PatchFirst · Aktuelle Sicherheitslücken
In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-azure-5.15: 0. Davon im KEV-Katalog: 0.
Sicherheitslücken: 4531
In the Linux kernel, the following vulnerability has been resolved: gadgetfs: ep_io - wait until IRQ finishes after usb_ep_queue() if wait_for_completion_interruptible() is interrupted we need to wait until IRQ gets finished. Otherwise complete() from epio_complete() can corrupt stack.
In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix possible memory leak when failing to issue CMF WQE There is no corresponding free routine if lpfc_sli4_issue_wqe fails to issue the CMF WQE in lpfc_issue_cmf_sync_wqe. If ret_val is non-zero, then free the iocbq request structure.
In the Linux kernel, the following vulnerability has been resolved: habanalabs/gaudi: fix shift out of bounds When validating NIC queues, queue offset calculation must be performed only for NIC queues.
In the Linux kernel, the following vulnerability has been resolved: cxl: Fix a memory leak in an error handling path A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the error handling path of afu_allocate_irqs().
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-axi-dmac: do not print NULL LLI during error During debugging we have seen an issue where axi_chan_dump_lli() is passed a NULL LLI pointer which ends up causing an OOPS due to trying to get fields from it. Simply print NULL LLI and exit to avoid this.
In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-axi-dmac: ignore interrupt if no descriptor If the channel has no descriptor and the interrupt is raised then the kernel will OOPS. Check the result of vchan_next_desc() in the handler axi_chan_block_xfer_complete() to avoid the error happening.
In the Linux kernel, the following vulnerability has been resolved: drivers:md:fix a potential use-after-free bug In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug. It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function.
In the Linux kernel, the following vulnerability has been resolved: ext4: block range must be validated before use in ext4_mb_clear_bb() Block range to free is validated in ext4_free_blocks() using ext4_inode_block_valid() and then it's passed to ext4_mb_clear_bb(). However in some situations on bigalloc file system the range might be adjusted after the validation in ext4_free_blocks() which can lead to troubles on corrupted file systems such as one found by syzkaller that resulted in the following BUG kernel BUG at fs/ext4/ext4.h:3319! PREEMPT SMP NOPTI CPU: 28 PID: 4243 Comm: repro Kdump: loaded Not tainted 5.19.0-rc6+ #1 Hardware name:
In the Linux kernel, the following vulnerability has been resolved: ext4: avoid resizing to a partial cluster size This patch avoids an attempt to resize the filesystem to an unaligned cluster boundary. An online resize to a size that is not integral to cluster size results in the last iteration attempting to grow the fs by a negative amount, which trips a BUG_ON and leaves the fs with a corrupted in-memory superblock.
In the Linux kernel, the following vulnerability has been resolved: tty: serial: Fix refcount leak bug in ucc_uart.c In soc_info(), of_find_node_by_type() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
In the Linux kernel, the following vulnerability has been resolved: mips: cavium-octeon: Fix missing of_node_put() in octeon2_usb_clocks_start We should call of_node_put() for the reference 'uctl_node' returned by of_get_parent() which will increase the refcount. Otherwise, there will be a refcount leak bug.
In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use f2fs_bug_on() in f2fs_new_node_page() As Dipanjan Das <[email protected]> reported, syzkaller found a f2fs bug as below: RIP: 0010:f2fs_new_node_page+0x19ac/0x1fc0 fs/f2fs/node.c:1295 Call Trace: write_all_xattrs fs/f2fs/xattr.c:487 [inline] __f2fs_setxattr+0xe76/0x2e10 fs/f2fs/xattr.c:743 f2fs_setxattr+0x233/0xab0 fs/f2fs/xattr.c:790 f2fs_xattr_generic_set+0x133/0x170 fs/f2fs/xattr.c:86 __vfs_setxattr+0x115/0x180 fs/xattr.c:182 __vfs_setxattr_noperm+0x125/0x5f0 fs/xattr.c:216 __vfs_setxattr_locked+0x1cf/0x260 fs/xattr.c:277 vfs_set
In the Linux kernel, the following vulnerability has been resolved: powerpc/64: Init jump labels before parse_early_param() On 64-bit, calling jump_label_init() in setup_feature_keys() is too late because static keys may be used in subroutines of parse_early_param() which is again subroutine of early_init_devtree(). For example booting with "threadirqs": static_key_enable_cpuslocked(): static key '0xc000000002953260' used before call to jump_label_init() WARNING: CPU: 0 PID: 0 at kernel/jump_label.c:166 static_key_enable_cpuslocked+0xfc/0x120 ... NIP static_key_enable_cpuslocked+0xfc/0x120 LR static_key_enable_cpuslocked+0xf8/0
In the Linux kernel, the following vulnerability has been resolved: venus: pm_helpers: Fix warning in OPP during probe Fix the following WARN triggered during Venus driver probe on 5.19.0-rc8-next-20220728: WARNING: CPU: 7 PID: 339 at drivers/opp/core.c:2471 dev_pm_opp_set_config+0x49c/0x610 Modules linked in: qcom_spmi_adc5 rtc_pm8xxx qcom_spmi_adc_tm5 leds_qcom_lpg led_class_multicolor qcom_pon qcom_vadc_common venus_core(+) qcom_spmi_temp_alarm v4l2_mem2mem videobuf2_v4l2 msm(+) videobuf2_common crct10dif_ce spi_geni_qcom snd_soc_sm8250 i2c_qcom_geni gpu_sched snd_soc_qcom_common videodev qcom_q6v5_pas soundwire_qcom drm_dp_aux_
In the Linux kernel, the following vulnerability has been resolved: video: fbdev: i740fb: Check the argument of i740_calc_vclk() Since the user can control the arguments of the ioctl() from the user space, under special arguments that may result in a divide-by-zero bug. If the user provides an improper 'pixclock' value that makes the argumet of i740_calc_vclk() less than 'I740_RFREQ_FIX', it will cause a divide-by-zero bug in: drivers/video/fbdev/i740fb.c:353 p_best = min(15, ilog2(I740_MAX_VCO_FREQ / (freq / I740_RFREQ_FIX))); The following log can reveal it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:i740_calc_vclk dri
In the Linux kernel, the following vulnerability has been resolved: kprobes: don't call disarm_kprobe() for disabled kprobes The assumption in __disable_kprobe() is wrong, and it could try to disarm an already disarmed kprobe and fire the WARN_ONCE() below. [0] We can easily reproduce this issue. 1. Write 0 to /sys/kernel/debug/kprobes/enabled. # echo 0 > /sys/kernel/debug/kprobes/enabled 2. Run execsnoop. At this time, one kprobe is disabled. # /usr/share/bcc/tools/execsnoop & [1] 2460 PCOMM PID PPID RET ARGS # cat /sys/kernel/debug/kprobes/list ffffffff91345650 r __x64_sys_execve+0x0 [FTRACE] ffff
In the Linux kernel, the following vulnerability has been resolved: xfrm: fix refcount leak in __xfrm_policy_check() The issue happens on an error path in __xfrm_policy_check(). When the fetching process of the object `pols[1]` fails, the function simply returns 0, forgetting to decrement the reference count of `pols[0]`, which is incremented earlier by either xfrm_sk_policy_lookup() or xfrm_policy_lookup(). This may result in memory leaks. Fix it by decreasing the reference count of `pols[0]` in that path.
In the Linux kernel, the following vulnerability has been resolved: NFSv4.2 fix problems with __nfs42_ssc_open A destination server while doing a COPY shouldn't accept using the passed in filehandle if its not a regular filehandle. If alloc_file_pseudo() has failed, we need to decrement a reference on the newly created inode, otherwise it leaks.
In the Linux kernel, the following vulnerability has been resolved: nfc: pn533: Fix use-after-free bugs caused by pn532_cmd_timeout When the pn532 uart device is detaching, the pn532_uart_remove() is called. But there are no functions in pn532_uart_remove() that could delete the cmd_timeout timer, which will cause use-after-free bugs. The process is shown below: (thread 1) | (thread 2) | pn532_uart_send_frame pn532_uart_remove | mod_timer(&pn532->cmd_timeout,...) ... | (wait a time) kfree(pn532) //FREE | pn532_cmd_tim
In the Linux kernel, the following vulnerability has been resolved: xfrm: policy: fix metadata dst->dev xmit null pointer dereference When we try to transmit an skb with metadata_dst attached (i.e. dst->dev == NULL) through xfrm interface we can hit a null pointer dereference[1] in xfrmi_xmit2() -> xfrm_lookup_with_ifid() due to the check for a loopback skb device when there's no policy which dereferences dst->dev unconditionally. Not having dst->dev can be interepreted as it not being a loopback device, so just add a check for a null dst_orig->dev. With this fix xfrm interface's Tx error counters go up as usual. [1] net-next calltrace ca
Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.