATEDNS algorithm (253), and in the algorithm identifier, improperly give a length longer than the actual identifier data. The invalid identifier will be stored. If BIND later needs to render that record to text, it will use the invalid length during processing, leading to a consistency check failing.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.
BIND may accept incorrect child-zone NSEC3 records as valid, which could allow an attacker to forge authenticated NXDOMAIN responses.
This issue affects BIND 9 versions 9.18.0 through 9.18.50, 9.20.0 through 9.20.24, 9.21.0 through 9.21.23, 9.11.3-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.24-S1.
An unbounded resend loop vulnerability exists in the BIND 9 resolver state machine during bad-server handling, enabling a remote unauthenticated attacker to cause severe resource exhaustion by sending queries that trigger specific retry conditions.
This issue affects BIND 9 versions 9.18.36 through 9.18.48, 9.20.8 through 9.20.22, 9.21.7 through 9.21.21, 9.18.36-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
Multiple flaws have been identified in `named` related to the handling of DNS messages whose CLASS is not Internet (`IN`) — for example, `CHAOS` or `HESIOD`, or DNS messages that specify meta-classes (`ANY` or `NONE`) in the question section. Specially crafted requests reaching the affected code paths — recursion, dynamic updates (`UPDATE`), zone change notifications (`NOTIFY`), or processing of `IN`-specific record types in non-`IN` data — can cause assertion failures in `named`.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.1
Amplification vulnerabilities via self-pointed glue records
BIND resolvers are vulnerable to an amplified resource consumption/exhaustion attack. If a victim resolver makes a query to a specially crafted zone, the resolver will consume disproportionate resources.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
BIND 9 server memory exhaustion during GSS-API TKEY negotiation
BIND servers that are configured to use TKEY-based authentication via GSS-API tokens are vulnerable to excessive memory consumption when receiving and processing maliciously-constructed packets. Typically these servers will be found in Active Directory integrated DNS deployments and/or Kerberos-secured DNS environments.
This issue affects BIND 9 versions 9.0.0 through 9.16.50, 9.18.0 through 9.18.48, 9.20.0 through 9.20.22, 9.21.0 through 9.21.21, 9.9.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.48-S1, and 9.20.9-S1 through 9.20.22-S1.
A stack use-after-return flaw in SIG(0) handling code may enable ACL bypass
A use-after-return vulnerability exists in the `named` server when handling DNS queries signed with SIG(0). Using a specially-crafted DNS request, an attacker may be able to cause an ACL to improperly (mis)match an IP address. In a default-allow ACL (denying only specific IP addresses), this may lead to unauthorized access. Default-deny ACLs should fail-secure.
This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1.
BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected.
Authenticated query containing a TKEY record may cause named to terminate unexpectedly
Under certain conditions, `named` may crash when processing a correctly signed query containing a TKEY record. The affected code can only be reached if an incoming request has a valid transaction signature (TSIG) from a key declared in the `named` configuration.
This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1.
BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected.
Memory leak in code preparing DNSSEC proofs of non-existence
A specially crafted domain can be used to cause a memory leak in a BIND resolver simply by querying this domain.
This issue affects BIND 9 versions 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, and 9.20.9-S1 through 9.20.20-S1.
BIND 9 versions 9.18.0 through 9.18.46 and 9.18.11-S1 through 9.18.46-S1 are NOT affected.
Excessive NSEC3 iterations cause high CPU load during insecure delegation validation
If a BIND resolver is performing DNSSEC validation and encounters a maliciously crafted zone, the resolver may consume excessive CPU. Authoritative-only servers are generally unaffected, although there are circumstances where authoritative servers may make recursive queries (see: https://kb.isc.org/docs/why-does-my-authoritative-server-make-recursive-queries).
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.46, 9.20.0 through 9.20.20, 9.21.0 through 9.21.19, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.46-S1, and 9.20.9-S1 through 9.20.20-S1.
In specific circumstances, due to a weakness in the Pseudo Random Number Generator (PRNG) that is used, it is possible for an attacker to predict the source port and query ID that BIND will use.
This issue affects BIND 9 versions 9.16.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.16.8-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.
Under certain circumstances, BIND is too lenient when accepting records from answers, allowing an attacker to inject forged data into the cache.
This issue affects BIND 9 versions 9.11.0 through 9.16.50, 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.11.3-S1 through 9.16.50-S1, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.
Querying for records within a specially crafted zone containing certain malformed DNSKEY records can lead to CPU exhaustion.
This issue affects BIND 9 versions 9.18.0 through 9.18.39, 9.20.0 through 9.20.13, 9.21.0 through 9.21.12, 9.18.11-S1 through 9.18.39-S1, and 9.20.9-S1 through 9.20.13-S1.
DNS-over-HTTPS implementation suffers from multiple issues under heavy query load
Clients using DNS-over-HTTPS (DoH) can exhaust a DNS resolver's CPU and/or memory by flooding it with crafted valid or invalid HTTP/2 traffic.
This issue affects BIND 9 versions 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, and 9.18.11-S1 through 9.18.32-S1.
Many records in the additional section cause CPU exhaustion
It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1.
If a server hosts a zone containing a "KEY" Resource Record, or a resolver DNSSEC-validates a "KEY" Resource Record from a DNSSEC-signed domain in cache, a client can exhaust resolver CPU resources by sending a stream of SIG(0) signed requests.
This issue affects BIND 9 versions 9.0.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.9.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.49-S1, and 9.18.11-S1 through 9.18.27-S1.