Nicht bewertetEPSS 0,15%Keine Korrektur veröffentlicht
sched_ext: Close the pre-enable ops error claim window
In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Close the pre-enable ops error claim window
scx_alloc_and_add_sched() publishes ops->priv before
scx_root_enable_workfn() switches the state to SCX_ENABLING. An error
claimed via scx_bpf_error_bstr() from an associated BPF program in that
window is consumed by scx_disable_workfn(), which takes the pre-enable
shortcut in scx_root_disable(). The shortcut returns without any teardown
and restores SCX_DISABLED with an unconditional scx_set_enable_state() xchg
racing the enable workfn's own transition. The enable then completes with
the claim consumed: the scheduler s
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
i2c: atr: fix dangling adapter pointer on add failure
In the Linux kernel, the following vulnerability has been resolved:
i2c: atr: fix dangling adapter pointer on add failure
i2c_atr_add_adapter() stores atr->adapter[chan_id] before
i2c_add_adapter() so that the I2C bus notifier can match child clients
during registration. On failure the channel is freed but the slot was
left pointing at freed memory, which can lead to use-after-free in
i2c_atr_del_adapter() / cleanup and also block reuse with -EEXIST.
Clear the slot on the i2c_add_adapter() error path before freeing chan.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
In the Linux kernel, the following vulnerability has been resolved:
IB/mlx4: Fix use-after-free on pkey sysfs registration failure
register_pkey_tree() ignores errors from register_one_pkey_tree() and
continues registering the remaining slaves. The per-slave error path has
already released the pkey parent kobjects, but their pointers remain
stored in the device. A later device cleanup therefore passes the stale
pointers to kobject_put(), causing a use-after-free.
Clear the parent pointers after releasing a failed slave tree and skip
unregistered trees during device cleanup. This preserves the existing
best-effort registration behavior whil
In the Linux kernel, the following vulnerability has been resolved:
IB/hfi1: Fix the PIO_CRED credit-return mmap
hfi1_file_mmap()'s PIO_CRED case must hand user space the single
credit-return page that holds this context's entry. That page is the
second or third page of the per-node credit-return allocation once the
hardware send context index reaches 64 or 128, so the failure below is
intermittent: when the entry lands on the first page the offset is zero
and everything works.
Two things are wrong.
First, cr_page_offset is a byte offset but .va is a struct
credit_return *, so adding it is pointer arithmetic and scales the offset
by size
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
selinux: preserve user SID across nested backing files
In the Linux kernel, the following vulnerability has been resolved:
selinux: preserve user SID across nested backing files
SELinux saves the user file SID in a backing-file security blob so it
remains available after mmap() replaces vma->vm_file with a backing file.
For nested backing files (overlayfs over overlayfs, or FUSE passthrough
backed by overlayfs), user_file may itself be a backing file. Its
fsec->sid is the SID of the mounter that opened it, rather than the user
that opened the top-level file. mprotect() then checks fd { use } against
the mounter SID. This can incorrectly deny access without a domain
transition, or check the
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
selinux: recheck intermediate backing files on mprotect()
In the Linux kernel, the following vulnerability has been resolved:
selinux: recheck intermediate backing files on mprotect()
mprotect() can be used to bypass the SELinux checks that mmap() performs
against the intermediate layers of a stacked filesystem.
mmap() checks every backing layer as the request descends through the
stack. mprotect() only has the lowest backing file in vma->vm_file, so it
rechecks the top-level user and the lowest mounter, but skips the mounters
of every layer in between. With two nested overlayfs mounts and a policy
denying mounter_t -> middle_file_t:file { execute }, a direct
mmap(PROT_EXEC) is denied:
avc:
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
mmc: core: Cancel SDIO IRQ work before freeing host
In the Linux kernel, the following vulnerability has been resolved:
mmc: core: Cancel SDIO IRQ work before freeing host
A host controller that uses sdio_signal_irq() schedules host->sdio_irq_work
from its interrupt handler. That work is only cancelled on the suspend
path (mmc_sdio_suspend()), not on the remove/free path, so a worker armed
just before the controller freed its IRQ can run after
mmc_host_classdev_release() has freed the host and dereference it through
container_of().
Cancel host->sdio_irq_work in mmc_free_host(), like the existing
host->detect drain added by commit 1036f69e2513 ("mmc: core: Cancel
delayed work before releasi
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
mmc: hsq: Fix use-after-free in retry work
In the Linux kernel, the following vulnerability has been resolved:
mmc: hsq: Fix use-after-free in retry work
mmc_hsq_pump_requests() queues retry_work when request_atomic() returns
-EBUSY; today sdhci-sprd is the only consumer that implements
request_atomic(). The work is embedded in a devm-allocated mmc_hsq, but
is never cancelled during driver removal. Work still pending at unbind
can therefore run after the devm allocation has been released and
dereference hsq->mmc and hsq->mrq.
Use devm_work_autocancel() to cancel and drain retry_work before the devm
allocation is released. By the time devres cleanup begins,
mmc_remove_host() has alr
Nicht bewertetEPSS 0,21%Keine Korrektur veröffentlicht
mmc: mmci: Fix use-after-free in busy-timeout work
In the Linux kernel, the following vulnerability has been resolved:
mmc: mmci: Fix use-after-free in busy-timeout work
ux500_busy_complete() can queue ux500_busy_timeout_work for an R1b
command, but mmci_remove() never cancels it. The work can subsequently
dereference the devm-allocated mmci_host after it has been released.
Mask the controller interrupts and disable the delayed work during
removal. This drains any queued instance and stops an IRQ handler that
is still in progress from queueing the work again once it has been
disabled.
This issue was found by an in-house static analysis tool.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
mmc: mxcmmc: cancel data work and watchdog on remove
In the Linux kernel, the following vulnerability has been resolved:
mmc: mxcmmc: cancel data work and watchdog on remove
mxcmci_remove() frees the host through the devm tail, but neither it nor
mmc_remove_host() drains the driver's own asynchronous state.
host->watchdog, a 10 s timer armed on the DMA path in mxcmci_setup_data(),
is deleted only by the DMA- and IRQ-complete paths, which the remove path
does not explicitly drain; it can therefore fire after the host is freed
and dereference it in mxcmci_watchdog(). host->datawork, armed from the
IRQ handler on the PIO path, is not cancelled by the remove path either.
Free the devm-registere
Nicht bewertetEPSS 0,22%Keine Korrektur veröffentlicht
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdhci-of-aspeed: Remove children before releasing SDC resources
Probe failure and removal leave SDHCI child devices registered after the
parent clock and managed resources are released.
Unregister the OF children in reverse order before disabling the parent
clock on both paths. Use of_platform_device_destroy() because manual
child creation does not set the flag required by of_platform_depopulate().
This issue was identified during our ongoing static-analysis research
while reviewing kernel code.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
In the Linux kernel, the following vulnerability has been resolved:
mmc: sdio_uart: fix xmit_fifo leak when the port table is full
sdio_uart_add_port() allocates the transmit fifo before claiming a
slot in sdio_uart_table[]. When all UART_NR slots are taken, it
returns -EBUSY with the fifo still allocated, but the probe error
path only kfree()s the port, leaking the transmit fifo.
Free the fifo in the failure path of sdio_uart_add_port() itself so
the function retains nothing on error.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
mmc: spi: reset bytes_xfered before retrying CRC failures
In the Linux kernel, the following vulnerability has been resolved:
mmc: spi: reset bytes_xfered before retrying CRC failures
mmc_spi_data_do() updates data->bytes_xfered after each block has been
transferred successfully. If a later block in the same data request
fails with a CRC error, data->bytes_xfered may therefore contain the
number of bytes completed before the failing block.
mmc_spi_request() has a private recovery path for such CRC failures. It
sends STOP_TRANSMISSION, clears data->error and jumps back to
crc_recover to issue the same command and data request again. However,
it does not clear data->bytes_xfered before the retry
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
Input: cyttsp5 - clamp the HID report size before memcpy
In the Linux kernel, the following vulnerability has been resolved:
Input: cyttsp5 - clamp the HID report size before memcpy
The size field comes from the device and is used as the memcpy()
length into response_buf, which is CY_MAX_INPUT bytes.
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
Input: evdev - zero absinfo before partial copy in EVIOCSABS
In the Linux kernel, the following vulnerability has been resolved:
Input: evdev - zero absinfo before partial copy in EVIOCSABS
The EVIOCSABS handler copies at most the user supplied ioctl size into
an uninitialized on-stack struct input_absinfo:
if (copy_from_user(&abs, p, min_t(size_t,
size, sizeof(struct input_absinfo))))
The size comes from _IOC_SIZE() of the ioctl command and is therefore
fully controlled by userspace. A short size leaves the trailing part of
the structure holding whatever was on the kernel stack, and the whole
structure is then stored into the device:
dev->absinfo[t] = abs;
EVIOCGABS hands that back to users
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block()
In the Linux kernel, the following vulnerability has been resolved:
Input: rmi_smbus - fix out-of-bounds read in rmi_smb_write_block()
When chunking writes into SMBus blocks in rmi_smb_write_block(), the
loop calculates block_len using the original total length (len) instead
of the remaining length (cur_len).
If len is greater than 32 bytes (SMB_MAX_COUNT), block_len remains 32
for every iteration, even on the final partial chunk where fewer than 32
bytes remain. This causes smb_block_write() to read 32 bytes from the
advanced data buffer pointer, reading past the end of the input buffer.
Fix this by calculating block_len using cur_len an
In the Linux kernel, the following vulnerability has been resolved:
Input: soc_button_array - check btns_desc->package.count
Check that btns_desc->package.count is not 0 before accessing
btns_desc->package.elements[0].
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
In the Linux kernel, the following vulnerability has been resolved:
Input: synaptics-rmi4 - fix GPF in suspend and resume when unbound
Transport drivers (such as rmi_i2c and rmi_spi) invoke
rmi_driver_suspend() and rmi_driver_resume() on their child rmi_dev
device during system power management events. However, transport drivers
are fully registered and operational even if the physical RMI driver
failed to bind or probe the rmi_dev device.
When rmi_driver_suspend() or rmi_driver_resume() is called on an unbound
rmi_dev, dev_get_drvdata() returns NULL. Calling rmi_disable_irq() or
rmi_enable_irq() without driver data attached causes a NULL
Nicht bewertetEPSS 0,18%Keine Korrektur veröffentlicht
Input: zero ff_effect before compat copy in input_ff_effect_from_user
In the Linux kernel, the following vulnerability has been resolved:
Input: zero ff_effect before compat copy in input_ff_effect_from_user
In the compat path input_ff_effect_from_user() aliases the caller's
native struct ff_effect with the smaller struct ff_effect_compat and
copies only the compat sized prefix:
compat_effect = (struct ff_effect_compat *)effect;
if (copy_from_user(compat_effect, buffer,
sizeof(struct ff_effect_compat)))
The tail of the native structure is never written. Callers pass an
uninitialized on-stack object, for example evdev_do_ioctl() for
EVIOCSFF, so those bytes keep their previous stack contents.
input_
Nicht bewertetEPSS 0,17%Keine Korrektur veröffentlicht
hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show()
In the Linux kernel, the following vulnerability has been resolved:
hwmon: (hp-wmi-sensors) Fix use-after-free in fungible_show()
nsensor->current_state is dynamically replaced as the sensor's state
changes. update_numeric_sensor_from_wobj() does this by freeing the
old string and installing a new one:
if (strcmp(trimmed, nsensor->current_state)) {
new_string = hp_wmi_strdup(dev, trimmed);
if (new_string) {
devm_kfree(dev, nsensor->current_state);
nsensor->current_state = new_string;
}
}
This function is only ever called from hp_wmi_update_info() while
state->lock is held, so the free-and-replace itself is properly
serialize