mmc: davinci: Don't strip remove function when driver is builtin
In the Linux kernel, the following vulnerability has been resolved:
mmc: davinci: Don't strip remove function when driver is builtin
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remov
In the Linux kernel, the following vulnerability has been resolved:
kdb: Fix buffer overflow during tab-complete
Currently, when the user attempts symbol completion with the Tab key, kdb
will use strncpy() to insert the completed symbol into the command buffer.
Unfortunately it passes the size of the source buffer rather than the
destination to strncpy() with predictably horrible results. Most obviously
if the command buffer is already full but cp, the cursor position, is in
the middle of the buffer, then we will write past the end of the supplied
buffer.
Fix this by replacing the dubious strncpy() calls with memmove()/memcpy()
calls plus
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
In the Linux kernel, the following vulnerability has been resolved:
md/raid5: fix deadlock that raid5d() wait for itself to clear MD_SB_CHANGE_PENDING
Xiao reported that lvm2 test lvconvert-raid-takeover.sh can hang with
small possibility, the root cause is exactly the same as commit
bed9e27baf52 ("Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"")
However, Dan reported another hang after that, and junxiao investigated
the problem and found out that this is caused by plugged bio can't issue
from raid5d().
Current implementation in raid5d() has a weird dependence:
1) md_check_recovery() from raid5d() must hold 'reconfig_mutex' t
fbdev: savage: Handle err return when savagefb_check_var failed
In the Linux kernel, the following vulnerability has been resolved:
fbdev: savage: Handle err return when savagefb_check_var failed
The commit 04e5eac8f3ab("fbdev: savage: Error out if pixclock equals zero")
checks the value of pixclock to avoid divide-by-zero error. However
the function savagefb_probe doesn't handle the error return of
savagefb_check_var. When pixclock is 0, it will cause divide-by-zero error.
xfs: fix log recovery buffer allocation for the legacy h_size fixup
In the Linux kernel, the following vulnerability has been resolved:
xfs: fix log recovery buffer allocation for the legacy h_size fixup
Commit a70f9fe52daa ("xfs: detect and handle invalid iclog size set by
mkfs") added a fixup for incorrect h_size values used for the initial
umount record in old xfsprogs versions. Later commit 0c771b99d6c9
("xfs: clean up calculation of LR header blocks") cleaned up the log
reover buffer calculation, but stoped using the fixed up h_size value
to size the log recovery buffer, which can lead to an out of bounds
access when the incorrect h_size does not come from the old mkfs
tool, but a fuzzer.
Fix this by
The IPv6 implementation in the Linux kernel before 6.3 has a net/ipv6/route.c max_size threshold that can be consumed easily, e.g., leading to a denial of service (network is unreachable errors) when IPv6 packets are sent in a loop via a raw socket.
drm/amdgpu: add error handle to avoid out-of-bounds
In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: add error handle to avoid out-of-bounds
if the sdma_v4_0_irq_id_to_seq return -EINVAL, the process should
be stop to avoid out-of-bounds read, so directly return -EINVAL.
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
The error handling in nilfs_empty_dir() when a directory folio/page read
fails is incorrect, as in the old ext2 implementation, and if the
folio/page cannot be read or nilfs_check_folio() fails, it will falsely
determine the directory as empty and corrupt the file system.
In addition, since nilfs_empty_dir() does not immediately return on a
failed folio/page read, but continues to loop, this can cause a long loop
with I/O if i_size of the directory's inode is also corrupted, causing the
log writer thread
In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix deadlock in smb2_find_smb_tcon()
Unlock cifs_tcp_ses_lock before calling cifs_put_smb_ses() to avoid such
deadlock.
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
syzbot reports a kernel bug as below:
F2FS-fs (loop0): Mounted with checkpoint version = 48b305e4
==================================================================
BUG: KASAN: slab-out-of-bounds in f2fs_test_bit fs/f2fs/f2fs.h:2933 [inline]
BUG: KASAN: slab-out-of-bounds in current_nat_addr fs/f2fs/node.h:213 [inline]
BUG: KASAN: slab-out-of-bounds in f2fs_get_node_info+0xece/0x1200 fs/f2fs/node.c:600
Read of size 1 at addr ffff88807a58c76c by task syz-executor280/5076
CPU: 1 PID: 5076 Comm: syz-executor
thermal/drivers/qcom/lmh: Check for SCM availability at probe
In the Linux kernel, the following vulnerability has been resolved:
thermal/drivers/qcom/lmh: Check for SCM availability at probe
Up until now, the necessary scm availability check has not been
performed, leading to possible null pointer dereferences (which did
happen for me on RB1).
Fix that.
9p: add missing locking around taking dentry fid list
In the Linux kernel, the following vulnerability has been resolved:
9p: add missing locking around taking dentry fid list
Fix a use-after-free on dentry's d_fsdata fid list when a thread
looks up a fid through dentry while another thread unlinks it:
UAF thread:
refcount_t: addition on 0; use-after-free.
p9_fid_get linux/./include/net/9p/client.h:262
v9fs_fid_find+0x236/0x280 linux/fs/9p/fid.c:129
v9fs_fid_lookup_with_uid linux/fs/9p/fid.c:181
v9fs_fid_lookup+0xbf/0xc20 linux/fs/9p/fid.c:314
v9fs_vfs_getattr_dotl+0xf9/0x360 linux/fs/9p/vfs_inode_dotl.c:400
vfs_statx+0xdd/0x4d0 linux/fs/stat.c:248
Freed by:
p9_fid_destroy (inlined)
In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix uninit-value in p9_client_rpc()
Syzbot with the help of KMSAN reported the following error:
BUG: KMSAN: uninit-value in trace_9p_client_res include/trace/events/9p.h:146 [inline]
BUG: KMSAN: uninit-value in p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
trace_9p_client_res include/trace/events/9p.h:146 [inline]
p9_client_rpc+0x1314/0x1340 net/9p/client.c:754
p9_client_create+0x1551/0x1ff0 net/9p/client.c:1031
v9fs_session_init+0x1b9/0x28e0 fs/9p/v9fs.c:410
v9fs_mount+0xe2/0x12b0 fs/9p/vfs_super.c:122
legacy_get_tree+0x114/0x290 fs/fs_context.c:662
vfs_g
ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find()
In the Linux kernel, the following vulnerability has been resolved:
ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find()
Syzbot reports a warning as follows:
============================================
WARNING: CPU: 0 PID: 5075 at fs/mbcache.c:419 mb_cache_destroy+0x224/0x290
Modules linked in:
CPU: 0 PID: 5075 Comm: syz-executor199 Not tainted 6.9.0-rc6-gb947cc5bf6d7
RIP: 0010:mb_cache_destroy+0x224/0x290 fs/mbcache.c:419
Call Trace:
<TASK>
ext4_put_super+0x6d4/0xcd0 fs/ext4/super.c:1375
generic_shutdown_super+0x136/0x2d0 fs/super.c:641
kill_block_super+0x44/0x90 fs/super.c:1675
ext4_kill_sb+0x68/0xa0 fs/ext4/su
s390/ap: Fix crash in AP internal function modify_bitmap()
In the Linux kernel, the following vulnerability has been resolved:
s390/ap: Fix crash in AP internal function modify_bitmap()
A system crash like this
Failing address: 200000cb7df6f000 TEID: 200000cb7df6f403
Fault in home space mode while using kernel ASCE.
AS:00000002d71bc007 R3:00000003fe5b8007 S:000000011a446000 P:000000015660c13d
Oops: 0038 ilc:3 [#1] PREEMPT SMP
Modules linked in: mlx5_ib ...
CPU: 8 PID: 7556 Comm: bash Not tainted 6.9.0-rc7 #8
Hardware name: IBM 3931 A01 704 (LPAR)
Krnl PSW : 0704e00180000000 0000014b75e7b606 (ap_parse_bitmap_str+0x10e/0x1f8)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix potential kernel bug due to lack of writeback flag waiting
Destructive writes to a block device on which nilfs2 is mounted can cause
a kernel bug in the folio/page writeback start routine or writeback end
routine (__folio_start_writeback in the log below):
kernel BUG at mm/page-writeback.c:3070!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
...
RIP: 0010:__folio_start_writeback+0xbaa/0x10e0
Code: 25 ff 0f 00 00 0f 84 18 01 00 00 e8 40 ca c6 ff e9 17 f6 ff ff
e8 36 ca c6 ff 4c 89 f7 48 c7 c6 80 c0 12 84 e8 e7 b3 0f 00 90 <0f>
0b e8 1f ca c6 ff 4
media: lgdt3306a: Add a check against null-pointer-def
In the Linux kernel, the following vulnerability has been resolved:
media: lgdt3306a: Add a check against null-pointer-def
The driver should check whether the client provides the platform_data.
The following log reveals it:
[ 29.610324] BUG: KASAN: null-ptr-deref in kmemdup+0x30/0x40
[ 29.610730] Read of size 40 at addr 0000000000000000 by task bash/414
[ 29.612820] Call Trace:
[ 29.613030] <TASK>
[ 29.613201] dump_stack_lvl+0x56/0x6f
[ 29.613496] ? kmemdup+0x30/0x40
[ 29.613754] print_report.cold+0x494/0x6b7
[ 29.614082] ? kmemdup+0x30/0x40
[ 29.614340] kasan_report+0x8a/0x190
[ 29.614628] ? kmemdup+0x30/0x40
[
fpga: region: add owner module and take its refcount
In the Linux kernel, the following vulnerability has been resolved:
fpga: region: add owner module and take its refcount
The current implementation of the fpga region assumes that the low-level
module registers a driver for the parent device and uses its owner pointer
to take the module's refcount. This approach is problematic since it can
lead to a null pointer dereference while attempting to get the region
during programming if the parent device does not have a driver.
To address this problem, add a module owner pointer to the fpga_region
struct and use it to take the module's refcount. Modify the functions for
registering a region to ta
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
It needs to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
to avoid racing with checkpoint, otherwise, filesystem metadata including
blkaddr in dnode, inode fields and .total_valid_block_count may be
corrupted after SPO case.
f2fs: compress: don't allow unaligned truncation on released compress inode
In the Linux kernel, the following vulnerability has been resolved:
f2fs: compress: don't allow unaligned truncation on released compress inode
f2fs image may be corrupted after below testcase:
- mkfs.f2fs -O extra_attr,compression -f /dev/vdb
- mount /dev/vdb /mnt/f2fs
- touch /mnt/f2fs/file
- f2fs_io setflags compression /mnt/f2fs/file
- dd if=/dev/zero of=/mnt/f2fs/file bs=4k count=4
- f2fs_io release_cblocks /mnt/f2fs/file
- truncate -s 8192 /mnt/f2fs/file
- umount /mnt/f2fs
- fsck.f2fs /dev/vdb
[ASSERT] (fsck_chk_inode_blk:1256) --> ino: 0x5 has i_blocks: 0x00000002, but has 0x3 blocks
[FSCK] valid_block_count matching with CP