p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux-gkeop · Seite 24

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-gkeop: 592. Davon im KEV-Katalog: 0.

Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 10669

  1. CVE-2026-98370

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    xfrm: fix compat ALLOCSPI request use-after-free

    In the Linux kernel, the following vulnerability has been resolved: xfrm: fix compat ALLOCSPI request use-after-free xfrm_state_netlink() builds the ALLOCSPI response with dump_one_state(), which already calls alloc_compat() with the response skb and header. xfrm_alloc_userspi() then calls alloc_compat() again, but passes the original request skb and its header. For a compat request, the translator therefore interprets the 228-byte compat xfrm_userspi_info as the 232-byte native layout and reads four bytes past the declared payload. It also publishes the translated child through the request's frag_list. A multicast clone of the request sh

    Veröffentlicht Aktualisiert
  2. CVE-2026-98369

    Hoch · CVSS 7.8EPSS 0,14%Keine Korrektur veröffentlicht

    xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject()

    In the Linux kernel, the following vulnerability has been resolved: xfrm: add missing rcu_read_lock(), skb_dst_force() and dev_hold() for xfrm_trans_reinject() syzbot reported a suspicious RCU usage warning in ip6_pkt_drop(): WARNING: suspicious RCU usage in ip6_pkt_drop include/net/addrconf.h:389 suspicious rcu_dereference_check() usage! Call Trace: __in6_dev_get_safely include/net/addrconf.h:389 [inline] ip6_pkt_drop+0x596/0x610 net/ipv6/route.c:4620 ip6_pkt_discard+0x1c/0x30 net/ipv6/route.c:4651 xfrm_trans_reinject+0x324/0x630 net/xfrm/xfrm_input.c:806 process_one_work kernel/workqueue.c:3322 [inline] process_s

    Veröffentlicht Aktualisiert
  3. CVE-2026-98367

    Hoch · CVSS 7.8EPSS 0,12%Keine Korrektur veröffentlicht

    RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept

    In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Clear association under lock if siw_qp_modify fails in siw_accept We need to clear cep before release state_lock as siw_qp_llp_close and siw_qp_modify->siw_qp_llp_close did. Otherwise if siw_qp_modify() fails in siw_accept(), the QP's state_lock is released before the error path cleanup. A concurrent ibv_modify_qp() transitioning the QP to ERROR can race in this window: siw_accept() ibv_modify_qp(ERROR) ---------------------- ---------------------- siw_qp_modify() fails up_write(&qp->state_lock)

    Veröffentlicht Aktualisiert
  4. CVE-2026-98365

    Kritisch · CVSS 9.8EPSS 0,38%Keine Korrektur veröffentlicht

    RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access

    In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix integer overflow in mr_check_range() leading to OOB access mr_check_range() validates that [iova, iova+length) falls within the registered MR range using wraparound-prone arithmetic: if (iova < mr->ibmr.iova || iova + length > mr->ibmr.iova + mr->ibmr.length) A remote peer can craft an RDMA-Write/Read RETH so that iova + length wraps to 0 (e.g. iova=0xfffffffffffffff8, length=8), bypassing the check. rxe_mr_iova_to_index() then computes a huge index (int idx, only guarded by WARN_ON) and rxe_mr_copy_xarray() dereferences mr->page_info[huge], caus

    Veröffentlicht Aktualisiert
  5. CVE-2026-98364

    Hoch · CVSS 7.8EPSS 0,12%Keine Korrektur veröffentlicht

    xfrm: hold net_device reference under RCU in bundle creation

    In the Linux kernel, the following vulnerability has been resolved: xfrm: hold net_device reference under RCU in bundle creation xfrm_bundle_create() and xfrm_create_dummy_bundle() read dst->dev into a local pointer without taking a device reference, then pass it to xfrm_fill_dst(). A concurrent RTM_DELLINK replaces dst->dev via dst_dev_put() and frees the old net_device, causing a use-after-free when xfrm6_fill_dst() later dereferences the stale dev pointer. BUG: KASAN: slab-use-after-free in xfrm6_fill_dst+0x82c/0x860 (net/ipv6/xfrm6_policy.c:86 netdev_hold()) Read of size 8 at addr ffff8880142fe588 by task exploit/153 Call Trace

    Veröffentlicht Aktualisiert
  6. CVE-2026-98363

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS

    In the Linux kernel, the following vulnerability has been resolved: firmware: arm_scpi: reject DVFS OPP count above MAX_DVFS_OPPS scpi_dvfs_get_info() already rejected a zero opp_count, but still trusted any larger value from the SCP firmware. The shared-memory reply only holds MAX_DVFS_OPPS entries in buf.opps[]; a bigger count over-reads that array and then sizes the allocated OPP table incorrectly (garbage OPPs / OOB). The missing upper bound dates back to the original SCPI DVFS support. Reject zero and out-of-range counts in one check and return -EINVAL.

    Veröffentlicht Aktualisiert
  7. CVE-2026-98362

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate

    In the Linux kernel, the following vulnerability has been resolved: clk: scpi: bound-check DVFS index in scpi_dvfs_recalc_rate dvfs_get_idx() may return an out-of-range index if the SCP firmware is buggy or returns a stale value. Only negative indexes were rejected, so a large index walked past info->opps and could treat garbage as a clock rate (KASAN OOB / wrong frequency to consumers). The missing upper bound dates back to the original SCPI clock driver. Treat indexes >= opp count as invalid and return 0, same as idx < 0.

    Veröffentlicht Aktualisiert
  8. CVE-2026-98359

    Hoch · CVSS 7EPSS 0,12%Keine Korrektur veröffentlicht

    RDMA/core: Reject unregistering netdevs in ib_get_eth_speed

    In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Reject unregistering netdevs in ib_get_eth_speed ib_device_get_netdev() intentionally returns a referenced net_device even when it is unregistering, so matching and cleanup callers can still find the association. The reference keeps struct net_device allocated, but does not guarantee that the device remains operational. ib_get_eth_speed() uses the returned device operationally by invoking its ethtool callback. Although that call is made under RTNL, the function does not verify the registration state first. An asynchronous RDMA port query can therefore call into

    Veröffentlicht Aktualisiert
  9. CVE-2026-98358

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    IB/iser: reject a remote invalidation of an unregistered direction

    In the Linux kernel, the following vulnerability has been resolved: IB/iser: reject a remote invalidation of an unregistered direction A write command whose data is sent entirely as immediate data is not registered. iser_reg_mem_fastreg() takes the DMA key path and leaves rdma_reg[ISER_DIR_OUT].desc at NULL, while iser_dma_map_task_data() has already set dir[ISER_DIR_OUT]. iser_check_remote_inv() looks at dir[] alone and hands the descriptor to iser_inv_desc(), which reads desc->sig_protected. A target that answers such a command with IB_WR_SEND_WITH_INV faults the initiator. Leaving those commands unregistered is deliberate. The same f

    Veröffentlicht Aktualisiert
  10. CVE-2026-98357

    Hoch · CVSS 8.1EPSS 0,35%Keine Korrektur veröffentlicht

    IB/isert: wait for deferred control PDU completions before releasing the connection

    In the Linux kernel, the following vulnerability has been resolved: IB/isert: wait for deferred control PDU completions before releasing the connection isert_send_done() hands ISTATE_SEND_TASKMGTRSP, ISTATE_SEND_REJECT and ISTATE_SEND_TEXTRSP completions off to isert_comp_wq and returns. The work item then runs isert_completion_put() -> isert_put_cmd(), which reads isert_conn->conn and takes conn->cmd_lock. Nothing orders that work item against teardown. isert_wait_conn() queues isert_release_work, which frees isert_conn, and iscsit_close_connection() frees the iscsit_conn right after it returns, so the queued work can run against freed

    Veröffentlicht Aktualisiert
  11. CVE-2026-98354

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    RDMA/mad: Fix receive buffer leak when PKey enforcement fails

    In the Linux kernel, the following vulnerability has been resolved: RDMA/mad: Fix receive buffer leak when PKey enforcement fails ib_mad_complete_recv() initializes mad_recv_wc->rmpp_list and then runs ib_mad_enforce_security() before linking recv_buf onto that list. On failure it calls ib_free_recv_mad(), which only walks rmpp_list and frees the ib_mad_private of every buffer found there. As the list is still empty at that point, nothing is freed at all. The caller cannot clean up either: ib_mad_recv_done() sets recv to NULL right after ib_mad_complete_recv() returns, assuming the MAD layer took ownership of the buffer. Every MAD that

    Veröffentlicht Aktualisiert
  12. CVE-2026-98352

    Nicht bewertetEPSS 0,16%Keine Korrektur veröffentlicht

    RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted

    In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted The client borrows shared CQ credits in the ADDR_RESOLVED handler via ib_cq_pool_get(), before the peer is connected. create_cm() can return -ERESTARTSYS from wait_event_interruptible_timeout() without destroying the CM ID. The init_conns() and stop-and-destroy paths then call destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards rdma_destroy_id(). CMA serializes the handler against rdma_destroy_id() with handler_mutex, but that does not order the GET against destroy_con_cq_qp(). If ADDR_RESOLVED

    Veröffentlicht Aktualisiert
  13. CVE-2026-98351

    Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht

    wifi: virt_wifi: free skb when disconnected

    In the Linux kernel, the following vulnerability has been resolved: wifi: virt_wifi: free skb when disconnected When the simulated link is disconnected, virt_wifi_start_xmit() returns NET_XMIT_DROP without freeing the skb. dev_hard_start_xmit() treats this return value as consumed, so every packet sent while disconnected leaks its skb. Free the skb before returning the drop status.

    Veröffentlicht Aktualisiert
  14. CVE-2026-98349

    Hoch · CVSS 7.1EPSS 0,25%Keine Korrektur veröffentlicht

    wifi: libipw: reject too-short beacon and probe responses

    In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short beacon and probe responses libipw_process_probe_response() and the libipw_network_init() call it makes assume the frame contains the full 36-byte beacon and probe response prefix, but the ipw2100 and ipw2200 receive paths only establish that a management frame carries the generic 24-byte three-address header. libipw_network_init() then computes the information element length as stats->len - sizeof(*beacon) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Trunc

    Veröffentlicht Aktualisiert
  15. CVE-2026-98348

    Hoch · CVSS 7.1EPSS 0,25%Keine Korrektur veröffentlicht

    wifi: libipw: reject too-short association responses

    In the Linux kernel, the following vulnerability has been resolved: wifi: libipw: reject too-short association responses libipw_handle_assoc_resp() reads the capability, status and aid fields of the 30-byte association response prefix and then computes the information element length as stats->len - sizeof(*frame) stats->len is a u16 and sizeof() has type size_t, so the subtraction is evaluated as size_t and wraps instead of going negative. Truncating that to the u16 length parameter of libipw_parse_info_param() turns a frame shorter than the fixed fields into a length near 64 KiB, and the parser then reads past the receive buffer. Both

    Veröffentlicht Aktualisiert
  16. CVE-2026-98347

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    IB/IPoIB: Avoid restoring OPER_UP after multicast flush

    In the Linux kernel, the following vulnerability has been resolved: IB/IPoIB: Avoid restoring OPER_UP after multicast flush ipoib_ib_dev_flush_light() temporarily clears IPOIB_FLAG_OPER_UP to prevent multicast joins while ipoib_mcast_dev_flush() is running, and restores the flag afterwards if it was previously set. This restore races with ipoib_ib_dev_down(). If the interface is brought down while the flush is in progress, ipoib_ib_dev_down() clears IPOIB_FLAG_OPER_UP, but the flush path may set it again after the device has already gone down. Since commit 894021a75291 ("IB/ipoib: Make the carrier_on_task race aware"), ipoib_mcast_carrier

    Veröffentlicht Aktualisiert
  17. CVE-2026-98345

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    wifi: cfg80211: check IP header size in cfg80211_classify8021d()

    In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: check IP header size in cfg80211_classify8021d() A frame that looks like IP can be transmitted, but be too short, so the DS field is read incorrectly: BUG: KMSAN: uninit-value in cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 cfg80211_classify8021d+0x99d/0x12b0 net/wireless/util.c:1027 ieee80211_select_queue+0x37a/0x9e0 net/mac80211/wme.c:180 __ieee80211_subif_start_xmit+0x60f/0x1d90 net/mac80211/tx.c:4304 ieee80211_subif_start_xmit+0xa8/0x6d0 net/mac80211/tx.c:4538 ... packet_sendmsg+0x9173/0xa2a0 net/packet/af_packet.c:31

    Veröffentlicht Aktualisiert
  18. CVE-2026-98344

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    dmaengine: Fix device kref underflow in dma_chan_put()

    In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix device kref underflow in dma_chan_put() dma_chan_get() takes chan->device->ref only on the slow path: /* no kref on fast path */ if (chan->client_count) { __module_get(owner); chan->client_count++; return 0; } if (!try_module_get(owner)) return -ENODEV; if (!dma_device_get(chan->device)) { // calls kref_get_unless_zero() dma_chan_put() drops the ref unconditionally, so every fast-path get/put pair drops one extra device reference. The bug fires when two conditions hold together: a non-private provider has a persistent client holding chan->clie

    Veröffentlicht Aktualisiert
  19. CVE-2026-98343

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel()

    In the Linux kernel, the following vulnerability has been resolved: dmaengine: fix use-after-free in dma_chan_put() and dma_release_channel() When dma_device_put() drops the last reference on chan->device->ref, dma_device_release() runs and may free the dma_device along with its channels. dma_chan_put() then still reads chan->device->owner via dma_chan_to_owner() for the trailing module_put(). KASAN catches it: slab-use-after-free in dma_chan_put+0x3e6/0x4c0 Read of size 8 by task insmod/6319 Freed by task 6319: kfree+0x225/0x470 dma_chan_put+0x395/0x4c0 dmaengine_put+0xf8/0x160 Cache the module owner in dma_chan_put() before

    Veröffentlicht Aktualisiert
  20. CVE-2026-98342

    Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht

    dmaengine: wait for RCU readers before releasing dma_device

    In the Linux kernel, the following vulnerability has been resolved: dmaengine: wait for RCU readers before releasing dma_device dma_issue_pending_all() walks the dma_device_list with list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release() unlinks the device with list_del_rcu() and then calls device->device_release() (which in many drivers, such as plx_dma.c, directly calls kfree()). Because there is no grace period between unlinking the device and freeing it, concurrent RCU readers in dma_issue_pending_all() can access the device after it has been freed. The lockless walk originally relied on clients holding a dmaengine refe

    Veröffentlicht Aktualisiert

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →