Sicherheitslücken in linux-nvidia-tegra-igx · Seite 184

netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table()

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_cthelper: fix OOB read in nfnl_cthelper_dump_table() nfnl_cthelper_dump_table() has a 'goto restart' that jumps to a label inside the for loop body. When the "last" helper saved in cb->args[1] is deleted between dump rounds, every entry fails the (cur != last) check, so cb->args[1] is never cleared. The for loop finishes with cb->args[0] == nf_ct_helper_hsize, and the 'goto restart' jumps back into the loop body bypassing the bounds check, causing an 8-byte out-of-bounds read on nf_ct_helper_hash[nf_ct_helper_hsize]. The 'goto restart' block was mean

• Auf 5.15.0-1053.53 aktualisieren

nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set dev->online_queues is a count incremented in nvme_init_queue. Thus, valid indices are 0 through dev->online_queues − 1. This patch fixes the loop condition to ensure the index stays within the valid range. Index 0 is excluded because it is the admin queue. KASAN splat: ================================================================== BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_free drivers/nvme/host/pci.c:377 [inline] BUG: KASAN: slab-out-of-bounds in nvme_dbbuf_set+0x39c/0x400 drivers/nvme/host/pci.c:404 Read of size

• Auf 5.15.0-1053.53 aktualisieren

nvme-pci: Fix race bug in nvme_poll_irqdisable()

In the Linux kernel, the following vulnerability has been resolved: nvme-pci: Fix race bug in nvme_poll_irqdisable() In the following scenario, pdev can be disabled between (1) and (3) by (2). This sets pdev->msix_enabled = 0. Then, pci_irq_vector() will return MSI-X IRQ(>15) for (1) whereas return INTx IRQ(<=15) for (2). This causes IRQ warning because it tries to enable INTx IRQ that has never been disabled before. To fix this, save IRQ number into a local variable and ensure disable_irq() and enable_irq() operate on the same IRQ number. Even if pci_free_irq_vectors() frees the IRQ concurrently, disable_irq() and enable_irq() on a stale

e1000/e1000e: Fix leak in DMA error cleanup

In the Linux kernel, the following vulnerability has been resolved: e1000/e1000e: Fix leak in DMA error cleanup If an error is encountered while mapping TX buffers, the driver should unmap any buffers already mapped for that skb. Because count is incremented after a successful mapping, it will always match the correct number of unmappings needed when dma_error is reached. Decrementing count before the while loop in dma_error causes an off-by-one error. If any mapping was successful before an unsuccessful mapping, exactly one DMA mapping would leak. In these commits, a faulty while condition caused an infinite loop in dma_error: Commit 03b

• Auf 5.15.0-1053.53 aktualisieren

cgroup: fix race between task migration and iteration

In the Linux kernel, the following vulnerability has been resolved: cgroup: fix race between task migration and iteration When a task is migrated out of a css_set, cgroup_migrate_add_task() first moves it from cset->tasks to cset->mg_tasks via: list_move_tail(&task->cg_list, &cset->mg_tasks); If a css_task_iter currently has it->task_pos pointing to this task, css_set_move_task() calls css_task_iter_skip() to keep the iterator valid. However, since the task has already been moved to ->mg_tasks, the iterator is advanced relative to the mg_tasks list instead of the original tasks list. As a result, remaining tasks on cset->tasks, as wel

• Auf 5.15.0-1053.53 aktualisieren

ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain()

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: fix use-after-free on linked stream runtime in snd_pcm_drain() In the drain loop, the local variable 'runtime' is reassigned to a linked stream's runtime (runtime = s->runtime at line 2157). After releasing the stream lock at line 2169, the code accesses runtime->no_period_wakeup, runtime->rate, and runtime->buffer_size (lines 2170-2178) — all referencing the linked stream's runtime without any lock or refcount protecting its lifetime. A concurrent close() on the linked stream's fd triggers snd_pcm_release_substream() → snd_pcm_drop() → pcm_release_private() →

• Auf 5.15.0-1059.59 aktualisieren

ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Check endpoint numbers at parsing Scarlett2 mixer interfaces The Scarlett2 mixer quirk in USB-audio driver may hit a NULL dereference when a malformed USB descriptor is passed, since it assumes the presence of an endpoint in the parsed interface in scarlett2_find_fc_interface(), as reported by fuzzer. For avoiding the NULL dereference, just add the sanity check of bNumEndpoints and skip the invalid interface.

usb: xhci: Fix memory leak in xhci_disable_slot()

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not

• Auf 5.15.0-1053.53 aktualisieren

usb: yurex: fix race in probe

In the Linux kernel, the following vulnerability has been resolved: usb: yurex: fix race in probe The bbu member of the descriptor must be set to the value standing for uninitialized values before the URB whose completion handler sets bbu is submitted. Otherwise there is a window during which probing can overwrite already retrieved data.

• Auf 5.15.0-1053.53 aktualisieren

USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts

In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely.

• Auf 5.15.0-1053.53 aktualisieren

USB: core: Limit the length of unkillable synchronous timeouts

In the Linux kernel, the following vulnerability has been resolved: USB: core: Limit the length of unkillable synchronous timeouts The usb_control_msg(), usb_bulk_msg(), and usb_interrupt_msg() APIs in usbcore allow unlimited timeout durations. And since they use uninterruptible waits, this leaves open the possibility of hanging a task for an indefinitely long time, with no way to kill it short of unplugging the target device. To prevent this sort of problem, enforce a maximum limit on the length of these unkillable timeouts. The limit chosen here, somewhat arbitrarily, is 60 seconds. On many systems (although not all) this is short eno

• Auf 5.15.0-1053.53 aktualisieren

usb: class: cdc-wdm: fix reordering issue in read code path

In the Linux kernel, the following vulnerability has been resolved: usb: class: cdc-wdm: fix reordering issue in read code path Quoting the bug report: Due to compiler optimization or CPU out-of-order execution, the desc->length update can be reordered before the memmove. If this happens, wdm_read() can see the new length and call copy_to_user() on uninitialized memory. This also violates LKMM data race rules [1]. Fix it by using WRITE_ONCE and memory barriers.

• Auf 5.15.0-1053.53 aktualisieren

usb: renesas_usbhs: fix use-after-free in ISR during device removal

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called.

• Auf 5.15.0-1053.53 aktualisieren

usb: image: mdc800: kill download URB on timeout

In the Linux kernel, the following vulnerability has been resolved: usb: image: mdc800: kill download URB on timeout mdc800_device_read() submits download_urb and waits for completion. If the timeout fires and the device has not responded, the function returns without killing the URB, leaving it active. A subsequent read() resubmits the same URB while it is still in-flight, triggering the WARN in usb_submit_urb(): "URB submitted while active" Check the return value of wait_event_timeout() and kill the URB if it indicates timeout, ensuring the URB is complete before its status is inspected or the URB is resubmitted. Similar to - commit

• Auf 5.15.0-1053.53 aktualisieren

usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: Fix NULL pointer dereferences in nexus handling The `tpg->tpg_nexus` pointer in the USB Target driver is dynamically managed and tied to userspace configuration via ConfigFS. It can be NULL if the USB host sends requests before the nexus is fully established or immediately after it is dropped. Currently, functions like `bot_submit_command()` and the data transfer paths retrieve `tv_nexus = tpg->tpg_nexus` and immediately dereference `tv_nexus->tvn_se_sess` without any validation. If a malicious or misconfigured USB host sends a BOT (Bulk-Only Transport)

usb: gadget: f_ncm: Fix net_device lifecycle with device_move

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix net_device lifecycle with device_move The network device outlived its parent gadget device during disconnection, resulting in dangling sysfs links and null pointer dereference problems. A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1] was reverted due to power management ordering concerns and a NO-CARRIER regression. A subsequent attempt to defer net_device allocation to bind [2] broke 1:1 mapping between function instance and network device, making it impossible for configfs to report the resolved interface name. This results

ceph: fix i_nlink underrun during async unlink

In the Linux kernel, the following vulnerability has been resolved: ceph: fix i_nlink underrun during async unlink During async unlink, we drop the `i_nlink` counter before we receive the completion (that will eventually update the `i_nlink`) because "we assume that the unlink will succeed". That is not a bad idea, but it races against deletions by other clients (or against the completion of our own unlink) and can lead to an underrun which emits a WARNING like this one: WARNING: CPU: 85 PID: 25093 at fs/inode.c:407 drop_nlink+0x50/0x68 Modules linked in: CPU: 85 UID: 3221252029 PID: 25093 Comm: php-cgi8.1 Not tainted 6.14.11-cm4all1-a

• Auf 5.15.0-1053.53 aktualisieren

ceph: fix memory leaks in ceph_mdsc_build_path()

In the Linux kernel, the following vulnerability has been resolved: ceph: fix memory leaks in ceph_mdsc_build_path() Add __putname() calls to error code paths that did not free the "path" pointer obtained by __getname(). If ownership of this pointer is not passed to the caller via path_info.path, the function must free it before returning.

powerpc, perf: Check that current->mm is alive before getting user callchain

In the Linux kernel, the following vulnerability has been resolved: powerpc, perf: Check that current->mm is alive before getting user callchain It may happen that mm is already released, which leads to kernel panic. This adds the NULL check for current->mm, similarly to commit 20afc60f892d ("x86, perf: Check that current->mm is alive before getting user callchain"). I was getting this panic when running a profiling BPF program (profile.py from bcc-tools): [26215.051935] Kernel attempted to read user page (588) - exploit attempt? (uid: 0) [26215.051950] BUG: Kernel NULL pointer dereference on read at 0x00000588 [26215.051952]

scsi: qla2xxx: Completely fix fcport double free

In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Completely fix fcport double free In qla24xx_els_dcmd_iocb() sp->free is set to qla2x00_els_dcmd_sp_free(). When an error happens, this function is called by qla2x00_sp_release(), when kref_put() releases the first and the last reference. qla2x00_els_dcmd_sp_free() frees fcport by calling qla2x00_free_fcport(). Doing it one more time after kref_put() is a bad idea.

• Auf 5.15.0-1052.52 aktualisieren