p PatchFirst

PatchFirst · Aktuelle Sicherheitslücken

Sicherheitslücken in linux-lowlatency-hwe-5.19 · Seite 100

In den letzten 30 Tagen veröffentlichte Sicherheitslücken für linux-lowlatency-hwe-5.19: 1054. Davon im KEV-Katalog: 0.

RSS ↗ JSON ↗
Sicherheitslücken filtern
Filter zurücksetzen

Sicherheitslücken: 18866

  1. CVE-2026-90338

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    serial: amba-pl011: keep console clock enabled for atomic writes

    In the Linux kernel, the following vulnerability has been resolved: serial: amba-pl011: keep console clock enabled for atomic writes pl011_console_write_atomic() runs from nbcon atomic context, where sleeping is not allowed. It calls clk_enable(), which takes the common-clk enable_lock. Under PREEMPT_RT that is a sleeping lock: clk_enable_lock() first tries spin_trylock_irqsave(), but on contention falls back to spin_lock_irqsave(). Therefore, an atomic-context printk on an RT kernel with a clk-backed pl011 can trip: BUG: sleeping function called from invalid context at spinlock_rt.c:48 __might_resched from rt_spin_lock rt_spin_l

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  2. CVE-2026-90337

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    serial: core: do fallible allocations before the console can be registered

    In the Linux kernel, the following vulnerability has been resolved: serial: core: do fallible allocations before the console can be registered serial_core_add_one_port() allocates uport->tty_groups after uart_configure_port(), which may register the console. If the allocation fails, the driver unwinds the port while its console remains registered. The earlier uport->name allocation has a related failure path that leaves state->uart_port linked to a port being freed. Failslab reproduced a NULL dereference in PL011 console output and a KASAN use-after-free in i.MX console output after failed binds. Allocate the name and tty_groups before li

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  3. CVE-2026-90336

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    serial: core: clear freed pointers on uart_register_driver() failure

    In the Linux kernel, the following vulnerability has been resolved: serial: core: clear freed pointers on uart_register_driver() failure uart_register_driver() leaves drv->state pointing to freed memory when tty_alloc_driver() fails. If tty_register_driver() fails, drv->tty_driver also retains a pointer after its reference is dropped. Drivers that use drv->state as an "already registered" flag can then skip registration on the next probe and pass the freed state to uart_add_one_port(). This issue was found with failslab on QEMU's raspi1ap board by failing registration and binding the PL011 port again. Clear both pointers on their failure

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  4. CVE-2026-90335

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    tty: skip cdev_del() when no cdev is registered

    In the Linux kernel, the following vulnerability has been resolved: tty: skip cdev_del() when no cdev is registered TTY device registration can fail before a cdev is allocated. Serial core keeps the port so setserial can still use it, and later removal passes the NULL cdev slot to cdev_del(), causing a NULL-pointer dereference. Only delete the cdev when the slot is not NULL.

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  5. CVE-2026-90334

    Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht

    tty: clear cdev pointer after cdev_add() failure

    In the Linux kernel, the following vulnerability has been resolved: tty: clear cdev pointer after cdev_add() failure tty_cdev_add() drops the cdev reference when cdev_add() fails, but leaves driver->cdevs[index] pointing to freed memory. tty_unregister_device() later passes that stale pointer to cdev_del(), causing a use-after-free. Clear the slot after dropping the reference.

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  6. CVE-2026-90333

    Mittel · CVSS 5.1EPSS 0,17%Keine Korrektur veröffentlicht

    dm-integrity: replace forgeable discard filler with a keyed sector marker

    In the Linux kernel, the following vulnerability has been resolved: dm-integrity: replace forgeable discard filler with a keyed sector marker The discard-block check in dm_integrity_rw_tag() treats a stored tag of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and skips HMAC verification. allow_discards is only accepted in dm-integrity's standalone mode. An attacker with raw write access to the backing device, but without the integrity key, can stamp any block with an all-0xf6 tag and have it served as authentic. Add a new "allow_discards_keyed" target argument that marks discarded blocks with a keyed checksum of (salt || s

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  7. CVE-2026-90332

    Hoch · CVSS 8.2EPSS 0,27%Keine Korrektur veröffentlicht

    PCI: dwc: ep: Flush cached MSI write before unmapping the iATU

    In the Linux kernel, the following vulnerability has been resolved: PCI: dwc: ep: Flush cached MSI write before unmapping the iATU The MSI-X path already flushes any posted MSI-X write before tearing down its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep: Flush MSI-X write before unmapping its ATU entry") to make sure the write reaches the Root Complex before the outbound window that translates it disappears. The MSI path has the same problem but no equivalent flush. When the Endpoint driver caches an MSI target address and later observes that the Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the exist

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  8. CVE-2026-90331

    Nicht bewertetEPSS 0,2%Keine Korrektur veröffentlicht

    HID: asus: refactor the two workqueues and init sequence

    In the Linux kernel, the following vulnerability has been resolved: HID: asus: refactor the two workqueues and init sequence Multiple issues have been found within the hid-asus driver: - unchecked size in asus_raw_event() - unclean teardown of asus_probe on failure - possible use-after-free in asus_probe - multiple workqueue used for jobs where one was enough - sleeping calls in atomic context - packets of incorrect size being sent to the keyboard controller Join the two workqueues into one reusing the stopping mechanism of the brightness workqueue, use the joined workqueue to also move the asus_wmi_send_event() sleeping call away from ato

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  9. CVE-2026-90330

    Mittel · CVSS 4.1EPSS 0,21%Keine Korrektur veröffentlicht

    HID: logitech-hidpp: Fix FF device cleanup on init failure

    In the Linux kernel, the following vulnerability has been resolved: HID: logitech-hidpp: Fix FF device cleanup on init failure hidpp_ff_init() creates the input force-feedback device with input_ff_create(), then allocates the HID++ FF private data, effect ID array, and workqueue. If any of those allocations fail after input_ff_create() succeeds, the function returns an error without destroying the FF device. Add an unwind path that frees the private allocations made by hidpp_ff_init() and calls input_ff_destroy() for failures after input_ff_create() succeeds.

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  10. CVE-2026-90329

    Hoch · CVSS 8.8EPSS 0,34%Keine Korrektur veröffentlicht

    HID: synchronize input before cleaning up a failed probe

    In the Linux kernel, the following vulnerability has been resolved: HID: synchronize input before cleaning up a failed probe hid_device_io_start() allows reports to run concurrently with probe. If the probe subsequently fails, __hid_device_probe() releases driver resources and clears hdev->driver without first excluding those report callbacks. For example, a report may enter hidraw_report_event() while the failure path frees the associated hidraw object, leading to a use-after-free when the report takes the object's list lock. Stop input before performing failed-probe cleanup. This reacquires driver_input_lock and waits for any report cal

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  11. CVE-2026-90328

    Niedrig · CVSS 2.4EPSS 0,21%Keine Korrektur veröffentlicht

    HID: steam: Reject short reads

    In the Linux kernel, the following vulnerability has been resolved: HID: steam: Reject short reads Steam Controller FEATURE reports encode the size of the message in the message itself. Previously we were trusting that the size reported matched the size we actually read, leading to a potential issue with short reads. Instead, we should actually verify the length of the read.

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  12. CVE-2026-90327

    Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht

    phonet: pep: do not write beyond optlen in getsockopt

    In the Linux kernel, the following vulnerability has been resolved: phonet: pep: do not write beyond optlen in getsockopt pep_getsockopt() clamps the reported length to the caller's buffer with min_t(), but then stores the value with put_user(val, (int __user *) optval), which always writes sizeof(int) bytes. A getsockopt() call with an optlen smaller than sizeof(int) thus reports the clamped length yet writes a full int, one to three bytes past the user buffer. Write the value with copy_to_user() bounded by len, so at most optlen bytes are copied, matching the length reported back to userspace.

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  13. CVE-2026-90326

    Hoch · CVSS 7.8EPSS 0,17%Keine Korrektur veröffentlicht

    blk-cgroup: fix race between policy activation and blkg destruction

    In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix race between policy activation and blkg destruction When switching an IO scheduler on a block device, blkcg_activate_policy() allocates blkg_policy_data (pd) for all blkgs attached to the queue. However, blkcg_activate_policy() may race with concurrent blkcg deletion, leading to use-after-free and memory leak issues. The use-after-free occurs in the following race: T1 (blkcg_activate_policy): - Successfully allocates pd for blkg1 (loop0->queue, blkcgA) - Fails to allocate pd for blkg2 (loop0->queue, blkcgB) - Enters the enomem rollback path to releas

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  14. CVE-2026-90325

    Hoch · CVSS 7.8EPSS 0,16%Keine Korrektur veröffentlicht

    blk-cgroup: skip dying blkg in blkcg_activate_policy()

    In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: skip dying blkg in blkcg_activate_policy() When switching IO schedulers on a block device, blkcg_activate_policy() can race with concurrent blkcg deletion, leading to a use-after-free in rcu_accelerate_cbs. T1: T2: blkg_destroy kill(&blkg->refcnt) // blkg->refcnt=1->0 blkg_release // call_rcu(__blkg_release) ... blkg_free_workfn ->

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  15. CVE-2026-90324

    Hoch · CVSS 7.8EPSS 0,18%Keine Korrektur veröffentlicht

    ublk: check import_ubuf() return value

    In the Linux kernel, the following vulnerability has been resolved: ublk: check import_ubuf() return value import_ubuf() can fail if the address range (provided by the userspace ublk server) is outside the allowed user address space. Return that 0 bytes were copied if import_ubuf() fails rather than passing an uninitialized struct iov_iter to ublk_copy_user_pages().

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  16. CVE-2026-90323

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    ublk: validate auto buf reg before taking uring_cmd

    In the Linux kernel, the following vulnerability has been resolved: ublk: validate auto buf reg before taking uring_cmd With UBLK_F_AUTO_BUF_REG, invalid sqe->addr can fail after ublk_fill_io_cmd() has set UBLK_IO_FLAG_ACTIVE. The uring_cmd is completed while the tag stays active, which can hang teardown. Split validation from buffer apply so the check has no side effects, then take the uring_cmd and store the already-validated buffer. Apply the same order in FETCH so io->buf is not written before __ublk_fetch() state checks.

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  17. CVE-2026-90322

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    ocfs2/cluster: keep heartbeat local node stable

    In the Linux kernel, the following vulnerability has been resolved: ocfs2/cluster: keep heartbeat local node stable o2nm_node_local_store() handles local=0 by stopping o2net and setting cl_local_node to O2NM_INVALID_NODE_NUM, but it leaves cl_has_local set. That stale state makes o2nm_this_node() return 255, blocks a later local=1 attempt with -EBUSY, and can feed 255 to heartbeat users that call o2nm_this_node() dynamically. Clearing cl_has_local is required when the local node is reset. But heartbeat threads can still be running at that point. They pin the local node config item at startup, yet o2hb_do_disk_heartbeat() and thread tear

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  18. CVE-2026-90321

    Hoch · CVSS 7.8EPSS 0,18%Keine Korrektur veröffentlicht

    ocfs2: validate inline xattrs during inode block validation

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate inline xattrs during inode block validation Patch series "ocfs2: validate xattr entry bounds", v7. This series validates OCFS2 xattr entry name/value bounds when xattr metadata is read and validated, before getxattr() or listxattr() can walk out-of-range entry arrays or offsets from corrupted metadata. This patch (of 2): ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk metadata from it, but inline xattr metadata is still checked only in operation-specific consumers. The existing ibody lookup helper validates inline header placement

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  19. CVE-2026-90320

    Hoch · CVSS 7.8EPSS 0,18%Keine Korrektur veröffentlicht

    ocfs2: validate external xattr entries when reading metadata

    In the Linux kernel, the following vulnerability has been resolved: ocfs2: validate external xattr entries when reading metadata ocfs2_validate_xattr_block() checks the xattr block header before the block reaches higher-level xattr users, but it does not verify that a non-indexed block's xh_count and entry offsets fit inside the block. Indexed buckets likewise reach list/get consumers after ECC without an entry-bounds check. Use the flat xattr entry validator for non-indexed external xattr blocks, and use a bucket-specific validator for indexed buckets at metadata read time. The bucket validator keeps the entry array bounded by the first

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

  20. CVE-2026-90319

    Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht

    rapidio: clear mport->net when rio_add_net() fails

    In the Linux kernel, the following vulnerability has been resolved: rapidio: clear mport->net when rio_add_net() fails rio_alloc_net() stores the newly allocated rio_net in mport->net before rio_scan_alloc_net() registers the device. If rio_add_net() fails, rio_scan_alloc_net() drops the device reference with put_device(), which releases the rio_net through the device release callback. However, mport->net is left pointing at the freed object. A later mport unregister path can then dereference the dangling mport->net pointer and may try to free the same rio_net again. Clear mport->net in the rio_add_net() failure path, matching the clean

    linux-lowlatency-hwe-5.19Betriebssysteme
    Veröffentlicht Aktualisiert
    Originalmeldung 1 ↗Originalmeldung 2 ↗Originalmeldung 3 ↗

Prüfen Sie Ihren Server

Gleichen Sie Ihren installierten Stack und seine Versionen mit den aktuellen Sicherheitsmeldungen ab.

Prüfen Sie Ihren Server →