Sicherheitslücken in linux-nvidia-tegra · Seite 144

hfs/hfsplus: zero-initialize buffer in hfs_bnode_read

In the Linux kernel, the following vulnerability has been resolved: hfs/hfsplus: zero-initialize buffer in hfs_bnode_read hfs_bnode_read() can return early without writing to the output buffer when is_bnode_offset_valid() fails or when check_and_correct_requested_ length() corrects the length to zero. Callers such as hfs_bnode_read_ u16() and hfs_bnode_read_u8() pass stack-allocated buffers and use the result unconditionally, leading to KMSAN uninit-value reports. Rather than initializing at each individual call site, zero the buffer at the start of hfs_bnode_read() before any validation checks. This ensures all callers in both hfs and h

• Auf 5.15.0-1070.72 aktualisieren

nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers

In the Linux kernel, the following vulnerability has been resolved: nilfs2: reject CLEAN_SEGMENTS ioctl with out-of-range segment numbers Syzbot reported a hung task in nilfs_transaction_begin() where multiple tasks performing chmod() on a nilfs2 mount blocked for over 143 seconds waiting to acquire ns_segctor_sem for read: INFO: task syz.0.17:5918 blocked for more than 143 seconds. Call Trace: schedule+0x164/0x360 rwsem_down_read_slowpath+0x6d9/0x940 down_read+0x99/0x2e0 nilfs_transaction_begin+0x364/0x710 fs/nilfs2/segment.c:221 nilfs_setattr+0x124/0x2c0 fs/nilfs2/inode.c:921 notify_change+0xc1a/0xf40 chmod_commo

• Auf 5.15.0-1070.72 aktualisieren

bpf: Reject fragmented frames in devmap

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject fragmented frames in devmap Devmap broadcast redirects clone the packet for all but the last destination. For native XDP, that clone path copies only the linear xdp_frame data, while fragmented frames keep skb_shared_info in tailroom outside the linear area. Cloning such a frame leaves XDP_FLAGS_HAS_FRAGS set but without valid frag metadata, and the later free path can interpret uninitialized tail data as skb_shared_info, leading to an out-of-bounds access during frame return. Reject fragmented native XDP frames in dev_map_enqueue_clone(). Add the same restri

• Auf 5.15.0-1070.72 aktualisieren

bpf: Allow LPM map access from sleepable BPF programs

In the Linux kernel, the following vulnerability has been resolved: bpf: Allow LPM map access from sleepable BPF programs trie_lookup_elem() annotates its rcu_dereference_check() walks with only rcu_read_lock_bh_held(). Because rcu_dereference_check(p, c) resolves to "c || rcu_read_lock_held()", this passes for XDP/NAPI and classic RCU readers but fails for sleepable BPF programs, which enter via __bpf_prog_enter_sleepable() and hold only rcu_read_lock_trace(). trie_update_elem() and trie_delete_elem() have the same problem in a different form: they walk the trie with plain rcu_dereference(), which asserts rcu_read_lock_held() uncondition

• Auf 5.15.0-1070.72 aktualisieren

net: usb: kalmia: bound RX frame length in kalmia_rx_fixup()

In the Linux kernel, the following vulnerability has been resolved: net: usb: kalmia: bound RX frame length in kalmia_rx_fixup() kalmia_rx_fixup() computes usb_packet_length = skb->len - (2 * KALMIA_HEADER_LENGTH) as a u16, guarded only by a pre-loop check that skb->len is at least KALMIA_HEADER_LENGTH, which is 6. A device can deliver a short bulk-IN frame with skb->len in the 6 to 11 range, or leave a short trailing remainder on a later loop iteration. Either case underflows usb_packet_length to about 65530. That bypasses the usb_packet_length < ether_packet_length truncation path. The device-supplied ether_packet_length, a le16 up to 65

• Auf 5.15.0-1070.72 aktualisieren

usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info()

In the Linux kernel, the following vulnerability has been resolved: usb: cdnsp: fix stream context array leak in cdnsp_alloc_stream_info() cdnsp_alloc_stream_info() allocates stream_info->stream_ctx_array with cdnsp_alloc_stream_ctx(). If a later stream ring allocation or stream mapping update fails, the error path frees the allocated stream rings and stream_rings array, but leaves stream_ctx_array allocated. Free the stream context array before falling through to the stream_rings cleanup path.

• Auf 5.15.0-1070.72 aktualisieren

usb: free iso schedules on failed submit

In the Linux kernel, the following vulnerability has been resolved: usb: free iso schedules on failed submit EHCI and FOTG210 isochronous submits build an ehci_iso_sched before linking the URB to the endpoint queue, and keep the staged schedule in urb->hcpriv until iso_stream_schedule() and the link helpers consume it. If the controller is no longer accessible, or usb_hcd_link_urb_to_ep() fails, submit jumps to done_not_linked before that handoff happens and leaks the staged schedule still attached to urb->hcpriv. Free the staged schedule from done_not_linked when submit fails before the URB is linked and clear urb->hcpriv after the free.

usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: composite: fix dead empty check in the USB_DT_OTG handler The OTG branch of composite_setup() falls back to the first configuration when none is selected: if (cdev->config) config = cdev->config; else config = list_first_entry(&cdev->configs, struct usb_configuration, list); if (!config) goto done; ... memcpy(req->buf, config->descriptors[0], value); list_first_entry() never returns NULL. On an empty list it returns container_of() of the list head. So the "if (!config)" check is dead. When cdev->configs is empty, config points at the head i

• Auf 5.15.0-1070.72 aktualisieren

usb: gadget: udc: Fix use-after-free in gadget_match_driver

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: Fix use-after-free in gadget_match_driver The udc structure acts as the management structure for the gadget, but their lifecycles are decoupled. A race condition exists where usb_del_gadget() frees the udc memory (e.g., via mode-switch work) while gadget_match_driver() concurrently accesses the freed udc memory (e.g., via configfs), causing a Use-After-Free (UAF) that triggers a NULL pointer dereference when the freed memory is zeroed: [39430.908615][ T1171] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [39430.911397

• Auf 5.15.0-1070.72 aktualisieren

usb: gadget: f_printer: take kref only for successful open

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_printer: take kref only for successful open printer_open() returns -EBUSY when the character device is already open, but it increments dev->kref regardless of the return value. VFS does not call ->release() for a failed open, so every rejected second open permanently leaks one reference. Move kref_get() into the successful-open branch.

USB: idmouse: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: idmouse: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use t

• Auf 5.15.0-1070.72 aktualisieren

USB: ldusb: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: ldusb: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the

• Auf 5.15.0-1070.72 aktualisieren

USB: iowarrior: fix use-after-free on disconnect

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect Submitted write URBs are not stopped on close() and therefore need to be stopped unconditionally on disconnect() to avoid use-after-free in the completion handler.

• Auf 5.15.0-1070.72 aktualisieren

USB: iowarrior: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: iowarrior: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still use the lock object

USB: legousbtower: fix use-after-free on disconnect race

In the Linux kernel, the following vulnerability has been resolved: USB: legousbtower: fix use-after-free on disconnect race mutex_unlock() may access the mutex structure after releasing the lock and therefore cannot be used to manage lifetime of objects directly (unlike spinlocks and refcounts). [1][2] Use a kref to release the driver data to avoid use-after-free in mutex_unlock() when release() races with disconnect(). [1] a51749ab34d9 ("locking/mutex: Document that mutex_unlock() is non-atomic") [2] 2b9d9e0a9ba0 ("locking/mutex: Clarify that mutex_unlock(), and most other sleeping locks, can still

• Auf 5.15.0-1070.72 aktualisieren

USB: misc: uss720: unregister parport on probe failure

In the Linux kernel, the following vulnerability has been resolved: USB: misc: uss720: unregister parport on probe failure uss720_probe() registers a parport before reading the 1284 register used to detect unsupported Belkin F5U002 adapters. If get_1284_register() fails, the error path drops the driver private data and the USB device reference, but leaves the parport device registered. Leaving the port registered is more than a private allocation leak: parport_register_port() has already reserved a parport number and registered the parport bus device, while pp->private_data still points at the private data that the common error path is abo

• Auf 5.15.0-1070.72 aktualisieren

usb: mtu3: unmap request DMA on queue failure

In the Linux kernel, the following vulnerability has been resolved: usb: mtu3: unmap request DMA on queue failure mtu3_gadget_queue() maps the request before checking whether the QMU GPD ring can accept another transfer. the request is returned with -EAGAIN before it is linked on the endpoint request list if mtu3_prepare_transfer() fails. Normal completion and dequeue paths unmap requests from mtu3_req_complete(), but this error path never reaches that helper, so the DMA mapping is left active. Unmap the request before returning from the failed queue path.

• Auf 5.15.0-1070.72 aktualisieren

USB: serial: keyspan_pda: fix information leak

In the Linux kernel, the following vulnerability has been resolved: USB: serial: keyspan_pda: fix information leak The write() callback is supposed to return the number of characters accepted or a negative errno. Since the addition of write fifo support the keyspan_pda implementation will however return the number characters submitted to the device if the write urb is not already in use. If this number is larger than the number of characters passed to write(), the line discipline continues writing data from beyond the tty write buffer. Fix the information leak by making sure that keyspan_pda_write_start() returns zero on success as intende

• Auf 5.15.0-1070.72 aktualisieren

USB: serial: digi_acceleport: fix broken rx after throttle

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix broken rx after throttle If the port is closed while throttled, the read urb is never resubmitted and the port will not receive any further data until the device is reconnected (or the driver is rebound). Clear the throttle flags and submit the urb if needed when opening the port.

• Auf 5.15.0-1070.72 aktualisieren

USB: serial: digi_acceleport: fix hard lockup on disconnect

In the Linux kernel, the following vulnerability has been resolved: USB: serial: digi_acceleport: fix hard lockup on disconnect If submitting the OOB write urb fails persistently (e.g if the device is being disconnected) the driver would loop indefinitely with interrupts disabled. Check for urb submission errors when sending OOB commands to avoid hanging if, for example, open(), set_termios() or close() races with a physical disconnect. This is issue was flagged by Sashiko when reviewing an unrelated change to the driver.

• Auf 5.15.0-1070.72 aktualisieren