PatchFirst · Aktuelle Sicherheitslücken
In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-aws-6.8: 813. Davon im KEV-Katalog: 0.
Sicherheitslücken: 10045
In the Linux kernel, the following vulnerability has been resolved: afs: Fix vllist leak Fix a leak of the new vllist in afs_update_cell() in the event that it is an empty list (nr_servers == 0), in which case the old list isn't displaced unless the old list is also empty.
In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Fix event length with forced 8-byte alignment When RB_FORCE_8BYTE_ALIGNMENT is true, rb_calculate_event_length() reserves the space of event->array[0] for placing the data length and rb_update_event() stores the data length in event->array[0] accordingly. As a result the whole event length will add extra 4 bytes for sizeof(event.array[0]) unconditionally. But ring_buffer_event_length() only subtracts the sizeof(event->array[0]) for events larger than RB_MAX_SMALL_DATA + sizeof(event->array[0]). As a result, small events on architectures with RB_FORCE_8BYTE_ALI
In the Linux kernel, the following vulnerability has been resolved: ipvs: use parsed transport offset in TCP state lookup TCP state handling reparses the skb to find the TCP header. For IPv6 it uses sizeof(struct ipv6hdr), while the surrounding IPVS code already parsed the packet with ip_vs_fill_iph_skb() and has the real transport-header offset in iph.len. This makes TCP state handling look at the wrong bytes when an IPv6 packet carries extension headers. Use the parsed transport offset passed down from ip_vs_set_state() when reading the TCP header. For IPv4 and for IPv6 packets without extension headers, the passed offset matches the pr
In the Linux kernel, the following vulnerability has been resolved: ALSA: hda/tas2781: Cancel async firmware request at unbind TAS2781 HDA I2C and SPI queue RCA firmware loading from component bind with request_firmware_nowait(). The firmware loader keeps the callback module pinned and holds a device reference, but the callback still uses driver-private HDA state. Component unbind removes controls and DSP state immediately. Later device removal tears down the TAS2781 private data, including codec_lock. If the async firmware callback runs after unbind has started, it can operate on state that is being torn down. Cancel or synchronize the a
In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Validate CRIU-restored IDs before idr_alloc The KFD CRIU restore flow restores previously saved object IDs from userspace. For event restore: kfd_criu_restore_event() -> create_signal_event() / create_other_event() -> allocate_event_notification_slot() -> idr_alloc(..., *restore_id, *restore_id + 1, ...) For BO restore: criu_restore_memory_of_gpu() -> idr_alloc(..., bo_priv->idr_handle, ...) In both cases, the restored ID comes from userspace-provided CRIU data. idr_alloc() expects the ID range values to fit within s
In the Linux kernel, the following vulnerability has been resolved: alpha/PCI: Add security_locked_down() check to pci_mmap_resource() Currently, Alpha's pci_mmap_resource() does not check security_locked_down(LOCKDOWN_PCI_ACCESS) before allowing userspace to mmap PCI BARs. The generic version has had this check since commit eb627e17727e ("PCI: Lock down BAR access when the kernel is locked down") to prevent DMA attacks when the kernel is locked down. Add the same check to Alpha's pci_mmap_resource().
In the Linux kernel, the following vulnerability has been resolved: tipc: avoid busy looping in tipc_exit_net() Blamed commit introduced a busy-wait loop in tipc_exit_net() to wait for pending UDP bearer cleanup works to complete: while (atomic_read(&tn->wq_count)) cond_resched(); This loop can busy-wait for a long time if cond_resched() is a NOP. This typically happens if the netns exit is executed by a high priority task, or under kernels configured without preemption (CONFIG_PREEMPT_NONE). In such cases, it wastes CPU cycles and can lead to soft lockups. Fix this by replacing the busy loop with wait_var_event(),
In the Linux kernel, the following vulnerability has been resolved: bpf: Add missing access_ok call to copy_user_syms As reported by sashiko we use __get_user without prior access_ok call on the user space pointer. Adding the missing call for the whole pointer array. Plus removing the err check in the error path, because it's not needed and also we can return -ENOMEM directly from the first kvmalloc_array fail path. [1] https://lore.kernel.org/bpf/[email protected]/
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix responder UAF on IB_QP_MAX_DEST_RD_ATOMIC modify_qp rxe_qp_from_attr() handles IB_QP_MAX_DEST_RD_ATOMIC outside the IB_QP_STATE path, so it holds no state_lock and runs while the responder task rxe_receiver() (recv_task on rxe_wq) is live. A modify_qp() setting only that attribute calls free_rd_atomic_resources() then alloc_rd_atomic_resources(), swapping qp->resp.resources[] while rxe_prepare_res()/find_resource() walk it; free_rd_atomic_resources() also leaves the cached pointer qp->resp.res dangling. A local unprivileged user can race the free/realloc into
In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix OOB in free_rd_atomic_resources() free_rd_atomic_resources() iterates using qp->attr.max_dest_rd_atomic. Updating max_dest_rd_atomic before freeing the old array can make the free path walk past the old allocation and trigger a slab out-of-bounds write catched by KASAN: ================================================================== BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resource drivers/infiniband/sw/rxe/rxe_qp.c:180 [inline] BUG: KASAN: slab-out-of-bounds in free_rd_atomic_resources drivers/infiniband/sw/rxe/rxe_qp.c:171 [inline] BUG: KASAN: sla
In the Linux kernel, the following vulnerability has been resolved: usb: xhci: bail out of setup if the controller is inaccessible xhci_gen_setup() locates the operational registers using the capability length read from the very first register: xhci->op_regs = hcd->regs + HC_LENGTH(readl(&xhci->cap_regs->hc_capbase)); If the controller is dead or has dropped off the bus, that read returns ~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes past the page-aligned MMIO base, i.e. unaligned. The first access through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is then an unaligned readl() on device memory.
In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on setattr writeback failure fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate (fault_blocked = true) and releases it at the out:/error: labels. But when a writeback flush is also needed, a write_inode_now() failure returns directly and leaks the lock, so any later fault or truncate on the file stalls on the stale rwsem. For example, truncate(2) on a setuid file reaches fuse_do_setattr() with both ATTR_SIZE and ATTR_MODE set: truncate(2) └─ do_truncate() ├─ dentry_needs_remove_privs() # S_ISUID └─ no
In the Linux kernel, the following vulnerability has been resolved: fuse: fix invalidate lock leak on open O_TRUNC DAX failure fuse_open() takes filemap_invalidate_lock() for a DAX truncate (dax_truncate = true) and releases it before the out_inode_unlock label. But when fuse_dax_break_layouts() fails, the goto out_inode_unlock skips the unlock and leaks the rwsem, so any later fault or truncate on the file stalls on the stale lock. fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal interrupts the wait for busy DAX pages to drain: open("file", O_RDWR | O_TRUNC) └─ fuse_open() ├─ filemap_invalidate_lock() #
In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: keep port count until LUN teardown completes tcm_usbg_drop_nexus() permits session removal once tpg_port_count reaches zero. However, usbg_port_unlink() currently decrements that count from the fabric_pre_unlink() callback, before core_dev_del_lun() waits for active se_lun references to drain. If removal of the last LUN races a nexus removal, the latter can observe a zero port count and call target_remove_session(). This frees sess_cmd_map while an in-flight struct usbg_cmd, including its work item, can still be accessed. Overlapping the last-LUN unlin
In the Linux kernel, the following vulnerability has been resolved: tls: device: fix out-of-bounds write in tls_append_frag() Found with syzkaller and a local syzbot instance running on top of a netdevsim TLS offload emulation; tls_device.c is otherwise only reachable on a machine with a NIC that implements the offload. tls_push_data() only checks whether the open record still has room for another frag at the bottom of its loop, and the MSG_MORE early break skips that check. The record survives to the next syscall with the frag count it already had, and tls_append_frag() does not check either, so with TLS_TX_ZEROCOPY_RO every splice(SPLIC
In the Linux kernel, the following vulnerability has been resolved: gtp: serialize PDP context updates PDP contexts can be deleted through GTP_CMD_DELPDP or while the GTP network device is being unregistered. The latter is serialized by RTNL, but the generic-netlink delete path only holds RCU. Running both paths concurrently can therefore make both paths delete the same PDP context. The issue was found through static analysis and reproduced on a KASAN-enabled kernel by a simple two-thread program racing GTP_CMD_DELPDP against RTM_DELLINK: Oops: general protection fault, probably for non-canonical address KASAN: maybe wild-memory-acces
In the Linux kernel, the following vulnerability has been resolved: tcp: fix AO info use-after-free in tcp_ao_connect_init() tcp_v4_connect() adds a SYN-SENT socket to the ehash before calling tcp_connect(). If TCP-AO is configured, tcp_connect() first verifies that a key matches the peer and the bound device's current L3 master. tcp_ao_connect_init() later resolves the L3 master again and removes keys which do not match it. The socket lock does not stabilize the bound device's VRF membership. Detaching the device from its VRF between the initial validation and the L3-master calculation in tcp_ao_connect_init() can therefore make the vali
In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: fix use-after-free of current_key on reconnect to another peer tcp_inbound_ao_hash() is called before bh_lock_sock_nested() is taken, with only rcu_read_lock() held. On the fast path for established sockets, if the rnext_keyid sent by the peer differs from current_key->sndid, the key the peer asked for is looked up and stored in current_key. The lookup is inside the RCU read side, but current_key outlives it. When the socket is disconnected and connect() is called again for another peer, tcp_ao_connect_init() unlinks every key that does not match the new peer a
In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: fix UAF during close ZDI reported and analyzed a race condition during close for espintcp sockets: espintcp_close() frees emsg->skb via kfree_skb() without holding any socket lock. Concurrently, the xfrm_trans_reinject work queue invokes esp_output_tcp_finish() -> espintcp_push_skb() -> espintcp_push_msgs() -> skb_send_sock_locked(), which reads the same skb as a data source. Fix this by adding a synchronize_rcu() call after resetting sk_prot, since esp_output_tcp_finish() runs under RCU and won't use a socket with sk_prot == &tcp_prot.
In the Linux kernel, the following vulnerability has been resolved: tcp: clamp route advmss to TCP_MIN_MSS tcp_select_initial_window() assumes that callers never pass an MSS smaller than 1, but route-derived advmss values can violate that assumption. A too-small explicit RTAX_ADVMSS is one way to get there, but it is not the only one. The same divide-by-zero can also be reached through the "default advmss" path when RTAX_ADVMSS is left at 0 and the effective advmss is later driven down by route MTU and min_adv_mss. Introduce a tcp_dst_advmss() helper that clamps route advmss to TCP_MIN_MSS before TCP consumes it, and use it in the TCP pat
Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.