Sicherheitslücken in linux-nvidia · Seite 132

drm/i915/mst: limit DP MST ESI service loop

In the Linux kernel, the following vulnerability has been resolved: drm/i915/mst: limit DP MST ESI service loop The loop in intel_dp_check_mst_status() keeps servicing interrupts originating from the sink without bound. Add an upper bound to the new interrupts occurring during interrupt processing to not get stuck on potentially stuck sink devices. Use arbitrary 32 tries to clear incoming interrupts in one go. Discovered using AI-assisted static analysis confirmed by Intel Product Security. Note: The condition likely pre-dates the commit in the Fixes: tag, but this is about as far back as a backport has any chance of succeeding. Before th

drm/amdgpu: Release VFCT ACPI table reference

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Release VFCT ACPI table reference amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table() but never releases it. acpi_get_table() takes a reference on the table (incrementing its validation_count and mapping it on the 0->1 transition); without a paired acpi_put_table() the mapping is leaked on every call, whether or not a matching VBIOS image is found. Route all exit paths after the table is acquired through a common acpi_put_table(). The VBIOS image is copied out with kmemdup() before the table is released, so it remains valid for the caller. (ch

drm/amd/display: set new_stream to NULL after release

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: set new_stream to NULL after release In dm_update_crtc_state(), the skip_modeset path releases new_stream via dc_stream_release() but does not set the pointer to NULL. If a later error (e.g., color management failure) triggers the fail label, the error path calls dc_stream_release() again on the same dangling pointer, causing a double release and potential use-after-free. Fix this by setting new_stream to NULL after the initial release. (cherry picked from commit 99f3af19073b3ddbfd96e789124cce12c4277b28)

• Auf 5.15.0-1114.115 aktualisieren

drm/amd/display: dce100: skip non-DP stream encoders for DP MST

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: dce100: skip non-DP stream encoders for DP MST On DCE8-class ASICs (e.g. Bonaire), the resource pool contains digital DIG stream encoders plus one analog DAC encoder. When assigning a stream encoder for a second DisplayPort MST stream, if the preferred digital encoder is already acquired, dce100_find_first_free_match_stream_enc_for_link() falls back to the first free pool entry. That entry may be the analog encoder, whose funcs table lacks DP hooks such as dp_set_stream_attribute. The subsequent atomic commit then dereferences NULL function pointers in link

drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved amdgpu_bo_create_reserved() only allocates a new BO when *bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is NULL, it simply skips creation when *bo_ptr is non-NULL. But it unconditionally reserves, pins, gart allocates and maps the BO afterwards. When the same non-NULL BO pointer is passed in again, for example firmware buffers that live in adev and are re-loaded on every resume / cp_resume / start under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases pin_count unconditionally, however the matching t

• Auf 5.15.0-1112.113 aktualisieren

drm/vc4: Shut down BO cache timer before teardown

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Shut down BO cache timer before teardown The BO cache timer callback schedules time_work, and time_work can rearm the timer through vc4_bo_cache_free_old(). vc4_bo_cache_destroy() deletes the timer and then cancels the work, which does not break that cycle: the work being cancelled can rearm the timer, and the timer then queues work again after teardown. Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the cycle ends with cancel_work_sync().

media: airspy: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: airspy: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. airspy_start_streaming() returned -ENODEV early when the USB device had been disconnected (s->udev == NULL) without returning any buffers that buf_queue() had already accepted. Take v4l2_lock first and jump to the existing err_clea

• Auf 5.15.0-1112.113 aktualisieren

media: cedrus: skip invalid H.264 reference list entries

In the Linux kernel, the following vulnerability has been resolved: media: cedrus: skip invalid H.264 reference list entries Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the stateless slice control and later uses their indices to look up decode->dpb[] in _cedrus_write_ref_list(). Rejecting such controls in cedrus_try_ctrl() would break existing userspace, since stateless H.264 reference lists may legitimately carry out-of-range indices for missing references. Instead, guard the actual DPB lookup in Cedrus and skip entries whose indices do not fit the fixed V4L2_H264_NUM_DPB_ENTRIES array. This keeps the fix local to the

• Auf 5.15.0-1112.113 aktualisieren

media: cx231xx: fix devres lifetime

In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the driver state lifetime so that it is released on driver unbind.

• Auf 5.15.0-1112.113 aktualisieren

media: cx23885: add ioremap return check and cleanup

In the Linux kernel, the following vulnerability has been resolved: media: cx23885: add ioremap return check and cleanup Add a check for the return value of pci_ioremap_bar() in cx23885_dev_setup(). If ioremap for BAR0 fails, release the already allocated PCI memory region, decrement the device count, and return -ENODEV. This prevents a potential null pointer dereference and ensures proper cleanup on memory mapping failure.

• Auf 5.15.0-1112.113 aktualisieren

media: meson: vdec: Fix memory leak in error path of vdec_open

In the Linux kernel, the following vulnerability has been resolved: media: meson: vdec: Fix memory leak in error path of vdec_open The vdec_open() function previously jumped directly to err_m2m_release when vdec_init_ctrls() failed, skipping release of the m2m context. This caused a resource leak. Fix it by introducing a proper err_m2m_ctx_release label that calls v4l2_m2m_ctx_release(sess->m2m_ctx) before releasing the m2m device. This was identified via kmemleak: unreferenced object 0xffff0000205d6878 (size 8): comm "v4l_id", pid 5289, jiffies 4294938580 hex dump (first 8 bytes): 40 d2 49 18 00 00 ff ff

• Auf 5.15.0-1112.113 aktualisieren

media: msi2500: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptib

• Auf 5.15.0-1112.113 aktualisieren

media: pci: dm1105: Free allocated workqueue

In the Linux kernel, the following vulnerability has been resolved: media: pci: dm1105: Free allocated workqueue Destroy allocated workqueue in remove() callback to free its resources, thus fixing memory leak.

• Auf 5.15.0-1112.113 aktualisieren

media: pwc: Drain fill_buf on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails

• Auf 5.15.0-1112.113 aktualisieren

media: pwc: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. pwc's start_streaming() had two early returns that hit this trap: -ENODEV when the USB device was already disconnected, and -ERESTARTSYS when mutex_lock_interruptible() was interrupted by a signal. Call the existing pwc_cleanup_queued

• Auf 5.15.0-1112.113 aktualisieren

media: radio-si476x: Unregister v4l2_device on probe failure

In the Linux kernel, the following vulnerability has been resolved: media: radio-si476x: Unregister v4l2_device on probe failure si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2 controls and before registering the video device. If any of those later steps fails, probe returns through the exit label after freeing only the control handler. A failed probe does not call si476x_radio_remove(), so the v4l2_device_unregister() there is not reached. This leaves the parent device reference taken by v4l2_device_register() behind on the error path. Unregister the V4L2 device in the probe error path after freeing the controls.

• Auf 5.15.0-1112.113 aktualisieren

media: rtl2832: fix use-after-free in rtl2832_remove()

In the Linux kernel, the following vulnerability has been resolved: media: rtl2832: fix use-after-free in rtl2832_remove() cancel_delayed_work_sync() is called before i2c_mux_del_adapters() in rtl2832_remove(). While the cancel waits for any running instance of i2c_gate_work to finish, it does not prevent the timer from being rescheduled by a concurrent thread. During probe, the r820t_attach() call attempts I2C transfers through the mux adapter. These transfers go through i2c_mux_master_xfer(), which calls rtl2832_deselect() after the transfer completes, rescheduling i2c_gate_work via schedule_delayed_work(). If this transfer is still in f

• Auf 5.15.0-1112.113 aktualisieren

media: rtl2832_sdr: Return queued buffers on start_streaming() failure

In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. rtl2832_sdr_start_streaming() had multiple error paths that hit this trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six `goto err` paths covering subdev s_power, tuner setup, ADC setup, stream-buffer allocation, u

• Auf 5.15.0-1112.113 aktualisieren

media: saa7134: Fix a possible memory leak in saa7134_video_init1

In the Linux kernel, the following vulnerability has been resolved: media: saa7134: Fix a possible memory leak in saa7134_video_init1 In saa7134_video_init1(), the return value of the first saa7134_pgtable_alloc() is not checked. If it fails, the function continues as if successful, leaving the driver with an invalid page table. Additionally, if vb2_queue_init() for the VBI queue fails after the video queue page table has been allocated, the allocated memory is not freed before returning. The second saa7134_pgtable_alloc() also lacks a return value check. Errors occur during device probing before the device is fully registered, the normal c

• Auf 5.15.0-1112.113 aktualisieren

media: stm32: dcmi: unregister notifier on probe failure

In the Linux kernel, the following vulnerability has been resolved: media: stm32: dcmi: unregister notifier on probe failure dcmi_graph_init() registers the async notifier before dcmi_probe() toggles the reset line. If reset_control_assert() or reset_control_deassert() fails afterwards, probe returns through err_cleanup and the driver core will not call dcmi_remove(). Unregister the notifier before cleaning it up on that error path, matching the successful remove path and the V4L2 async notifier lifetime rules. [hverkuil: added Fixes tag]