In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: cancel card-detect work on remove
Disabling the device interrupt and freeing the IRQ prevents new card-detect
work from being queued, but carddet_work already queued by the handler can
still run after via_sd_remove() returns. via_sdc_card_detect() recovers the
host through container_of() and dereferences its MMIO base; once remove()
returns the host can be freed, so that work would touch freed memory.
Cancel carddet_work after freeing the IRQ and before cancelling
finish_bh_work, which the card-detect handler can also queue. carddet_work
can re-enable the i
mmc: via-sdmmc: stop card-detect handling on probe failure
In the Linux kernel, the following vulnerability has been resolved:
mmc: via-sdmmc: stop card-detect handling on probe failure
request_irq() registers the SD card-detect interrupt and the probe enables
it before mmc_add_host() runs. If mmc_add_host() fails, the error path only
unmaps the registers and returns: the interrupt stays registered, so the
handler keeps running against the host once it is freed. via_sdc_isr()
dereferences sdhost and its MMIO base and schedules carddet_work, which
via_sdc_card_detect() also runs against freed memory through its
container_of() dereference.
Add a probe-error path that disables and frees the interrupt
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
platform/x86: ISST: Add a NULL check for sst_inst[]
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Add a NULL check for sst_inst[]
To be consistent with other places, add a NULL check for failed socket
loading by checking isst_common.sst_inst[].
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
platform/x86: ISST: Validate logical CPU id and clos id
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Validate logical CPU id and clos id
Validate max CLOS ID and logical CPU ID for core power feature.
Reject any clos level or logical CPU number greater than the
supported maximum. These are used to calculate MMIO offset.
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
platform/x86: int1092: Fix potential memory leak in sar_probe()
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: int1092: Fix potential memory leak in sar_probe()
The memory allocated for device_mode_info in parse_package() called by
sar_get_data() is not freed in some of the error paths in sar_probe().
Fix that by converting to use device managed allocations.
platform/chrome: sensorhub: Bound the EC-reported sensor number
In the Linux kernel, the following vulnerability has been resolved:
platform/chrome: sensorhub: Bound the EC-reported sensor number
Each EC FIFO event carries an 8-bit sensor number (in->sensor_num).
cros_ec_sensorhub_ring_handler() validates the FIFO event count, the
per-read count and the ring bound, but not the sensor number, which
cros_ec_sensor_ring_process_event() then uses unchecked to index
sensorhub->batch_state[] - allocated with only sensorhub->sensor_num
entries. A sensor number of sensor_num or larger is an out-of-bounds
read and write of batch_state[].
Validate the sensor number in the ring handler, where each event is read
f
platform/x86/amd/pmc: Propagate SMU errors and validate S2D address
In the Linux kernel, the following vulnerability has been resolved:
platform/x86/amd/pmc: Propagate SMU errors and validate S2D address
amd_stb_s2d_init() discards the return value of several S2D SMU commands.
When the SMU refuses a command (e.g. "SMU cmd failed. err: 0xff") the
failure is only noticed indirectly - if at all - and reported as -EIO,
masking the real error.
More seriously, the S2D_PHYS_ADDR_LOW/HIGH return values are ignored, so
on failure phys_addr_low/hi are left uninitialised and the assembled
address is passed straight to devm_ioremap(). When the SMU leaves them at
zero this maps physical address 0 and trips the ioremap
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store()
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read in sk_store() and kek_store()
sk_store() and kek_store() strip a trailing newline from the sysfs
write before allocating the key buffer:
length = count;
if (buf[length - 1] == '\n')
length--;
bioscfg_drv.spm_data.signing_key = kmemdup(buf, length, GFP_KERNEL);
but then pass the original "count" (not "length") as the copy size to
hp_wmi_perform_query(), which memcpy()s that many bytes out of the
"length"-sized allocation, reading one byte past it whenever the write
ends in a newline, the normal case for a shell "echo" into s
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
platform/x86: hp-bioscfg: fix heap OOB read on empty password write
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix heap OOB read on empty password write
validate_password_input() computes length = strlen(buf) and then
checks buf[length - 1] to strip a trailing newline, without checking
that length is nonzero first. Writing an empty string (a bare '\n')
to current_password or new_password gives length == 0, and
buf[length - 1] reads buf[-1], one byte before the heap allocation
holding the copied input.
KASAN confirms this directly:
BUG: KASAN: slab-out-of-bounds in store_password_instance.constprop.0+0x223/0x2a0 [hp_bioscfg]
Read of size 1 at addr ffff
platform/x86: hp-bioscfg: fix off-by-one write in hp_get_string_from_buffer()
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: fix off-by-one write in hp_get_string_from_buffer()
hp_get_string_from_buffer() clamps the converted string length against
the destination buffer size with "size > dst_size", so when the
converted length is exactly equal to dst_size, conv_dst_size is left
at dst_size and the unconditional NUL terminator write
dst[conv_dst_size] = 0;
lands one byte past the destination buffer. This is the same shape of
bug as the previously fixed off-by-one in hp_convert_hexstr_to_str():
the buffer is sized correctly for the content, but the terminator
write is n
platform/x86: hp-bioscfg: pass validated element count to package parsers
In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: pass validated element count to package parsers
The per-type package parsers are handed the wrong element count.
hp_init_bios_package_attribute() validates obj->package.count and then
calls one of the five hp_populate_*_package_data() wrappers (string,
integer, enumeration, ordered list, password). Each wrapper forwards a
count to its hp_populate_*_elements_from_package() parser, but instead
of forwarding the validated obj->package.count it derives the count
from elements[0]. elements[0] is the NAME field and is always an
ACPI_TYPE_STRING, so read
In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: honor task_work cancellation
io_waitid_cb() may run through the fallback task_work path when
task_work_add() can no longer queue work to the originating task. The
fallback runs from a kworker and io_uring marks such task work as
canceled through tw.cancel.
io_waitid_cb() currently ignores tw.cancel and calls __do_wait().
waitid is task-context dependent: __do_wait() performs child lookup
relative to current, and the retry path also uses
current->signal->wait_chldexit. If the callback runs from the fallback
kworker, current is therefore not the task that su
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In the Linux kernel, the following vulnerability has been resolved:
interconnect: Fix use after free in icc_get() and of_icc_get_by_index()
In of_icc_get_by_index() and icc_get(), if the dynamic allocation for
path->name fails via kasprintf(), the error handling path directly
calls kfree(path) to free the path object and returns an error.
However, prior to this point, path_find() calls path_init(), which
already links the path's requests into the req_list of the respective
interconnect nodes via hlist_add_head(). Directly invoking kfree(path)
leaves dangling pointers in the hlist. A subsequent call to icc_get()
or icc_set_bw() will travers
In the Linux kernel, the following vulnerability has been resolved:
ipmi: ipmb: validate write message length
ipmb_write() read message fields before validating the length byte.
A zero or short write can read uninitialized stack bytes.
A length smaller than the SMBus header underflows the block write length.
Require a non-empty buffer and the minimum IPMB request length.
Also require the length byte plus payload before parsing the message.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
ipmi: si: Fix NULL pointer dereference after failed registration
In the Linux kernel, the following vulnerability has been resolved:
ipmi: si: Fix NULL pointer dereference after failed registration
try_smi_init() allocates new_smi->si_sm and later calls
ipmi_register_smi_mod(), which maps to ipmi_add_smi().
During ipmi_add_smi(), the upper IPMI message handler obtains the
initial BMC device information through __bmc_get_device_id(). This can
fail if the BMC does not return a successful response to the Get Device
ID command.
When the BMC returns a nonzero completion code, the device-id helper
retries the command and eventually returns -EIO if the device ID still
cannot be fetched.
On this failure path,
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
In the Linux kernel, the following vulnerability has been resolved:
net/iucv: filter frames in afiucv_hs_rcv() by ingress device
afiucv_hs_rcv() selects a socket from iucv_sk_list by matching four 8-byte
name fields in the transport header alone. No check is made against the
net_device the frame arrived on.
This can cause a frame arriving on any netdev to be delivered to an AF_IUCV
socket. Three problems follow.
First, a frame arriving over HiperSockets can be delivered to a socket
bound to the classic z/VM IUCV transport, which has iucv->hs_dev == NULL.
iucv_sock_bind() takes the classic path whenever the requested userid
matches iucv_us
In the Linux kernel, the following vulnerability has been resolved:
xdp: fix zero-copy frame layout
xdp_convert_zc_to_xdp_frame() clones an XSK packet into an order-0 page
and advertises PAGE_SIZE as its frame size. It allows the copied frame
to occupy the page tail needed by skb_shared_info and records zero
headroom even when metadata separates the frame header from packet data.
An AF_XDP zero-copy packet redirected through cpumap can therefore make
the skb overlap skb_shared_info or place it beyond the allocated page.
Limit the copied layout to SKB_WITH_OVERHEAD(PAGE_SIZE) and include the
metadata length in frame headroom. Redirect cal
In the Linux kernel, the following vulnerability has been resolved:
slip: fix use-after-free in sl_sync()
slip_devs[] stores bare net_device pointers and takes no reference on
them. sl_sync() and sl_alloc() walk that table from slip_open() under
rtnl_lock(), while an entry is dropped by sl_free_netdev(), which
sl_setup() installs as dev->priv_destructor.
priv_destructor is called from netdev_run_todo(), which deliberately
runs with the RTNL semaphore released so that it can sleep while waiting
for the device refcount to drop:
/* Snapshot list, allow later requests */
list_replace_init(&net_todo_list, &list);
__rtnl_unlock();
...
i
In the Linux kernel, the following vulnerability has been resolved:
net: tun: bound receive headroom
tun_get_user() uses tun->align both as skb headroom and when choosing how
much packet data to keep linear. OVS can propagate an oversized headroom
request from another port to TUN or TAP.
When align is larger than the usable space in a one-page skb head,
SKB_MAX_HEAD(align) underflows and the result becomes negative when stored
in good_linear. That value later wraps when assigned to the size_t linear
variable, and tun_alloc_skb() can place skb->data outside the allocated
head.
Bound the headroom stored by TUN to the one-page skb-head budge
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
In the Linux kernel, the following vulnerability has been resolved:
net: dsa: realtek: use gpiod_set_value_cansleep for reset GPIO
rtl83xx_reset_assert() and rtl83xx_reset_deassert() are only called from
the probe path, which may sleep and is not timing-critical. When the
reset GPIO is provided by a sleeping controller such as an I2C I/O
expander, gpiod_set_value() warns:
WARNING: drivers/gpio/gpiolib.c:4030 at gpiod_set_value+0x44/0x80, CPU#1: kworker/u16:4/61
Hardware name: B&O MAP CA33 Rev f (UNKNOWN) (DT)
Workqueue: events_unbound deferred_probe_work_func
pc : gpiod_set_value+0x44/0x80
lr : rtl83xx_probe+0x1d8/0x3a0
Call t