soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
In the Linux kernel, the following vulnerability has been resolved:
soc: qcom: geni-se: fix array underflow in geni_se_clk_tbl_get()
This loop is supposed to break if the frequency returned from
clk_round_rate() is the same as on the previous iteration. However,
that check doesn't make sense on the first iteration through the loop.
It leads to reading before the start of these->clk_perf_tbl[] array.
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
Fix a kernel crash with the below call trace when the SCPI firmware
returns OPP count of zero.
dvfs_info.opp_count may be zero on some platforms during the reboot
test, and the kernel will crash after dereferencing the pointer to
kcalloc(info->count, sizeof(*opp), GFP_KERNEL).
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
| Mem abort info:
| ESR = 0x96000004
| Exception class = DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0,
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: add range check for conn_rsp_epid in htc_connect_service()
I found the following bug in my fuzzer:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/ath/ath9k/htc_hst.c:26:51
index 255 is out of range for type 'htc_endpoint [22]'
CPU: 0 UID: 0 PID: 8 Comm: kworker/0:0 Not tainted 6.11.0-rc6-dirty #14
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Workqueue: events request_firmware_work_func
Call Trace:
<TASK>
dump_stack_lvl+0x180/0x1b0
__ubsan_handle_out_of_bounds+0xd4/0x130
htc_issue_send.constpr
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
In the Linux kernel, the following vulnerability has been resolved:
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
Syzbot has reported the following KMSAN splat:
BUG: KMSAN: uninit-value in ocfs2_file_read_iter+0x9a4/0xf80
ocfs2_file_read_iter+0x9a4/0xf80
__io_read+0x8d4/0x20f0
io_read+0x3e/0xf0
io_issue_sqe+0x42b/0x22c0
io_wq_submit_work+0xaf9/0xdc0
io_worker_handle_work+0xd13/0x2110
io_wq_worker+0x447/0x1410
ret_from_fork+0x6f/0x90
ret_from_fork_asm+0x1a/0x30
Uninit was created at:
__alloc_pages_noprof+0x9a7/0xe00
alloc_pages_mpol_noprof+0x299/0x990
alloc_pages_noprof+0x1bf/0x1e0
allocate_slab+0x33a/0x1250
___sla
In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Address an integer overflow
Dan Carpenter reports:
> Commit 78147ca8b4a9 ("svcrdma: Add a "parsed chunk list" data
> structure") from Jun 22, 2020 (linux-next), leads to the following
> Smatch static checker warning:
>
> net/sunrpc/xprtrdma/svc_rdma_recvfrom.c:498 xdr_check_write_chunk()
> warn: potential user controlled sizeof overflow 'segcount * 4 * 4'
>
> net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
> 488 static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt)
> 489 {
> 490 u32 segcount;
> 491 __be32 *p;
> 492
> 49
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Fix out of bounds reads when finding clock sources
The current USB-audio driver code doesn't check bLength of each
descriptor at traversing for clock descriptors. That is, when a
device provides a bogus descriptor with a shorter bLength, the driver
might hit out-of-bounds reads.
For addressing it, this patch adds sanity checks to the validator
functions for the clock descriptor traversal. When the descriptor
length is shorter than expected, it's skipped in the loop.
For the clock source and clock multiplier descriptors, we can just
check bLength against
In the Linux kernel, the following vulnerability has been resolved:
comedi: Flush partial mappings in error case
If some remap_pfn_range() calls succeeded before one failed, we still have
buffer pages mapped into the userspace page tables when we drop the buffer
reference with comedi_buf_map_put(bm). The userspace mappings are only
cleaned up later in the mmap error path.
Fix it by explicitly flushing all mappings in our VMA on the error path.
See commit 79a61cc3fc04 ("mm: avoid leaving partial pfn mappings around in
error case").
In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent a potential integer overflow
If the tag length is >= U32_MAX - 3 then the "length + 4" addition
can result in an integer overflow. Address this by splitting the
decoding into several steps so that decode_cb_compound4res() does
not have to perform arithmetic on the unsafe length value.
um: Fix potential integer overflow during physmem setup
In the Linux kernel, the following vulnerability has been resolved:
um: Fix potential integer overflow during physmem setup
This issue happens when the real map size is greater than LONG_MAX,
which can be easily triggered on UML/i386.
x86/xen: don't do PV iret hypercall through hypercall page
In the Linux kernel, the following vulnerability has been resolved:
x86/xen: don't do PV iret hypercall through hypercall page
Instead of jumping to the Xen hypercall page for doing the iret
hypercall, directly code the required sequence in xen-asm.S.
This is done in preparation of no longer using hypercall page at all,
as it has shown to cause problems with speculation mitigations.
This is part of XSA-466 / CVE-2024-53241.
In the Linux kernel, the following vulnerability has been resolved:
xen/netfront: fix crash when removing device
When removing a netfront device directly after a suspend/resume cycle
it might happen that the queues have not been setup again, causing a
crash during the attempt to stop the queues another time.
Fix that by checking the queues are existing before trying to stop
them.
This is XSA-465 / CVE-2024-53240.
A cross-privilege Spectre v2 vulnerability allows attackers to bypass all deployed mitigations, including the recent Fine(IBT), and to leak arbitrary Linux kernel memory on Intel systems.
In the Linux kernel, the following vulnerability has been resolved:
initramfs: avoid filename buffer overrun
The initramfs filename field is defined in
Documentation/driver-api/early-userspace/buffer-format.rst as:
37 cpio_file := ALGN(4) + cpio_header + filename + "\0" + ALGN(4) + data
...
55 ============= ================== =========================
56 Field name Field size Meaning
57 ============= ================== =========================
...
70 c_namesize 8 bytes Length of filename, including final \0
When extracting an initramfs cpio archive, the kernel's do_name() path
handler assumes a zero-terminat
netfilter: ipset: add missing range check in bitmap_ip_uadt
In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: add missing range check in bitmap_ip_uadt
When tb[IPSET_ATTR_IP_TO] is not present but tb[IPSET_ATTR_CIDR] exists,
the values of ip and ip_to are slightly swapped. Therefore, the range check
for ip should be done later, but this part is missing and it seems that the
vulnerability occurs.
So we should add missing range checks and remove unnecessary range checks.
netlink: terminate outstanding dump on socket close
In the Linux kernel, the following vulnerability has been resolved:
netlink: terminate outstanding dump on socket close
Netlink supports iterative dumping of data. It provides the families
the following ops:
- start - (optional) kicks off the dumping process
- dump - actual dump helper, keeps getting called until it returns 0
- done - (optional) pairs with .start, can be used for cleanup
The whole process is asynchronous and the repeated calls to .dump
don't actually happen in a tight loop, but rather are triggered
in response to recvmsg() on the socket.
This gives the user full control over the dump, but also means that
the user can
In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: kTLS, Fix incorrect page refcounting
The kTLS tx handling code is using a mix of get_page() and
page_ref_inc() APIs to increment the page reference. But on the release
path (mlx5e_ktls_tx_handle_resync_dump_comp()), only put_page() is used.
This is an issue when using pages from large folios: the get_page()
references are stored on the folio page while the page_ref_inc()
references are stored directly in the given page. On release the folio
page will be dereferenced too many times.
This was found while doing kTLS testing with sendfile() + ZC when the
served fil
In the Linux kernel, the following vulnerability has been resolved:
KVM: VMX: Bury Intel PT virtualization (guest/host mode) behind CONFIG_BROKEN
Hide KVM's pt_mode module param behind CONFIG_BROKEN, i.e. disable support
for virtualizing Intel PT via guest/host mode unless BROKEN=y. There are
myriad bugs in the implementation, some of which are fatal to the guest,
and others which put the stability and health of the host at risk.
For guest fatalities, the most glaring issue is that KVM fails to ensure
tracing is disabled, and *stays* disabled prior to VM-Enter, which is
necessary as hardware disallows loading (the guest's) RTIT_CTL if tra
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix null-ptr-deref in block_touch_buffer tracepoint
Patch series "nilfs2: fix null-ptr-deref bugs on block tracepoints".
This series fixes null pointer dereference bugs that occur when using
nilfs2 and two block-related tracepoints.
This patch (of 2):
It has been reported that when using "block:block_touch_buffer"
tracepoint, touch_buffer() called from __nilfs_get_folio_block() causes a
NULL pointer dereference, or a general protection fault when KASAN is
enabled.
This happens because since the tracepoint was added in touch_buffer(), it
references the dev_t mem
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix null-ptr-deref in block_dirty_buffer tracepoint
When using the "block:block_dirty_buffer" tracepoint, mark_buffer_dirty()
may cause a NULL pointer dereference, or a general protection fault when
KASAN is enabled.
This happens because, since the tracepoint was added in
mark_buffer_dirty(), it references the dev_t member bh->b_bdev->bd_dev
regardless of whether the buffer head has a pointer to a block_device
structure.
In the current implementation, nilfs_grab_buffer(), which grabs a buffer
to read (or create) a block of metadata, including b-tree node blocks,
d
drm/rockchip: vop: Fix a dereferenced before check warning
In the Linux kernel, the following vulnerability has been resolved:
drm/rockchip: vop: Fix a dereferenced before check warning
The 'state' can't be NULL, we should check crtc_state.
Fix warning:
drivers/gpu/drm/rockchip/rockchip_drm_vop.c:1096
vop_plane_atomic_async_check() warn: variable dereferenced before check
'state' (see line 1077)